"Anyway, Josh is uncultured." 😂

I love how the tricked out glock jammed immediately.

"Josh coping" 😂

Was an NYPD officer for 22 years. One of the first things it did when I retired was to call Brownells and get two factory trigger springs so I could ditch these 12 lbs springs. Took a while to get adjusted to the lighter trigger.

Henry's face in the background of the thumbnail says it all

"Ricer Glock" broke me. 🤣 And the bullet holes are ragged because it's a Glock Memory Barrel™. Previous owner most likely imprinted hollow points into its memory. The barrel "remembers" and tries to simulate HP, regardless of the ammo type you actually use. Perfection.

One time i was at Capitol Armory in Austin, and was molesting a SiCo Maxim9 and upon the first pull of the trigger made an audible exclamation of "holy hell that's the worst trigger I've ever felt!" Long, gritty, heavy. The portly gent behind the counter then began to extoll the virtues of abysmal triggers to me as a "safety" feature and referenced the NY Glocks as evidence. Never went back.

The funniest thing about the New York Glock trigger is how the NYPD’s lawyers kept blaming their shootings of themselves and others on the trigger being too light, so in defending themselves from accountability they wound up with that shitty Glock trigger. Hope it was worth it!

Who would have ever thought a DA only revolver would be an upgrade as far as trigger pull is concerned.

I have a AIM Surplus NYC police trade in Gen 2 Glock 19. I've only changed the sights. My FFL installed Glock OEM trigger springs before I even picked the gun up from him, free of charge. He's a good dude.

Ah yes, the bystander-seeking trigger.

" We are ready to pull over vehicles, Josh!"

I have waited so long so see a review of the Glock 7!

"It being soft and dribbling out is totally normal." We all heard you, Josh.

For Josh: I’m pretty sure he knows how to shoot exceptionally well. My advice to viewers is. If your grip is not correct, re holster try again. Insure you get a proper grip. Drawing should be a about a three step two speed process. High speed to grip high speed to acquire front sight Slow way down as you acquire the dot and press out. That said I will admit this is more a reminder for me than anyone else. Josh shoots now in a day than I do in a year.

Would love an episode like this on Beretta's pistols. Great episode

1:42 Most gamer glocks end up being guns of Theseus

holy shit i just replaced my NY trigger in an LEO trade in i got.. Glock 21, had the 8lb.. it was horrible, and when i took it apart and found the spring i was like WHAT THE FUCK IS THIS because i hadnt seen one

Former LEO+military here: Can confirm, our equipment is always 'the best'. (If by the best you mean by buying it off the first vendor that pitched the 'modularity', low maintenance cost and if you buy it now you get a 5% off bulk deal)

I think it's interesting that what started as a comparison between pistols turned into a good introduction to methods of improvement with dryfire and live tire.

Kinda like buying a new Jeep, you pay a fair amount of money so you can remove everything from the factory other than chassis, replace it all with aftermarket stuff to get the thing you wanted in the first place. 😂

A few weeks ago, when the whole "glocks are gtg, see i carry a stock glock" thing happened, i just felt like something was missing... Now i know, it was you guys

Henry’s screaming while ear pro is engaged is so awesome

My fudd heart is full seeing Henry carrying the revolver!!!!

Back in 2005-2007 the NYPD police officer that used to hang out at my local Subway stop in Bed-Stuy carried a revolver in a leather holster that looked to +20 years old and as soft as deer skin gloves.

An ATF "leading expert" struggled to disassemble a Glock pistol. How did Henry do it so effortlessly?

Josh rocking that Kore belt. Almost offsets him not getting the Die Hard 2 reference. I approve, too many people sleep on the Kore battle belt.

I like the fact that going in so dangerous place with unproven gun, Henry did not forget backup weapon and even chose revolver to hedge against autopolymeric technology.

I have a fresh gen 3 17 and its a such a great shooting gun. Overall, stock 17's are amazing handguns, but you need skill to figure that out

Most important thing I've learned about draw and fire practice is you need to work through any unexpected issue, especially with concealed carry. Did you draw fast and accidentally grip some of your shirt or maybe didn't clear it properly? DO NOT RESET. Work through the mistake safely and continue. If you do not train THROUGH your mistakes you wont know what to do when it happens. If you practice your CC draw and reset because you dont clear your garment you're making a vital mistake! This applies to OWB as well - If your grip is off on your draw.... work through it! Do not ever reset.

Everyone always talks about how Glock came out of nowhere to win a contract w/ the Austrian .mil, but lest we forget, he was already making bayonets for the AUG. Not detracting in any way his achievement in developing the pistol, just pointing out that he was already quite familiar w/ dealing w/ .mil bureaucracy and contracts, etc...

I had someone on a post I was in saying never buy a Glock or High Point. Asked why he said that, his response Glock are so unreliable, His has broke the firing pin multiple times with in 300 rounds.. Have never heard or experienced this.

I have had absolutely zero issues with the radian afterburner and ramjet setup with thousands of rounds of range and defensive ammo. No weak ejection or anything.

That was a great video thanks!!!

Fantastic, really enjoyed, thanks

Nice job Henly!

Ricer Glock may be the most cutting insult I've heard this week and I'm absolutely stealing it

When I started working on Glocks in early 2001, I experimented with the combinations of the polymer inserts for the trigger spring. I actually prefer them, specifically the 8lb in concert with a 3.5 connector. The advantage is a smoother trigger. The insert pushes up on the cruciform, giving better engagement. It also gives a delrin surface for the cruciform to move across. The 8lb insert with a 3.5 connector gives an average pull weight (on a manual gauge) of around 5 to 5.5 lbs. The Gen 5 trigger spring system works similarly to these old inserts. A Gen 5 is basically a Gen 2 with a modified insert system and an accurized barrel.

I guarantee that that factory gun is more reliable than the Gucci Glock

Enough about the tupperware, tell us more about what's in Henry's holster!

Absolutely love this video guys I have a "Gucci" and a oem with only glock performance trigger in it and I ha e to say even tho I like the comps and dots the oem just has something that I just love the simplistic reliability

Just a heads up, NYPD has gone back to the stock trigger for incoming recruits for the past couple years. There’s also an attempt to get a program together to retrain officers and convert the rest of the job to the stock trigger.

You keep your dirty hands off of that Glock.

Henry lost some weight, looking good man! Stay healthy 💪

NYPD switched to the stock 5.5 LB trigger starting in the summer of 2021. Only new recruits got the light trigger. Everyone else kept the 12LB triggers.

As a Puerto Rico,USA police officer I can feel it for my NYPD brothers. Government decisions over police equipment rarely stops disappointing. Couple years ago we changed from M&P .40 to Sig Sauer P320 Carry. Not to bash the P320 but I preferred the M&P.

I just rewatched Ahoy Iconic Arms Glock episode, then this comes up? Man, my interest in Austrian firearms is really getting to me.

19:40 Josh is shooting so fast you would have thought an acorn hit the table...although he was hitting his target.

I am betting my left testicle that Josh is running a 336 ejector. My ported Glock started throwing casings to the left and the updated GEN five ejector fixed my issues.

If you're focused on the dot instead of target, the shooter's perception of where the dot is in relation to the target can be skewed when shooting/dry firing fast

I love that intro graphic . 🔥

"My Gucci Glock just shoots low and left!" -Josh 🤣

Love the small edits here and there. :) That police barrel do bring that +10 dmg, lol. It's nice to see in comparison that training makes perfect. Before you jump into racing gear make sure your fundamentals are set right.

The first Glock I ever shot back in 2002 had one of these NY triggers (it was at a gun range) and I was convinced it was the worst gun of all time. I never recovered and still hate Glocks to this day even though I know how good they can be. Talk about a hardware solution to a software problem.

Literally just rewatched Die Hard 2 last weekend so this had me cracking up.

Josh is contemplating all his life's choices after the first two rounds of the nypd 12lb trigger glock, "why did i mod my own gun again?"

Die Hard reference and an NYPD gun. . . . Nine Nine?!

20 years ago when I started with my Department, I was issued a Gen 2 Glock 22 with a NY trigger. I hated that trigger but I loved that gun, I cried when I had to give it up for a Gen 3. I still remember the serial number of that gun but I can’t remember any of the guns issued afterwards ( I’m on a Gen 5 now and soon will be issued a Gen 5 MOS).

You know....most shooters would do well to practice often with a VERY heavy trigger pull like a DA revolver with stiff springs. Once you train enough to be competent with the worst trigger in the world...which you CAN with practice...then ANY pistol you pick up you'll do even better with. Only shooting the very easiest trigger is like weightlifting using only the naked bar....progressive increasing resistance is how you improve.

I like this slightly more scuffed episode format!

Carried a Sig 229 and a Sig 2340 on duty for years. Both 357 sig and both DAO. If you can shoot, you can shoot it well.

At the end of the video perhaps the target is showing "ragged" holes as it is moving back and forth as the bullets hit it... a while back I thought my Glock 19 was keyholing, but it was actually the bullets hitting the target as it was moving from the impact of the bullets.

A few months ago, fired a Glock 21 Gen 4 and a Rock Island 1911 side by side- the Rock Island (which is nowhere close to a high-end or tuned 1911) was so much more accurate and pleasant (entirely due to the trigger).

Don't remember having gen3 G17s for the NYPD. Only gen4 G17/G19 and gen2/3 G19.

Good job Henly!

Newly minted Glock shill Henry: "Nein! Pistole ist fein"

Glock OEM minus connector spring is factory approved for duty use when combined with NY1 spring. The combination is actually very nice and the ny1 spring is actually much more robust and durable than the original trigger bar spring. Green polymer is ny1, orange polymer is ny2. Check out the Todd Louis Green designed SCD, or Striker Control Device too. And i like how both of you practice muzzle discipline.

This channel is getting better and better. I like these informal range videos. Chill. Funny. Keep it up! Also…FJB!

In terms of split times "stock NY glock" had on average 7 frames between each shot vs 6 frames between each shot for the "tricked out glock".

I learned how to shoot pistols on my uncle's ex nypd g19. The 12 lb trigger was crap (still is) but it's not completely awful. I still shoot it every once in a while.

3:50 and don't forget the horse SEMEN

the glock jammed because the shell hits your optic. another reason to never run SRO's. it has nothing to do with range ammo at all.

Now do the draw from a level III duty holster. At least we use stock triggers and night sights. All my Glocks have had the sights changed out, it’s the only thing I don’t care for about them. The stock triggers get nice over time.

the copium is telling

What make and model of revolver holster is Henry using? I need a similar holster for my 4 inch Colt Python. Any store that ships to Spain? Thank you

Back in the mid 90's I bought a Glock 19 from a police detective and it had the 12Lb trigger. I hated it so I called Glock in GA and asked for their 5Lb trigger installed, the fellow said they would be happy to do so. He called me and said the trigger was installed and they installed their weather resistant parts in the frame, I asked how much I owed and he said NO COST! Great company!

ngl Georgia gcpd has a really nice duty glock with a red dot and that thing is amazing

What's the holser Henry is using? I've never seen any SLS holster for revolver.

People talk a lot of sh*t but I find stock Glocks really intuitive to shoot, and I think that came out in this demo.

I was a NYC police officer from 1974 to 1994. In the late 80's I was a firearms instructor at the NYC Police Academy when Gaston Glock introduced us to the Glock 19. At the time, Glocks came with a 3lb, 5 lb or 8 lb trigger. Don't know why, but the department went with the 5 lb trigger. I would've opted for the 8lb trigger as NYC cops were used to S&W Model 10 revolvers that had 13lbs triggers. Anyway, we started have negligent discharges that were blamed on the light trigger. So, we had all the police officers that had Glocks, come back to the range so that we could retro fit them with was the first of the NY triggers. I think, if we had just instilled better firearms safety training, that would've been better. But, who am I? I believe a second NY trigger came later. I don't know if they ever went over the 8lb trigger. I own a Glock 19 gen. 5 MOS. That, I believe is the Glock perfection. In my humble opinion.

Can y’all test a Grendel AR on the course? I understand it’s not in the typical scope of the channel, but I’m curious how it would perform.

Great thumbnail lol

Excuse me but what is that holster you've got that smith and wesson in? I've been wanting a QLS compatible Model 10 holster for a long time.

I think the 12# trigger was the reason I initially hated Glocks. Once I got one with a normal factory trigger I have grown to love the Glock. What I don’t care for is the Glock haters that bitch about that lack of innovation. 🤦‍♂️ it was designed as a service and duty sidearm. It fits that criteria perfectly. If you want to “make it your own” you can but don’t hate the gun for being a basic functional perfectly capable firearm. It’s a pickup truck. If you wanted a Porsche don’t bitch about the truck you bought. The 1911 is the same gun basically unchanged for 113 years. Yet I don’t see nearly the level of hate. And people freely customize them with an entire industry supporting the aftermarket parts for them. Too many people want their “ideal” gun write out of the box. Here’s a clue. The ideal gun don’t exist. You either need to modify your gun or accept the current configuration. It’s that simple. Guns are tools not fashion accessories.

Just so you understand, the NYPD also issued the P226, and the S&W.5946 all have the 12lb trigger. Same with the off duty 9mm pistols authorized. Glock 26, p365

Do i see a Jackel review coming,from the opening shots?🤔

What kind of holster are you using?

Not that I am advocating for the NY+ trigger, but you would be surprised just how well you can manipulate such a trigger with practice/ training. Josh switched over from his race gun and demonstrated this quite well.

Do you have the radian spring kit running with the ramjet? If so, what pound did you go with

7:11 "ricer Glock" 🤣😭🤣😭

I must ask, what holster is that revolver sitting in?

I had one of those nypd glocks and I just thought it was the famously bad glock trigger everyone talks about

Now several years ago I picked up a Gen 2 Glock 19 that was an NYPD trade in gun with these atrocious triggers in them. I tried it out once, ripped that policy mandated garbage out and installed the typical stuff and it's still the only actual Glock brand Glock that I own. For anyone who hasn't dealt with this trigger, it takes the typical 'squish' of the glock trigger and just makes it require more strength. It reminds me of the older SD9 triggers.

As the owner of an SRO I can confirm that RDS is hax.

What other fantastic Christmas movies has Josh not seen, i wonder?

I know I’m talking revolvers here, but Jerry Miculek once stated he ran extra heavy springs in his revolvers.

"Nein! Glock is fine" seems to be Henry's approach in this case

Dang It HENRY!!!!!!! I had to pause the video because of the coughing you yourself induced at 1:22....ya jerk! LOL

Henry going Jimmy Smits with that NYPD Glock

Remember, if you master a 12lb trigger, a gucci trigger with be even easier. If you only ever shoot gucci triggers, more often than not, you'll struggle with standard/milspec triggers.