No video

FIRST TIME BUILDING GOLF CLUBS / Beginner Step by Step

  Рет қаралды 19,675

ELITE FIT GOLF / Mobile Clubmaker

ELITE FIT GOLF / Mobile Clubmaker

Күн бұрын

In this video, Keenan builds his very first set of golf clubs. Watch him go through the process step by step and he builds a new set of Sub 70 irons.
Be sure to follow me on my other channel
/ elitefitgolf
Follow me on Instagram
@MobileClubmaker

Пікірлер: 47
@dagerz1315
@dagerz1315 Жыл бұрын
No better gift than knowledge
@mksmith713
@mksmith713 Жыл бұрын
When you remove grips from an old club, save them. Cut them long ways and keep them around. When you need to swing weight, set of clubs, sort through your grips that you have find one that matches the weight that you want and just slip that over the Griffin to the club when you swing weighed it. It’s more accurate than rubberbanding it to the shaft.
@jonathanwestbrooks3091
@jonathanwestbrooks3091 Жыл бұрын
Again, so cool to watch 🤙🏾 thanks for sharing!
@matthew.dehaven
@matthew.dehaven Жыл бұрын
Wish i watched this before i did mine! ha. I didn't know about swing weights when i built mine up, so i have no idea what mine are. Took my old heads, bought some shafts on ebay, and put them together. And now that i'm learning more about SW... it makes me wonder!
@edj9961
@edj9961 Жыл бұрын
Team sub70 baby
@wadepatton2433
@wadepatton2433 Жыл бұрын
Fun just to witness a novice with power tools and epoxy. Birdies to y'all!
@cybekgolf
@cybekgolf Жыл бұрын
I like to use a deburring tool for the inside of the shaft after its cut to remove sharp edges.
@brianthornton5345
@brianthornton5345 Жыл бұрын
Looks like fun
@flippperboy
@flippperboy Жыл бұрын
Great video. Thanks
@bobkirkwood2992
@bobkirkwood2992 Жыл бұрын
Use denatured alcohol, not grip solvent, for epoxy cleanup
@stevebutel9088
@stevebutel9088 Жыл бұрын
Was the goal to have the irons at C7 swing weight?
@andycobb3555
@andycobb3555 Жыл бұрын
Great video! Any chance you have a list of supplies/equipment needed to do this? Will continue watching videos maybe you already have a video on my list question.
@anthonygonzalez8953
@anthonygonzalez8953 Жыл бұрын
Great videos...just found you...wondering if you could direct a new builder on where/how to purchase shafts/clubs/weights general club builder material?
@EFGMC
@EFGMC Жыл бұрын
Golfworks, Billy Bobs, Grips 4 Less are all good options for shaft, grips, and tools/supplies.
@billybobtimm1787
@billybobtimm1787 Жыл бұрын
Watched a lot of your videos. Where do I find the tool you use to clean out the hosel (not the brush, I have one of those)? Does the length of a club include the grip? I have many more questions, but thought I'd start with these.
@EFGMC
@EFGMC Жыл бұрын
The sanding dowels can be found on most club making websites. You should include a 1/4 inch to your measurements to account for the additional grip end length.
@tonysanta3497
@tonysanta3497 6 ай бұрын
😂😂😂😂 Just like when I was taught. You want to be so careful and move so slow, a bird can swoop down and build a nest on you! In a year, he will be moving like lightning!
@alejandrogarrido2372
@alejandrogarrido2372 Жыл бұрын
Great video. How do you know that the shaft flex is going to be the one that the client needs before asembling all the clubs?
@EFGMC
@EFGMC Жыл бұрын
We did a fitting before deciding on these shafts to figure out both weight, flex, and feel.
@alejandrogarrido2372
@alejandrogarrido2372 Жыл бұрын
​@@EFGMC Thanks you for your answer. The doubt I have is, in the fitting you decided what cpm/flex is right for the client, but how do you make sure that the clubs are in the correct flex/cpm when assembled as you didn't check anything before and after cutting the shaft.
@user-oo5mx7bo7y
@user-oo5mx7bo7y Жыл бұрын
Hi , I have an old set of Top-Flite irons 1998 I think, dynamic gold shafts at 120gr and I was losing distance, I tried some clubs with a 60gr shaft (R) and was wondering if soft stepping would be the way to go, distance was back maybe 5 yards better, I'm getting on a bit now (65) but I really like the top flites when they're polished up , any help would be very much appreciated
@EFGMC
@EFGMC Жыл бұрын
The stepping of an iron shaft will only have a very very small impact on the results. I would just focus on finding the right weight and not worry about soft or hard stepping.
@user-oo5mx7bo7y
@user-oo5mx7bo7y Жыл бұрын
Many thanks for taking the time to reply, I've managed to get all the headweights in a steady progression (7-9grams) now for all the hard work .
@Karlsamsung-mt9yw
@Karlsamsung-mt9yw 25 күн бұрын
Is the butt ends 0.600 or 0.605 on them 105
@dennissmith1904
@dennissmith1904 Жыл бұрын
Do you always swing weight match your clubs or do you sometimes do MOI match?
@EFGMC
@EFGMC Жыл бұрын
I ideally like a hybrid model where the long irons are a point or so lighter and the 9 into wedges are a point or so heavier.
@dennissmith1904
@dennissmith1904 Жыл бұрын
@@EFGMC based on reading stuff from Tom Wishon and on Golf WRX i built myself a poor mans MOI matching set by going with 3/8" increments in length and 0.5 swing weight les as clubs get longer. Have really liked it
@04awby
@04awby Жыл бұрын
Do you know of any process to take a traditional iron and give it a black or copper finish?
@EFGMC
@EFGMC Жыл бұрын
I know of companies that do those sorts of refinishes, but how they do it is out of my expertise.
@Kridian01
@Kridian01 Жыл бұрын
Go to *Brad Meehan's channel.* He's a DIY'er and he did a copper plating of some old Walter Hagen irons. kzfaq.info/get/bejne/hrljrLOV3LyqlKc.html
@AlexLiSince1983
@AlexLiSince1983 Жыл бұрын
White shirt, khakis, dust, epoxy, and acetone.
@clintwestbrick664
@clintwestbrick664 Жыл бұрын
Hi, interesting for me - you just cut the shaft at the butt. Are these shafts taper tip or whay did you no tip trimming? BR
@EFGMC
@EFGMC Жыл бұрын
Taper heads, and taper shafts.
@marcstubbs581
@marcstubbs581 Жыл бұрын
You tip trim parallel shafts.
@clintwestbrick664
@clintwestbrick664 Жыл бұрын
Yeah, I know.
@cybekgolf
@cybekgolf Жыл бұрын
@@clintwestbrick664 the Nippon trim instructions for parallel tip say butt trim only
@clintwestbrick664
@clintwestbrick664 Жыл бұрын
@@cybekgolf ok, thanks. Didn't get it that they used Nippon shafts.
@stephanparis6887
@stephanparis6887 Жыл бұрын
How/where do you get single length shafts with equal weight?
@EFGMC
@EFGMC Жыл бұрын
What do you mean single length shafts?
@tommylogan8237
@tommylogan8237 Жыл бұрын
Could you do a video without the special tools?
@EFGMC
@EFGMC Жыл бұрын
kzfaq.info/get/bejne/qN17pNif2d_QnYE.html
@andyrcampbell
@andyrcampbell Жыл бұрын
I have watched you measure the swing weights in a couple of videos but then you don’t show adjusting it . Where to the weights go ?
@EFGMC
@EFGMC Жыл бұрын
In most cases I use shaft tip weights that fit inside the shaft before you epoxy the club together. It's the cleanest looking option.
@stevebutel9088
@stevebutel9088 Жыл бұрын
Why didn’t you spline the shafts before assembling?
@glenburr6755
@glenburr6755 Жыл бұрын
It’s painful watching newbie’s. 😂 He did a great job though! Enjoy your new sticks! ⛳️🏌🏽‍♂️
How to Build Golf Clubs CLOSE UP
15:51
ELITE FIT GOLF / Mobile Clubmaker
Рет қаралды 20 М.
How to Build a Custom Golf Club
29:17
McGolf Custom Clubs
Рет қаралды 12 М.
Fast and Furious: New Zealand 🚗
00:29
How Ridiculous
Рет қаралды 49 МЛН
لااا! هذه البرتقالة مزعجة جدًا #قصير
00:15
One More Arabic
Рет қаралды 51 МЛН
Making A Golf Club Out Of Osage Orange
11:43
Andy Rawls
Рет қаралды 564 М.
BUILDING GOLF CLUBS INEXPENSIVELY / NO COSTLY TOOLS USED!
16:46
ELITE FIT GOLF / Mobile Clubmaker
Рет қаралды 52 М.
I FORGED MY OWN GOLF CLUB (...does it work?)
13:35
Peter Finch Golf
Рет қаралды 178 М.
CUSTOM IRON BUILD | Miura KM-700 x Fujikura Axiom | Loggerhead Golf
12:08
Never Make These Swing Weight Mistakes
11:22
ELITE FIT GOLF / Mobile Clubmaker
Рет қаралды 70 М.
Never Do This When Reshafting Golf Clubs
10:43
ELITE FIT GOLF / Mobile Clubmaker
Рет қаралды 55 М.
Playing a Golf Match - $30 Clubs VS $3000 Clubs
39:15
gm__golf
Рет қаралды 2,3 МЛН
HOW TO BUILD A DRIVER // Behind the Scenes of the TXG Build Shop
13:01
BUILDING MY NEW IRONS FROM SCRATCH... AT HOME!?
24:05
James Robinson Golf
Рет қаралды 76 М.
GOLF CLUB BUILD - How to reshaft your irons Step by Step
22:36
ELITE FIT GOLF / Mobile Clubmaker
Рет қаралды 180 М.