Rotiform Just Sent Us This...

No video

Rotiform Just Sent Us This...

Рет қаралды 159,276

Күн бұрын

The other day we checked our mailbox and to our surprise, our friends at Rotiform sent us a few packages that we weren't really expecting. The good news? It just happened to be a first look at their brand new Aerodisc. This is only a pre-production sample and the final product will hit the market in 3-4 weeks. Would you run the Aerodisc? Let us know down in the comment section below!
Need the hookup on a set of Rotiforms?
bit.ly/2O8WEMb
We have some big videos coming out soon, don't miss them!
Subscribe here► bit.ly/2x8fvNX
Need a new set of wheels? Check out our site!
www.fitmentind...
Check out more videos like this!
/ fitmentindustries

Пікірлер: 408

@FitmentIndustries 5 жыл бұрын

Don't click this link... bit.ly/2O8WEMb

@brandonpersaud 5 жыл бұрын

Fitment Industries are you sure it’s 3-4 weeks till release as of yday? Or did you get the letter/package late

@user-vs7sb9wg2r 5 жыл бұрын

I didn't

@tristanjohnston6403 5 жыл бұрын

hey I have a 1996 Grand Marquis and well I wanted to lower the car and put some rims on it and have it as a drift build I went to your website to see about some wheels and coilovers and y'all don't have nothing to lower it

@RaceboyYT 5 жыл бұрын

@@tristanjohnston6403 try adtr.net

@davidbakker-wester113 5 жыл бұрын

Ok i wont.

@SlightlyM3ntal 5 жыл бұрын

Almost right about the fans. They pull air OUT instead of in. It's to pull the stagnant hot air out from the brakes, while the ducting from the bumper brings in the cool air.

@CallMeMrX 5 жыл бұрын

From what I understood about the history of them, they were actually not as effective at keeping brakes cool as just not having them installed at all. Regardless, they look cool af, so who cares.

@tomgeboers2084 4 жыл бұрын

The main job was creating vacuum under the car to make ground effect. The regulations of FIA banned activ airodynamics so the manufacturers try to explain the item for cooling the brakes but that was only to try distract the FIA. It's never been used as a cooling item.

@Robby03 5 жыл бұрын

So its hubcaps for your rims

@StaticMedia 5 жыл бұрын

nope, centers for 3 piece wheels

@StaticMedia 5 жыл бұрын

or centers for rotiform monoblocks.

@markwarrenhickey 5 жыл бұрын

No it's hubcaps for rims

@4strokebloke528 5 жыл бұрын

No. They're more like turbofans

@lucagrundmann9469 5 жыл бұрын

4STROKEBLOKE they’re not. Alex even Said it. Pure cosmetic. It doesn’t have the fans of a turbofan. It’s literally hubcaps for your rims. Which is fine, it looks good

@karambit8300 5 жыл бұрын

You guys should do a video on the best looking factory oem wheels:)

@FitmentIndustries 5 жыл бұрын

Karambit US That’s not a bad idea! We’ll throw it on our idea list!

@maxxas5067 5 жыл бұрын

Oh that would be badass. No supercars though

@lehlogonolomatlala8776 5 жыл бұрын

Yeah that will be pretty badass

@karambit8300 5 жыл бұрын

Fitment Industries Ima throw my two cents and I’m gonna suggest BMWs M-Parallels off of the e38. My dream wheels for my e34^^

@andreyt1436 5 жыл бұрын

Volvo R rims are unique!!

@2Lamborghiniboyz 5 жыл бұрын

That Aerodisk is actually beautiful, just sitting back and thinking how it’ll look on my B5😍👏🏽

@vulkanschwarz3195 5 жыл бұрын

Hi mate ! Gonna take them for my b5 😉

@bigpat_4295 5 жыл бұрын

I dont think it would fit The Look of an a4

@DerJugoHaider 5 жыл бұрын

Take a look at JP Performance he has a B5 Sedan with a 5zyl. Swap. He have a Channel but its on german.

@ESPlover707 5 жыл бұрын

That’s what brought me here. Thought it would look sick on my s4. I’m thinking bout the LAS Rs though as they look a bit more rally without the aerodisc

@TheG60528XiJinPing 5 жыл бұрын

Would love these on an RMS c6

@cuhsp5336 5 жыл бұрын

Make a "THE TRUTH ABOUT FITMENT INDUSTRIES" video.

@Dvnnypaz 5 жыл бұрын

Genius.

@FitmentIndustries 5 жыл бұрын

It's on the way playboi!! We gotta hit 100k first! 🙌

@Sror3d 5 жыл бұрын

It would look super dope in carbon fiber!

@AnthonyBoettcher24 5 жыл бұрын

Love the look of these! I prefer these in white and obviously with branding :). Wish I they made these "plates" for factory rims too

@texasboyjmb 5 жыл бұрын

just waiting for Rotiform to do a forged wheel at 1k.

@MiguelRodriguez-nt5eq 3 жыл бұрын

Can't wait I have on order same set up in 19s going on my 2021 Model 3..🔥😎

@BESTNOODLEREVIEWS 5 жыл бұрын

Nice. Inspiration from older race cars, like old WRC cars, even the Mazda 787B was running a front aero disk wheel.

@marcstreiff6067 5 жыл бұрын

Yes .... For my C5 2005 allroad in full color ebony metallic black, that will rock ...

@tommyochoa5255 5 жыл бұрын

The e30 would kill with these versatile set up ! I need some !

@michaelstenhjem8086 5 жыл бұрын

I think these could good look pretty cool on a Subaru STi/WRX or Ford Fiesta/Focus tarmac rally build.

@mUnchaMaddNesS 5 жыл бұрын

Michael Stenhjem rather see actual OZ wheels on a tarmac rally car tbh, especially in the more appropriate sizes of 16/17s

@thedriverux 5 жыл бұрын

Yooooooo. I dig it. I've always wanted turbo fans. I like how they can switch up your wheels without unbolting them. It seems that the rally look is trending. I'd be 100% sold if they are functional for extracting heat from the brakes. I'd piece together a lightweight set for track days.

@tomgeboers2084 4 жыл бұрын

It's never been used for cooling purposes, the main purpose was creating vacuum under the car to become ground effect... Manufacturers pretending it was for cooling because FIA banned activ airodynamics so the manufacturers try to explain the item for cooling purposes but it was never used for that...

@michaelheskett3119 4 жыл бұрын

Are you stupid? The ENTIRE reason for turbofans was to pull hot air away from the brakes. They had the added benefit of providing extra downforce, but that wasn't the goal.

@michaelheskett3119 4 жыл бұрын

If only they were functional......

@felixf5211 5 жыл бұрын

I'm 55. This reminds me of many Turbo-style wheels, I think that's what they were called, that were common on German tuner cars in the late-80s. I think it looks cool, assuming the rest of the car can support it.

@Houstonszombiekid666 5 жыл бұрын

I dig it a lot. I'm sure they will do all kinds of designs for the turbo fan.

@justindmt7572 5 жыл бұрын

OMG. Best thing from Rotiform till now! Big thumb up!

@tycamp3251 5 жыл бұрын

I like the idea. Buildable 1pc wheel, different but i really like the turbo fan addition. If they're not super expensive and wanna change the look of your car, why not?

@everythingwithmj5310 5 жыл бұрын

You guys should review bad wheel trends like spinners😂

@littletickedoff2640 5 жыл бұрын

You guys are dope as HELLLLLLLLL respect to the man who started this channel

@andrewvrbanic4335 Жыл бұрын

That’s awesome 👏 as I seen on the site and thought it was a one piece rim. 🤙🏼 cheers for the vid. Time to get some

@donellis5005 5 жыл бұрын

Rotiform should just make a solid black rim with uniquely designed interchangeable faces...... he'll even make it so that you can design your own rim face and send specs to their machine shop for an additional cost that would be dope as fk

@DOHCside1 5 жыл бұрын

Don ellis they use to do this. You use to be able to just order faces and some of their designs are from people out side of the company but when MHT bought them that all stopped

@monolinkster 5 жыл бұрын

Those wheels looks AWESOME with the turbofans!

@therealderjett 5 жыл бұрын

Those would look badass on a classic BMW 2002 or a Mazda 323 GTX. I could see those on a MK1 or 2 Golf with a swapped VR6 in classic race trim. Even a 1st Gen Miata with those color matched would look sweet.

@alan_harake 5 жыл бұрын

I would love to see them do a design like the bbs turbofan. Flat face not concave with fins sticking out the side and the mesh design drawn on the face. This just looks too plain but I hope they don't just stop here

@weswatson311 5 жыл бұрын

D-LNG fans do this. Look him up on Insta.

@S_Kane 5 жыл бұрын

The cover gives a nice representation of the oz’s

@EYZSACK 5 жыл бұрын

I think I just fell in love with Rotiform

@randyjoseph462 5 жыл бұрын

I'd run these in a heartbeat on my plug in hybrid, just not in 19"

@LTLBproductions 5 жыл бұрын

Came back to look at these beauties

@Kev27RS 5 жыл бұрын

That ROTIFORM wheel has something about 90's BBS wheels... 🤔 ✌

@matejogrinec4111 5 жыл бұрын

Wheel becomes a centrifugal compressor. Air is sucked out from the brakes, not in... ;) Difference in airspeed cause air to "shoot out" in the outer diameter of the wheel. Check Zender turbo wheels.

@bzzt_jgtc 5 жыл бұрын

Matej Ogrinec modernized version was the wheels on the mclaren SLR which did the same job

@AHondaCivicEX 5 жыл бұрын

If that thing looks familiar to you, that means you've seen Ken Block's '13 Ford Fiesta gymkhana 6, but they have different color scheme

@lilandyle32546 5 жыл бұрын

The cover is Similar to the directional wheel CCV made from them as well.

@undofactory4000 5 жыл бұрын

They are.. beautiful, on the inside

@meddlok 5 жыл бұрын

Hub caps? Damn, really... would make more sense if they were just to protect your show car wheels between shows.

@willpeters3833 5 жыл бұрын

or between racing or something similar to both

@turtleb7170 4 жыл бұрын

Why cant they be used for what you use them for?

@austinrich6464 5 жыл бұрын

I'd run them on my A4 b6 but I have stock a6 BBS wheels. little much to go buying wheels to be able to run um though. But yes I believe it also helps with lowering the air pressure under the car as well, How much who knows.

@samwilson3921 5 жыл бұрын

German sombrero time!

@therealboofighter 5 жыл бұрын

Soooooo, they made fancy hub caps. Walmart was right all along.

@blurout 5 жыл бұрын

Fitment industries. The best place to get ur rims reviewed.

@maxxas5067 5 жыл бұрын

Scrive for success, that's the rotiform way.

@aldomandovani 3 жыл бұрын

I looove turbo fans, we can say I am a turbo fan fan jajaja

@Tinyymon420 5 жыл бұрын

As an old school rally fan, I knew exactly they were as you pulled them out 😍 time to get an old school Audi

@shawnjacobi8717 5 жыл бұрын

You could wrap it! And Make it look like blocks 1552

@takafumiarisawa70 5 жыл бұрын

I sold a pair of Speed Star Racing EX-C AERO for like 3 grand back in 010'. Kinda wishing I hand't though.

@misterbrittish 5 жыл бұрын

love it... i can c it helping withsnow too

@aliterro4067 5 жыл бұрын

this will look amazing on the e3o

@joenewberry5912 5 жыл бұрын

88-89 Chrysler conquest tsi & Mitsubishi starion esi-r had a SHP option that had those covers call AERO covers. Super rare

@Wiscompton608 5 жыл бұрын

I've been scouting out w124 wagons all day and a set of these would look nasty on one

@ajaymatto 5 жыл бұрын

It would be sick if you guys would test fit these wheels, you receive to show us, on employee cars so we know how they look installed

@toasty925 5 жыл бұрын

I think Volk/Rays and mugen back in the day had a similar design on one of their wheels.

@danieldasilva7112 5 жыл бұрын

It would be alot cooler if u could see more of the wheel

@dyricxbayting4419 4 жыл бұрын

Cool..i definitely will buy this turbo fan

@ingalook 5 жыл бұрын

It actually is potentially functional, if you want to keep the heat in your brakes (especially rear) these would reduced air flow

@tristianbilly001 5 жыл бұрын

Its actually pretty cool looking.

@tylerapple5054 5 жыл бұрын

Would you guys ever do something involving Fifteen 52? Wheel history, wheel spotlight, etc.?

@stickiefinger5571 5 жыл бұрын

Iconic BBS wheel

@erichroberts1768 5 жыл бұрын

a gift for that special hipster in your life

@FanatecSystem 3 жыл бұрын

Would the 19s fit on volvo s60r?

@jjchan6 5 жыл бұрын

Thank you so much for saying voila properly 👋🙏

@davidhaas3111 3 жыл бұрын

I usually really don’t like German or euro cars just because I’ve had good experiences with my old 98 Subaru Legacy and my new(ish) VW is a nightmare, but I love turbofans so much 😂. They just look too cool.

@briosaurusrex 5 жыл бұрын

I actually like the idea of turbo fans! Can’t wait to see the final product

@mrpas1495 5 жыл бұрын

They are produced only in 19 '. Can you try to see the result on 18 'RSE mags?

@tecdesigns8183 5 жыл бұрын

Looks a bit cheap to me but knowing roti they will be more than a set of wheels. All for show not a patch on bbs turbo fans they stick out a lot more

@wish22new 3 жыл бұрын

Please Help, i have an issue for Rotiform DTM 19” 5x112 installed at BMW X1 F48. After 2 days installations the center hub caps can’t opened by the plastic opener tools. The plastic tools is very week power to get any tension to get the cap opens. Please give me Any advice, how to get the cap open, i have frustrated at this entire day ☹️ Thanks in advance 🙏🏻

@59rip Жыл бұрын

Guys could you compare the plastic center lock with the metal one ? I guess the metal is longer to tight the whole thing together I wanna buy them for my LHR-M but not sure if they will fit

@JohnRobinson-nh7oj 3 жыл бұрын

The "Chaparral 2J" used fans to create a suction, forcing the 2J downward. Wouldn't it be nice if there was a quality wheel company (FI) that made a wheel that the spokes were functional fan blades that turned each wheel in to a fan and sucked the vehicle down? It must be a "not-so-great" idea or it would have been done by now. Maybe it would look cool-ish. I don't know. does anyone know why this isn't done?

@zephyrsspeedshop3708 Жыл бұрын

I need these for 17" wheels!

@solomedia8914 5 жыл бұрын

Dope wheels! I'm feeling the tubro fan

@LTLBproductions 5 жыл бұрын

This is exactly what I'm looking for.

@3MTurbo 5 жыл бұрын

Love this! Bbs rs livery on that fan looks fab!

@BerryFluffyHusky 5 жыл бұрын

You are right, that's what the fans are for

@bagassetyonugroho107 5 жыл бұрын

Yes please, i would run Aerodisc.

@TheBlacksun187 5 жыл бұрын

Y’all should go in depth with it and find the old school pictures of cars with it like the 935 and the group C cars

@BetoK1ng 5 жыл бұрын

If only...only!!! There was an E30 you could put those on....hmmmmm 🤔🤔🤔🤔

@Ckazz-mr1wq 5 жыл бұрын

😂 😂 😂 Only for audis💪💪💪

@soundbolt4776 4 жыл бұрын

@@Ckazz-mr1wq who said

@caffeineTX 5 жыл бұрын

I think its neat but original turbofans had actual blades in them to make them functional, these are just another step towards all show no go.

@khysor1832 5 жыл бұрын

Cant wait to get new rims for the 2020 subaru wrx

@retrophil8241 5 жыл бұрын

I think that's seriously cool 😎. 🤔But are they maybe like wheel trims, hub caps for alloys lol

@xREICHARDx 5 жыл бұрын

“Who would not use the tools given to them? That’s just stupid.” - The guy that throws away the ten mil out of his new E30

@jpwilliams5264 5 жыл бұрын

What rims are in the bottom right of the video?(on the wall)There ls a bronze and silver of the same rim. Thanks

@FitmentIndustries 5 жыл бұрын

Rohana RFX 11 which can be found here! ---> bit.ly/2xMBlGh

@chappyoatagaurd9771 5 жыл бұрын

hyper-mileage guys have been looking for these things for a wile. I had tracked down a company in UK that made these, but wanted 1500 for a set. now they just need to.maje them to retrofit to other wheels.

@shelbymurray69 6 ай бұрын

Going on my S550 GT front wheels

@Ocean240sx 5 жыл бұрын

Different color shades of See through plastic PLEASE😎

@jamesbarber4765 5 жыл бұрын

What is the wheel directly behind you with the red face and black lip?

@FitmentIndustries 5 жыл бұрын

ESR ES1-T

@petrol_garage 3 жыл бұрын

Are these include when u purchase the wheel?

@JEgkt 5 жыл бұрын

that is a great way to put things from the border...

@CNMTx-gc4zw 5 жыл бұрын

i think when its standing outside of the fenders it will really have a use

@williamaquino1218 5 жыл бұрын

I have a RSE set but in size 18 x 8.5 there is a kit for that set

@williamaquino1218 5 жыл бұрын

IS THERE SET FOR RSE 18 X 8.5?

@FitmentIndustries 5 жыл бұрын

Shoot us an email at shop@fitmenintdustries.com and we can take a look for you!

@whizthesk8r 5 жыл бұрын

Next set of wheels for the focus rotiform

@FitmentIndustries 5 жыл бұрын

We got you fam when your ready! bit.ly/2O8WEMb

@CrimxSun 2 жыл бұрын

Does the offset really matter. Can't find much about these except that they need to be 18 or 19 x 8.5

@afoolandhismoneychannel 5 жыл бұрын

I guess there's no one here old enough to remember these on the BBS wheels that Porsche used on their 935 (etc) race cars back in the 70s/80s. static1.squarespace.com/static/5764304bebbd1a9356def4e2/t/59d29613d2b8570dd3682e33/1506973228258/1977_Porsche_93520Baby1.jpg