First time using a plasma cutter testing out the Bestarc BTC500DP.

Рет қаралды 7,806

8 ай бұрын

Tool test time.
Big thanks to Bestarc for sending in one of their plasma cutters to test out. The BTC500DP.
They obviously must have a load of confidence in their tools, as they sent this in to me to test out, knowing iv never used one before.
Suppose it shows how easy it is to use.
Have to say, I did injoy using this, very easy to use, setup and gives very good results for even a compleat novice like me.
The LED display appeared to flash in the video, but this was only due to the video frame rate.
Well worth a look if your looking to pickup or try out a plasma cutter. This seems like a very good mid range machine, not the cheapest option available, but also not overly expensive for the quality of the cut.
www.amazon.com/dp/B0C6G3SQ3W?...
amzn.to/47ujtj3
#plasmacutter #plasma #cluttering #steelcutting #metalworking #tools #powertools #deandohertygreaser #fixingtools #workshop #bestarc #btc500dp #cooltool #tooltest #unboxing #review #testing @BestArc-offical

Пікірлер: 26

@peterferguson2344 8 ай бұрын

That was impressive, even for a 1st timer. You couldn't get a better review of your product 👍

@015diesel 8 ай бұрын

Another brilliant video, very informative as usual, thanks very much and fantastic effort 👌

@ToolTimeToday 8 ай бұрын

top notch video. your reaction at the end of the video when you knocked the slag off from the cut was priceless. i need a plasma cutter for sure at some point as cutting with an angle grinder can be a little tedious.

@johnwallis96 8 ай бұрын

Well done your a natural 👍👍

@robertweeks7993 8 ай бұрын

dude that is sick as all hell

@daig1984 8 ай бұрын

Cool little machine, thought the cuts looked spot on tbf

@rosscog155 8 ай бұрын

Great demo. Throw a set of wheels on the head and it should be smooth to drag over the steel. That is spectacular looking tool kit. Great to see it in action!

@hu5116 8 ай бұрын

Great demo. Need more amps and pressure for that thickness

@raymondhannon5307 8 ай бұрын

The slag is called dross it chips off easy you get that regardless it has a lot to do with speed and air pressure if there is moisture in compressed air the consumables tips will burn out prematurely and you will get bad cuts. Nice clean cuts for a budget machine .

@deandohertygreaser 8 ай бұрын

Thaybwhatbi thought. Yes I'd say you are right with the air quality. The cut surface quickly developed a skim of rust that you can see in the video. I'd say my compressor has a lot of moisture in it. It has been a while since i drained it. 😆

@raymondhannon5307 8 ай бұрын

@@deandohertygreaser I have a inline moisture trap on air line on hand held plasma it makes a big difference on consumables and an air dryer on CNC plasma table which all plasma should be run on .

@ther3tard475 8 ай бұрын

Love the channel! So much information. Short and simple! What do you think of wera tools in general?

@daingiordano6830 8 ай бұрын

That seems a very nice lil machine there. Very user friendly. And wow it’s compact. Any way of getting one in the states? Great video regardless. Thank you Dean.

@stich1960 8 ай бұрын

This looks to be a different flavor than mine, but they look like the same machine. There's definitely plenty of cheap options on Amazon that look to be exactly the same

@cidercreekranch 8 ай бұрын

Amazon has the for $199 as a Cyber Monday deal.

@deandohertygreaser 8 ай бұрын

They are available in the states, and at very good price by the looks of it. They cost over twice as much here

@kevinhewitt1428 8 ай бұрын

Your amazon link brings you to a flashlight.

@deandohertygreaser 8 ай бұрын

My bad, thanks for letting me know.

@kevinhewitt1428 8 ай бұрын

@@deandohertygreaser Better than a Fleshlite

@pointedspider 8 ай бұрын

Good morning sir. I have a question. I have an old Milwaukee 2401-20 screwdriver. This tool is literally my right hand. Well....the brake stopped working causing the motor to run after releasing the trigger. This bothers me because I no longer have the precision of control. What could the problem be? Thank you