"There's a frog in my throat." "That's what Miss Piggy said." That was slick, almost missed it, lol. 2:27

I changed out the mags to Wilson combat.

I have one of their GI editions in 9mm. I would buy it again, it’s built well and runs great.

These budget friendly companies have been knocking it out of the park the last couple years. Obviously there's a noticeable quality difference between them and higher end, but to an new/average/modding buyer with thinner wallets, they are wonderful.

My wife got me a classic RIA 1911 A1 for my birthday this year. It quickly became my go to. I miss the lightweight Glock I used to carry, but I absolutely love my RIA .45 & unless I can get a antique 1911 Springfield, this will be the piece I have on me at all time.

I was having some failure to feed issues with my R.I. Tactical 45 ACP. A gunsmith told me my problem was likely the R.I. 7 round magazines I was using. He said, they have a flat follower that is most likely causing the problem. He said, get some Colt 7 round magazines, they have a round follower that allows for better feeding of the rounds. I tried it and he was 100% right.

Gonna be getting one of these in the next few weeks. I'm stoked!!!

I’ve got the “Tac II” (sans “Ultra”) which is the same gun except no rail, and traditional rear slide serrations only. Mine was made in October ‘21 and I acquired it in April of last year. First 70 rounds I put through it, had three jams. Since then I’ve probably put approx 600 rounds through it without a hint of trouble. I clean it about every 300 rounds, give or take. I have not made, and do not intend to make, any modifications. Got three mags for it; two ACTs (came with one ACT) and one Mec-Gar. All work well. It eats all ammo I have tried in it without complaint; two types of hollow point (Federal Punch 230 grain and Remington HTP 185 grain) and four brands of 230 grain FMJ range ammo (Winchester, Federal, S&B, and Browning). Mine set me back $700 out the door from Bud’s Gun Shop, including tax, shipping, FFL fee. Kudos to you if you’re willing to EDC yours. I consider it a bit too large for EDC. However, I do have an OWB belt/holster rig for it that is quite comfortable, and I carry it under my sport coat for “sheepdog” duty at my synagogue. Hope it never comes to that but if it does, I’m confident that my Rock won’t let me down. Terrific weapon, especially for the price.

Love your channel a lot. Thanks for your work!

Glad to see a newer review on RIA. I do appreciate the info. I'll definitely keep my eyes out for those KCI mags. Seems like they might be trying to cut corners or something. Like you said bad step in the wrong direction. They need to stick with MecGar.

I am absolutely smitten with mine, i carry it every time i leave the house, not too long ago i upgraded my recoil spring to a wilson combat flat spring, i believe it's a lighter spring than what was in it from factory, love it, got rid of the kci mags immediately, bought two wilson combat 10 round mags and 1 vickers tactical 8 round mag.

Great review and sense of humor. You got another sub.

I like a little oil and a fine polishing stone for the rails. Gets the high spots and keeps you straight. A little on the top on the disconnector too. Rock Island’s tend to be a bit high like Springfield Armory and can hinder cartridges from going into battery at first.

Great review with humor. Your awesome!

I highly recommend trying the CZ TS2! I bought mine back in February and haven't even wanted to buy another piece since then. The trigger is AMAZING! I bet it's only about 1.5 lb single action only, super crisp. I think it was worth the $1500 that I paid for it including tax.

I started three videos ago, his voice always lulls me to sleep. I think you need to do self help and anti-anxiety videos, sooooo calming.

love mine never has malfunctioned even with steel ammo and dirty, great shooter out the box

Full length dust covers are sexy. The screw in the trigger pad is an over travel adjustment, it bottoms out on the mag release, only affects how far rearward the trigger can be pressed.

I just got the 10mm FSHC and it's a really good gun for the pricepoint.

Got the Taylor's Tactical version of this gun and it is awesome. The only problems I have ever had with mine were cheap-ass KCI magazine related. One jammed up in the gun and took a lot of prying (on the mag) to get it out. The other apparently had wonky feed lips because the follower and spring just jumped out at the range and wouldn't stay in when I put it back together. I could try to fix it but meh, junk is junk. As soon as I swapped those junkers out with some nice polished stainless Wilson Combat mags, I have never had another issue with it. Fantastic pistol.

That's a good looking 1911 sir. My brain is also made of pudding.

I have the same pew pew! Thank you for sharing. Loved this video. Now I can not find a holster for this model, with that said could you recommend one or two? Once again thank you for your time.

I have a double stack one for $800. Love it no problems at all.

Love my Rock! Only use Wilson or Chip mags for defense. Any other mags for range.

good looking, sweet gun, for a price most people can afford! i definitely want one (or a few!) until i can get myself a nicer one

Very cool

Ria has been making good stuff for a long time now.

Nice, i like megard mag!

That gun is sick

nice tac 2 ultra sir. sir is this cal 40? or 9mm tac 2?

cool gun, been thinking about a "Baby Rock" myself. from a native Nevadan, it's "Nev-add-a".... the Sierra Nev-odd-a Mountains are in Mexico. PS, the guys at middletown are great.

I noticed my grips were similar to yours when I got mine. I inquired with Rock Island why the relief cut for my magazine release was small and didn't match any of their stock photos and they ended up sending me legit VZ Operator II grips in the mail that they used in their photos. Apparently some people are getting the real VZ grips like they should and some are getting a knockoff G10 grip. There is a noticeable texture difference, the knockoff feeling smooth while the VZ is a rougher texture and more grippy.

So I've been cc a taurus 1911 (my first 1911 besides my grandfathers original) and absolutely loved it but want to get a 2nd one. I've heard both sides of the proverbial coin "ria is trash save up and get a colt"..."ria is very good for a budget 1911" I remember seeing one on the movie swat which was a kimber and absolutely loved that style and this one has that same style. I was always a glock fan and still am but there's something about these that is just like a beautiful woman that doesn't talk you can just stare and work it like you want. Thanks for the video I am assuming since you said this will be your new edc that it's above par.

What holster did you end up buying for this pistol for everyday carry?

How does this compare to your Tisas Duty? I have a Rock Island and im considering a Tisas with a rail.

Turkish made 1911 are best option for budget tight people. Especially Girsan branded 1911.

I will say that KCI mag is depressing but Ive ran a couple in my glocks and they ran just fine

It’s like carrying a boat anchor on your hip all day but it’s a great pistol and a bargain compared to other 1911s.

i got the m1911 a2 fs match tact it says the match is hand fitted by a gunsmith .... I got it used and found a flat spring in it ... I hand cycled it until it became silky smooth .... took it to the range and it had minimal recoil and muzzle flip oh and it is 9mm . I am going to get Tisa 10mm next looked at one and Tisa builds a nice 1911 with forged parts ..... it feels like a crew serve weapon in my shoulder holster lol ..... been shooting and tuning 1911 for 46 years i am 61 now oucha .....

Like it alot, may be my next Gun.

Going the way of the Dodo 🦤 😂😂

I won't tell you whether or not you'll like it after the 220 fiasco, I will only say "Good Luck". 👍

What holster are you using for this gun?

Nice looking pistol; IMO, RIA deserves more respect than they get from the general gun community. My 'win the lottery' buy would be the 10mm double-stack cousin of your pistol... a total beast (and deadly accurate for a non-match pistol).

I had one in 10mm and loved it. Traded it for a glock like an idiot but I was a youngin thinking I needed something else I still kick myself for that trade. It’s an RTF2 glock 22 tho 🤷‍♂️🤣

I always polish whatever I can to any firearm I get. Less friction is always a good thing IMO.

Pretty sure they also keep the bullet that they fire through a gun for ballistics in case it turns up at a crime scene or what have you. I thought that was a law in the US but I could be wrong. Either way if you’re concerned about the bullet that the manufacturer might put into a database then what about the 4473 that you had to fill out to buy the gun in the first place? It just doesn’t make sense to me why some people are so jumpy about the idea when in reality in a SHTF or WROL situation the bullet is not the only way they’ll know someone owns a gun if they bought it at a store. Funnily enough these people who are paranoid about this usually don’t mind “flexing” on the internet with pictures of the guns that they “don’t own.” In reality if they keep a bullet from the gun I bought as a reference in case they find my gun or a bullet matching it at a crime scene it’s not too big of a deal to me. I don’t plan to murder anyone and the I had to fill out numerous forms before I got the gun that would all lead anyone with access to them back to me anyway so the spent casing that comes with a gun is the least of my concerns. I’m glad they test fired it… at least I know it didn’t blow up on the first firing.

How are you gonna get those grips on your glock

I have the pistol in the A2 configuration and no light mount. Best part it’s a double stack 16+1 10MM. Sweet shooter and oddly enough it’s accurate as shit. I only paid 450.00 for it 😂

Are the frame, slide and barrel hammer forged? Enjoyed the video.

Great dam gun!! I loved it! Double stack, got 2 extra clips. I paid 900$ heavy gun, love it!

640 where? Oh my bad I thought it was the double stack model in 45 acp

Sweet piece. Funny thing is delusional people online are asking $1,100 for this RIA 🤣🤣🤣

Just got rock island 1911 in 10mm that also came with the cheap kci mags. Any recommendations on mags for it?

Rock island guns only have one accompanying magazine each...why not 2?

How did you smooth the rails? Mine is quite stiff and could use a good polish job.... .....my gun ......er...uhm.....the firearm.

💯💯💯💯💯💯💯

i have this same Firearm and I know I will get ish for saying but mine is in 10mm, Why? just because.... HaVe A gOoD dAy!

That's what miss piggy said. Giggity

Electric Daisy Carnival

That was the oddest way to assemble a 1911.

I still prefer a Tisas. Receiver isn’t cast.

Only issues I've ever had was the stupid mag they come with

This are riding in tandem proven

GM

When i first saw it i thought rock island started doing 2011

It’s a Springfield TRP Operator for poors. This is not a bad thing

You’re new edc….. ok.

Pill

I dont wanna be that guy....but. Love these, hate the finish. Actually hate it on any firearm...yeah yeah i know...its durable....blah blah. Just ugly and dull. Rather just have blued. Actually, wish they made this in stainless...

Im not buying a gun with crappy mags.

You can get a spingfeild for that

Hate compact guns, heavier gun I love.

1911s with full rails look so nice