First Time Fletching My Arrows - Tac Vanes on Victory Vap TKO

Рет қаралды 1,617,341

Жыл бұрын

I finally settled on the exact length, point weight and nock that I wanted to use so I trimmed off a little bit on my arrows. The half-outs were super glued in so I had to trim from the back. The wraps are from Tac Vanes and lighted nocks from Glory Nocks. I also changed my let-off from 85% to 80% and I like that a lot better!
Hoyt Ventum 33 - 65#
Point: Bullet 125gr
Half-Out: 50gr
Wrap: 6gr
Vanes: 3-Vane Config. 18gr Total
Glory Nocks: 15gr
Arrow: Victory Vap TKO Gamers
Spine: 350
Speed: 260fps
FOC: 14%
Affiliate links:
Arizona EZ Jig
amzn.to/3L5IpoD
TAC Vanes
amzn.to/3YsDOjr
Victory VAP TKO Arrows
amzn.to/3T2xf5Y
Black Eagle Pin Bushings
amzn.to/3L53Upy
Arrow Spin Tester:
amzn.to/3kUDcp4
Zenith Archery Products Bitzenburger Upgrade Kit
amzn.to/3J0PzaT
Bitzenburger/Zenith Fletching Jig and Clamp with Upgrade Kit
amzn.to/3mBtW9R
DELTA MCKENZIE SPEEDBAG Target
amzn.to/3msZazG
Block 6-Sided Arrow Archery Target
amzn.to/3J1Lwv1
The Best Arrow Puller
amzn.to/3mrcxQT
Cheaper Arrow Puller
amzn.to/3YwuMSy
Arrow Wraps
amzn.to/3l6u40p
_________________________
My Camera Gear:
Canon 6D MK2
amzn.to/3ITV0IM
Canon 70mm-200mm Lens
amzn.to/3ZyEgOo
Sigma 24mm-105mm Lens
amzn.to/41SbycZ
Rode Mic
amzn.to/3T3TDMs
Camera Batteries
amzn.to/3JqOYAO
Camera Bag
amzn.to/3mEnLBT
Peak Design Camera Clip
amzn.to/3ZyITYM

Пікірлер: 71

@edr9276 Жыл бұрын

Beautiful

@MasterofNone365 Жыл бұрын

Thank you for watching!

@caldwell5078 Жыл бұрын

Now this is a short worth watching!! Thank you

@MasterofNone365 Жыл бұрын

Thanks for the comment and thanks for watching!

@akhalid3263 Жыл бұрын

Super

@abtinarianpoor8077 Жыл бұрын

Easton arrows? Nice job, excellent 👏🏻

@MasterofNone365 Жыл бұрын

Victory VAP TKO. I like them so far!

@weareamericashopeandfuture8224 Жыл бұрын

Hey Robin Hood. I’m in need of money 🤷🏻‍♂️🤣

@Red2001Rum Жыл бұрын

His experience needed in walking dead.

@MasterofNone365 Жыл бұрын

Haha!

@timurzarifov Жыл бұрын

На самом то деле, там самым эффективным оружием было бы копьё. Но персонажи фильма всегда сами себе создают проблемы и усложняют процесс истребления зомби.

@darcywood4637 Жыл бұрын

I prefer bohning x vanes over tac ,nice video

@orionswick9204 Жыл бұрын

Nice

@MasterofNone365 Жыл бұрын

Thank you!

@luizbarbosa4346 Жыл бұрын

Interessante q a maioria das flexas do hemisfério norte usam empenagens retas, enquanto nossos aborígenes as usam helicoidais, o que dá muito mais precisão no tiro, como mas armas de cano raiado, versus as de cano liso !!

@brandonkrajeski548 Жыл бұрын

I see you are running a right helical on your fletching. I found my Ventum Pro 33 has a natural left spin so I began fletching all my arrows with a left helical. Have you considered or do you have an opinion on this one?

@MasterofNone365 Жыл бұрын

I have tried left, right helical and right offset and to me, I haven’t noticed a difference in grouping. I’ll keep testing and messing around with different setups. Have you noticed a difference? I think what affects arrow flight more is how much helical or offset you have. I’ve only shot out to 60yds so far but I want to try it at 100yds.

@josegregoriomoralesferrini4587 Жыл бұрын

Robin hood

@praveengupta6139 Жыл бұрын

I want to khown background music on this video

@MasterofNone365 Жыл бұрын

Else - Paris

@TannerJPrice 29 күн бұрын

What’s the file you used after sawing?! Looks super handy

@MasterofNone365 29 күн бұрын

It's an arrow square made by G5. It's badass! Thanks for watching.

@TannerJPrice 29 күн бұрын

@@MasterofNone365 I gotta pick one up asap!

@MasterofNone365 29 күн бұрын

@@TannerJPrice if you don't already have an arrow saw, I'd definitely look into the ModSaw. That thing has a saw, an arrow spinner and arrow square all in one. If I did it all over again, that's what I'd buy.

@TannerJPrice 29 күн бұрын

@@MasterofNone365 bro, that sounds so money! I’ve got the DeCut arrow saw and pine ridge spinner, I wish I knew of the mod saw when I started loading up!

@billbobagginsbonham9239 Жыл бұрын

F.O.B. u never need to do ANYMORE!

@alepalla9899 Жыл бұрын

What is the name of the device used to front the tube?

@MasterofNone365 Жыл бұрын

Sorry I don’t understand the question. What do you mean “front the tube”?

@ryanhockenberry2045 Жыл бұрын

Fletched them really far down the shaft. Since you aren't shooting fingers you should really put your fletch as close to the nock as you can. It gives them more leverage to steer the arrow if you have any release flaws

@MasterofNone365 Жыл бұрын

Thanks for the comment bud. "Really far" is quite the exaggeration though. haha. They're actually exactly 1" from the end of the shaft, which is also the same distance as how they're fletched from the factory. I like to anchor behind my ear and the previous AAE vanes were making contact with my face. These new Tac Vanes don't so they're the perfect distance from the end for me. I could do some testing and shift them back maybe 1/4" but I doubt I'd see any difference in my groups. What setup are you currently shooting, man?

@ryanhockenberry2045 Жыл бұрын

@@MasterofNone365 fmj 300s with standard blazers. Mine are 1/2 inch from the end of the shaft. 50 gr brass insert 100 gr heads (montecs). Same bow. Ventum pro 33 in all black. Pretty wicked setup so far.

@ryanhockenberry2045 Жыл бұрын

@@MasterofNone365 also i get that. My anchor is pretty high, so by keeping my nose touching the string i still have plenty of face clearance from my fletch. I anchor with my wrist underneath my ear and thumb knuckle on my jaw

@MasterofNone365 Жыл бұрын

@@ryanhockenberry2045 I see. So you're kind of making a C-shape with your thumb and index, right?

@ryanhockenberry2045 Жыл бұрын

@@MasterofNone365 yep. Almost a full circle by the time my release breaks

@Universal111. Жыл бұрын

😍😍😍🥲🥲🥲

@artemkoziarskyi9691 Жыл бұрын

How google this matterial for buy?

@MasterofNone365 Жыл бұрын

Which material? The vanes or all the tools?

@williammutchler9722 Жыл бұрын

Where to buy

@MasterofNone365 Жыл бұрын

Which item? You can get pretty much everything on the Lancaster Archery website.

@DRIECUTHoney Жыл бұрын

Sorcery, lol. I can’t get tac vanes to stick consistently. Got two arrows total….

@MasterofNone365 Жыл бұрын

Lol. You have a problem with adhesion even with their own primer and glue?

@DRIECUTHoney Жыл бұрын

@@MasterofNone365 I even tried using the tac wraps as well. I’m at a loss.

@MasterofNone365 Жыл бұрын

@@DRIECUTHoney Hmm...that's weird. What jig are you using to fletch? I've used both the Bitz and Arizona EZ jig and haven't had an issue. I had 1 vane come off but that was because another arrow grazed the shaft and nocked it off.

@DRIECUTHoney Жыл бұрын

@@MasterofNone365 I’ve got the bohning jug that’s similar to a bitz, and a helix tower jig. Had better luck with the tower jig, but I think the slots might be too wide? That’s all I can think of. The base on the tac vanes are small.

@MasterofNone365 Жыл бұрын

@@DRIECUTHoney I'm no pro so I'm only guessing that the tower jig just puts more pressure on the shaft to give you better contact. I'm not familiar with the Bohning jig but I know that if you don't adjust the Bitz with the right angle, you won't get as much surface area pressed onto the shaft. You could try the Arizona EZ jig. I notice that it gives me more consistency. The only bad thing with it is that I do get some gouging on the wraps right next to the back of the vane. It's not a huge deal but it's annoying to see the wrap get torn.

@RockyMountainWest13 Жыл бұрын

What squaring tool was that? And what’s up with all the Russian comments on here

@MasterofNone365 Жыл бұрын

It's made by G5 Archery. It's the older version so they have a newer one out now that I think is better. Lol. I haven't kept track of the Russian comments.

@user-br8fo5dz5l Жыл бұрын

Вопрос: если стрела - это по сути расходник и её изготовление несложно, то почему такие конские цены?

@dedmazai007 Жыл бұрын

При должном уходе и опыте хорошая стрела выдерживает тысячу! выстрелов. Вот и думай.

@shamal9116 Жыл бұрын

우리나라가 제일 잘 만들겠지?

@mxicros Жыл бұрын

why did you cut that small part?

@MasterofNone365 Жыл бұрын

It was a little longer than I liked. I added another 25gr to the front so I wanted my arrows to be stiffer by making them as short as I could. Thanks for watching!

@mxicros Жыл бұрын

@@MasterofNone365 I am not an expert, but when I shoot I do it with the longest arrows possible, because I open a lot. In my collection of arrows I have a variety of lengths (one inch difference) because they are the longest I can find

@MasterofNone365 Жыл бұрын

@@mxicros very cool. What bow are you shooting? Have any videos to share?

@mxicros Жыл бұрын

@@MasterofNone365 my bow it's a 48lb 68" long bow, "Eagle". No, i haver any vídeo😅

@jimr898 Жыл бұрын

Love my jig. Just don't use your technique lol.

@MasterofNone365 Жыл бұрын

What technique do you use?

@jimr898 Жыл бұрын

@@MasterofNone365 not the wrap up on vanes part of shaft. And gots no sander like you have Lol.

@MasterofNone365 Жыл бұрын

@@jimr898 if it works for you, then it works for you brother! 👊🏼

@anthonyforfare7223 Жыл бұрын

@@jimr898 not a sander friend it’s an arrow squaring tool. Just trying to be helpful.👍😁🏹

@johncuthbertson2565 Жыл бұрын

First time eh 😂

@MasterofNone365 Жыл бұрын

Though ugly, I got them to stick. Lol. I didn’t find out till just recently that a lot of people have a hard time getting them to stick. I guess I got lucky.

@johncuthbertson2565 Жыл бұрын

@@MasterofNone365 mine ALWAYS fell off, I'd go to pick them up and bits all over the floor 😭

@MasterofNone365 Жыл бұрын

@@johncuthbertson2565 aw man. That sucks. You used the primer pen too? The only time I had a fletch come off was from shooting one off when I was shooting groups. So strange you have problems with it.