What type of fitment do you have? Add it to our gallery for an IG shoutout

I have "stock" fitment

0:44 Tuck Fitment 3:11 Flush Fitment 5:22 Poke Fitment 7:40 Stance Fitment

Rocking that hella stock fitment

9:39 The rarest sight to ever be seen. If you get it you get it.

7:48 when you walk into the wrong classroom 😂😂

I like stance with little camber , but I'm in love with the flush meaty track look , definitely going for that with my rsx.

Flush all day

A barely poking fitment/almost flush but pokes a bit is just the best kind of fitment. Looks very aggressive and track ish like.

Flush looks hella clean and never hated on because it's just that good.

I could not stop looking at the background, 1 rim/wheel is missing

Subtle half inch poke on a muscle car looks absolutely amazing. It gives a beefy, muscle, badass look. I purposefully got spacers to give my Camaro just that little amount and have had numerous people notice without me pointing it out and say it gives the car wide and strong look. But it has to be subtle. Too much and you start getting into weird 'shouldn't this have a body lift and being going offroad?' pickup truck/jeep look.

Fender to lip or Tuck for me!

Idk why but the slanted wheels in a stanced fitment really bugs me. I don’t even really like slammed cars cause it seems super impractical and frustrating. But yet I’m still very intrigued by it 😂

my favourite is definitely flush.

Driveability goes out the window with stance fitment. Flush or slight poke all day long.

A good poke with a nice drop is the ultimate flush

I'm SO glad you made this video before I put my coilovers on.

I have a "Mistake Fitment" If you Happy and you Know it Clap your Hands...

i let my fenders roll themselves >:)

Interesting regarding your opinion on tucked fitment. I'm on coilovers, with my stock wheels. I dropped the car about 2.75" all around. On the same front, I did 15mm spacers in front and 20mm spacers in rear. I did this because, if I didn't, with my drop, I'd be hitting tires. I didn't need to roll fenders, and it fits well. The wheel itself stays under the fender line but the tire is partially hidden by the body work. I like the look of it anyways lol, it's practically flush, just a few millimeters off, and I never rub. So it looks good AND functions.

Just found your channel, and wanted to say thank you for making an objective video on this topic! Very interesting listening to someone in the actual industry talk about different styles of fitment, as there are A LOT of different opinions out there from "regular" car guys. Feels like there are a million different styles, you summed them up perfectly.

I'm currently running Silver Enkei RPF1 Wheels 18x8 +45 offset on my 2002 Subaru WRX Wagon, it's looks very nice but the thing too keep in mind is I have to run a thinner profile tire(225 r18) so in the end the ride is more harsh vs using a 17x8 wheel with more sidewall. Also using "Feal 442 coilovers" which allowed me to drop the height maybe 2 inches from stock, looks nice but is not slammed.

Watched this video because of the GTI thumbnail

I'm all about the flush look. It just looks mean, but it doesn't look like you're trying too hard. To each their own though.

2020 Mazda6, and got 20" aftermarket rims. The previous owner did a "Stretch" with little tires, I hit 1 pothole on the way home and dented the rim, and was like WTF?? Anyway I used fitment industries to choose my new "Flush" tire size, and make sure they would fit with no issues. I'm glad these guys are out here with this kind of info because the guy at the local tire shop had no clue what I was talking about!!!

i think you mean: 1. wrong 2. correct 3. less wrong 4. never

I have Poke on my Miata, with the camber provided by the coilovers, no more no less, and I love how it looks.

Flushhh. Looks and function. I’m hoping to upgrade to air so I can tuck when I air out but have a flush fitment when I air up. #goals

Running a flush Fitment but have done tucked and stance before. Flush is just nice for dailying and it still looks good

as a challenger owner i like "poke" fitment or agreesive stance. i wish there was a video that showcased how to go about getting negative or low offset that pokes out the fender but can launch HARD off the line too.

4:37 my sister has an accord just like that but it's stock. That accord looks so good!!

I went for poke fitment when i bought my wheels and got exactly what i wanted. If know what type of fitment for sure do your research because that helped me get the fitment i wanted

Stance fitment... is where it’s at for me... but I still have great ride quality and function... just a lot of work and trial by error , but when done right it absolutely worth it.

I cringe when i see a stanced car, the only thing i can think of is how fast the inside of the tires are gonna wear out

I had a flush fitment with my corvette wheels on my legacy, can’t lie I loved it

Ngl this channel is gonna get huge, love the content too

my friend's rsx has wheels that poke, but since the wheels are deep dish and pretty small, they look really good on it

The fact you guys sell fitments but also creat eentertaining content is so great.

Static and tucked is just the best

I think it goes: Aggressive Fitment Track Fitment Slammed Fitment Clean Fitment.

Cars hook down when launching. Take into consideration. I've seen rear bumpers, wheels/tires been destroyed at launch.

Ultimate fitment for me and what I do with my cars is what I call “lip poke”. I’m not a fan of monoblock wheels so my wheel choice is always a 2 or 3 piece wheel with a lip. Looking down the length of my cars from behind, you see the wheel lips just barely poking pasts the fender. If it’s my Audi B8 s5, when aired out the fender lip sits exactly between the tire (mild stretch) and the wheel lip. It’s all just a matter of preference. That’s the beauty of modifying/customizing cars...everyone has their own style

all about that tuck life... cos it was easy. Think it suits my S4 but ive seen s4's running fitment and it looks dope. love all of them as long as its done right

Always flush, always. There's NEVER a time, even in aesthetics in mind, that stance looks good. Last setup I had was [in my pic] 16x7, +42 wrapped in 205/40's. Next setup will be 15x6.5, +38. Rubber is in the air, might run offset sizing; F205/50 & R195/50.

Poke fitment on purpose here ... That aggressive bulldog stance is awesome in my eyes

Flush with a slight poke looks great

Ordered up a wheel/tire set up from you guys. Backorder but I can wait. Thanks again service is awesome.

I kinda thought that flush fitment only works on McPherson and double wishbone setups as the motion of the suspension travel arc. With some suspension like torsion beam, flush will always scrape the fenders. Just a thought though. Unsure if its true or not

Lol my 370z currently has monster truck fitment

I am after the Flush look thanks so much big respect!

Poke is becomming common on driftcars due to widened track on the front to clear increased steering angle. i had almost an inch of poke on my m3 due to wisefab making my trackwith 16cm wider than stock

Style 1 & 2 are in general the better and cleanest looking ones! 👍

Lol I’m static with tucked fitment because it looks nice not because I messed up. 🤷🏻‍♂️

2 videos in one day for the third day in a row . u guys not tired

Tucked with alot of negative camber is my favorite type of stance :)

Love your channel. Learning and/or confirming things for me. Thank you for your vids. I appreciate and seek an aerodynamic fitment / flush fitment most. I would guess there can be a flush and stance fitment combined so to speak to fully achieve this depending on the shape of the car's body - fenders, side skirts, quarter panels.

love poke fitment. It has a muscular stance and make the car broader than normal

Dope shot of the freight graff in there!

I’m from GB and having a Chanel based in Appleton is really cool because you mention somewhere around here and I’m like, hey I love right by there

ayyy here before 100 views, this channel is a whole mood

Stance is the most work because you have to keep attaching all of the pieces that fall off the car

This info is spot on, great job on bringing this information as clear as possible. I have had all 4 😂... only 3 now...

flush just looks so clean

Hey man I drive a FWD MK4 Jetta an my poke wasnt a mistake. The only reason my fronts donts poke is cuz of rubbing issues, otherwise they'd be poking too. It gives your car that brolic, mad pumped up look. I think only NYC people will get what I mean lol

7:47 guy in back: "did someone say 'hella flush'?"

Poke looks so good on “boxy” cars such as the 2000 Audi s4

I had no knowledge about fitment, now I do, and you have a new subscriber, thank you!

Btw im flush with the oem 17s and spacers. For now. 😀

Hahaha, Seeing the poke fitment on the new GT350 (15-18) Is what got me interested in it to begin with. I was never into muscle cars growing up (I was one of those JDM kids) but falling in love with the New mustangs and them being more then 'MUSCLE CARR, FK YEAHHH!!" Iv been actually more interested in doing poke fitment intentionally. hehee xD

I have a 05 es330 and I jus went from stock 17’s to Mas Italy 7spoke 18’s and it definitely gave me the poke fitment look rubs a lil bit in the back when I hit a dip but nothing too crazy. Definitely gonna roll my fenders in the next week or so

I have a caddy with 17x6.5 215/50/17 I plan on putting air suspension and tucking the wheels up the fender wells. It used to have 16x7 225/65/16

Personally i love love the poke looks so much!! I also love the flush fitment, and tucked looks cool aswell i just wouldn’t run that setup on my car.

Older cars with poke fitment look mint af.

I like how you own up to your receding hair line.

Running poked 9.5s square on my 13’ Genny Coupe. PokeGang.

Im gonna try and lower my car for the first time. It's a lexus is300. Besides the coilovers, is their anything else i should consider upgrading? Like control arms, end links, tie rods, bushings, and sway bar? Not trying to roll or have to pull fenders so not going too low. Just want a smooth ride.

I have shitment 😂

Fender to lip!!! 😍😍😍

@boostedboiz just got that little fender roll clip in there

I spy boosted boyz!!!

half inch of poke MK6 GTI

Haha peekaboo at 07:48 😂 Awesome video thanks

I was fender to lip until my fenders started getting clapped. Switched to tucking and now we’re lit

Flush fit 😎 all day errday

I like way flush or just a baby bit of cheeky poke looks. However, my car is a 1998 Nissan Altima and it will not look sexy no matter how much money and effort I put into wheel fitment. So leaving room for a 747 to take off and land keeps my shit functional as fuck.

5:25 I love this freaking look.

When you were talking about the poke figment it reminded me of when I was in high school and all the Honda guys were sticking wide tires on the back wheels... ya you read that right

You left out functional fitment 🤔😀

I got that stock mustang super tucked fitment 👌.......😢

“A little bit of poke never hurt anybody” 😂

poke on bugeyes is great

The background music is permanently hip-hoppish all the time. Hey Alex, can you do a Mega Death edition episode? Lol Alex do it!

Running poke but when you drive a lifted Tacoma it's pretty acceptable

4:58 totally looks like he munched the curb. Probably dipped in that drain but still made my heart drop

"A lil bit of poke ain't never hurt nobody" 😂💀

Poke stance is hands down my favorite! comes with its compromises, but I love it on my 2013 Sonata!

I never understood "stance." Evey time I see a stanced car, I don't see it as being fast but actually rather slow and finicky. And then my attention is drawn elsewhere...

Flush fitment for my gen coupe!

It's all about a motorsport fitment. Function and Fashion!! Usually a little more rubber and not always as low as possible.