How I made this Bladeless Cybertool M

Рет қаралды 258,778

2 жыл бұрын

Would this knife pass through airport security? Let me know what you think in the comments. Like I said in the video, it will really come down to the TSA agent who is inspecting you. I've seen TSA take fingernail clippers away from an elderly woman before, so, really nobody can say for sure if it will pass. LOL
I hope you all enjoyed this build video and please share your thoughts.
Thank you everybody for a great 2021 and let's have an even better 2022!!!
You can find more of my work on my website and information on how to order a custom Swiss Army Knife:
f2scustoms.com/
My Instagram:
/ fit2survive_
Amazon links to most of what I used to make these knives:
Victorinox Cybertool M: amzn.to/3pK65Uy
Brass rods for reassembly: amzn.to/3eRsYid
Ferric Chloride: amzn.to/31dfE4H
G10 for liners: amzn.to/3xEKK0C
Scales were found on Aliexpress. I do not have a link for them.
Music from: www.purple-planet.com/

Пікірлер: 680

@A-G-F- 2 жыл бұрын

Finally, a DIY project that dosent need 3D printing, Machining or a furnace! Nowadays everyone seems to have tools for that, except me :(

@FittoSurvive 2 жыл бұрын

You and me both... 🤣 Although I'd love to have them.

@Uns_Maps_8 5 ай бұрын

Neither do I

@dagger341 2 жыл бұрын

As someone that wanted a bladeless multitool, and ended up with a modded cybertool lite, I will share my own research. To pass TSA guidelines there are four important things to note. First of all, they might try to stick the "No swiss army knife" rule on you, because of the cross Design on the front. However, TSA guidelines clearly state that you CAN have a multitool in your bag, as long as it doesn't have a knife blade. You will probably want to make a sheath for it to rest inside of to be extra compliant. Second is the scissors. TSA states that you are allowed to have scissors if they are less than four (4) inches to the fulcrum. Since this is a small set of scissors, it should be fine regardless of which fulcrum the agent chooses to try to use. The third is the most surprising. The bit driver will fall under the "collapsible tool" rule, and must be less than seven (7) inches long when fully extended and assembled. The bit driver should just barely squeak by this. The last one doesn't apply to your build, but is good to know. According to TAS guidelines, corkscrews are permitted on the plane, as long as they are not attached to a knife blade. Hope that is helpful!

@FittoSurvive 2 жыл бұрын

Wow!! That is VERY helpful actually! Thank you for all of that information.

@nobodxy 2 жыл бұрын

The problem i see is that it looks so cool that the agent might want it for themselves, thus trying to take it from you. I'd love an update once you actually went thru the airport with it

@FittoSurvive 2 жыл бұрын

@@nobodxy Yeah, that would definitely be an extra difficulty. I built this knife for somebody else. If he flies with it, I will update if he flies with it.

@korgan7779 2 жыл бұрын

Yes, thank you very much! All info is helpful. Sadly I still feel that it will come down to the agent and how they are feeling that day and if you have the time to whip out the document and argue your point.

@dagger341 2 жыл бұрын

@@korgan7779 if you want to fly with a tool like this, you will be served well by having a paper printout of the regulations, so that if there is a "Problem" you can show that you are in compliance.

@SuperSkylighter 2 жыл бұрын

It is difficult to claim something is TSA compliant…because I’ve had a bladeless leatherman style confiscated on an international flight because of the scissors..and ive flown enough to know that it’s really up to what mood the agent is..They can pretty much say anything is non compliant if they feel it is.

@FittoSurvive 2 жыл бұрын

Yeah, that really does make it risky. It'd be so much easier if there was a set rule that tools had to comply to without the judgment of a grumpy TSA agent.

@quimblyjones9767 Жыл бұрын

@@MPD90 that's not gonna happen hahaah. They just move you on, they took the Leatherman Style because they wanted it for themselves. Just put it in your main luggage or post it over to where you are going

@G58 Жыл бұрын

@@MPD90 The TSA IS the mistake.

@NCrdwlf Жыл бұрын

I’m a flight attendant and have taken a few bladeless tools through since 911, one for over a year of getting spot checked , only to have it removed by a tsa agent that probably wanted it for himself. While in uniform I can’t really argue my point as it gets me in trouble , I just have to roll with it . Multi tools are useful for us as we have stuff in the galleys that need tightening sometimes and all of the hotel windows are often screwed shut, posing an evacuation risk . It really is up to agents at tsa and if they want your stuff. There is no guideline of any sort just a no blade rule. Small scissors are allowed , and then you have the 12 inch knitting needles that are allowed so none of it makes any sense at all. I’m currently carrying a Gerber shard and a cheap set of Amazon mini pliers . I’ve had one shard confiscated, after hanging in there for 6 months .

@babatundesoyeyejr.1120 9 ай бұрын

Most TSA agents who take bladeless tools just want it for themselves. Just put it in your main luggage so the fuckers can't steal it

@allanatwick1606 2 жыл бұрын

I only came across this channel yesterday and I must say I'm impressed, nice easy to watch videos, no useless time wasting drivel (some channels have verbal diarrhoea) Plenty of info and links but above all, the finished articles are stunning. Thank you for sharing it with us Stay safe 👍

@FittoSurvive 2 жыл бұрын

Wow! Thanks. That means a lot to me. Glad that you enjoyed my work!

@wgkincheloe2458 5 ай бұрын

So awesome. Thank you for sharing! These are some of the dopest videos I've found.

@FittoSurvive 5 ай бұрын

Thanks for watching! Glad to hear that!

@dadandme 2 жыл бұрын

I'm not sure the black coat will last long but it looks freaking awesome!!! I have and love Swiss Army knives for more than 30 years but I didn't know that they can be customized. You did a terrific job 👌

@FittoSurvive 2 жыл бұрын

The acid etched finish can be scuffed off over time with use. Thank you! 👍🏻

@RedFlip7H 2 жыл бұрын

FINALLY A STEP-BY-STEP! Love your work man, this was exactly the video we were waiting for.

@FittoSurvive 2 жыл бұрын

Glad that you enjoyed it!

@branikkkk 5 ай бұрын

Damn, I love watching you work. It looks so effortless. Wonderful job!

@FittoSurvive 4 ай бұрын

Thank you for watching!

@antonsimanov 2 жыл бұрын

Fantastic build, love to see the process this way and get your comments in. I’m serious when I say this, you’ve got the best approach and informational videos when it comes to modding SAKs, this is the kind of stuff I looked for when I started out. Keep it going, you rock man!

@FittoSurvive 2 жыл бұрын

Thanks a lot! Glad that you enjoyed it! Comments like these really make it worth the 3+ hours of video editing that goes into a video like this.

@velocajigas 2 жыл бұрын

Astonishing Bill looks amazing something I won't mind having on my EDC kit. You're right about the scissors TSA won't let it pass nothing that has an edge on it.

@FittoSurvive 2 жыл бұрын

Thank you! Hmm... That's what I thought.

@Emily_M81 2 жыл бұрын

holy crap. that's beautiful and it would be a shame if the TSA confiscated it :O I had a security agent in Australia confiscate a Leatherman Style PS which was designed from Leatherman to be TSA-friendly. First he pointed at the file and said it had a knife, I told him it was a file and he stared at me with a dull look in his eyes and then just flatly said I couldn't have it. It never even occurred to me that these things can be so highly customized, excellent work!

@FittoSurvive 2 жыл бұрын

Thanks a lot! Yeah, sometimes TSA can just be stubborn and difficult.

@doubledrats235 Жыл бұрын

I love that knife! You did an incredible job of designing and building it. And blue is my favorite color.

@FittoSurvive Жыл бұрын

Thank you! I appreciate it! 👍🏻👍🏻😁

@JCreole 2 ай бұрын

I wouldn’t take that chance of being TSA approved….Wouldn’t want to loose the nice build.

@FittoSurvive 2 ай бұрын

Yeah, there's always a risk.

@bobfugazy4916 9 ай бұрын

Nice work, I love the blue separators. Thanks for sharing.

@FittoSurvive 9 ай бұрын

Thanks for watching!

@westonknight7474 2 жыл бұрын

Very-very nice job on this project sir. I've been carrying a Leatherman Surge in a Deadskin Leather Sheath for many years now, and as a truck driver, I pretty much use this well weathered tool daily for this and that...for me it's priceless. I don't know, but the awl may give you problems with some TSA individuals. I wish you the best of luck in your travel adventures sir. Be well.

@FittoSurvive 2 жыл бұрын

Thank you! My EDC is a Leatherman Charge Ti. It also gets lots of love. I appreciate it!

@m.d.8769 2 жыл бұрын

Good video quality and perfect timing.

@FittoSurvive 2 жыл бұрын

Thank you!

@RidingKG 2 жыл бұрын

Great job. Thanks for taking the time to show us so many steps youu take. A lot of work goes into every knife and even more going into the video work, very time consuming. Again, really good video.

@FittoSurvive 2 жыл бұрын

Thank you! Yes, it really does take quite a while to make both the knife and video. 👍🏻

@brianproffitt7263 2 жыл бұрын

I subscribed instantly your builds are so sick, never seen someone build them like you 🔥🔥🔥

@FittoSurvive 2 жыл бұрын

Thank you! I appreciate it. 👍🏻👍🏻

@user-zv6fz8zr9y 2 жыл бұрын

great video, thank you, happy new year, I watch with pleasure!!!

@FittoSurvive 2 жыл бұрын

Thank you! Happy New Year!

@jobrimar8291 2 жыл бұрын

Oh man! That thing looks fantastic, I would have never thought about going for the blue g10 but every build you do with them looks excellent. HNY.

@FittoSurvive 2 жыл бұрын

Thank you! I like how the blue G10 turns out too. 👍🏻👍🏻

@rabadabadoo491 2 жыл бұрын

Even non locking knives aren't allowed in some places in the UK, like schools. So a bladeless tool could be very handy. Top work as usual

@FittoSurvive 2 жыл бұрын

Yeah, I think you're not supposed to carry a knife in school in the Stat nowadays either. Thank you!!

@zainshaikh527 2 жыл бұрын

Meanwhile my local community college in North Texas, in a city with pretty much all out of state locals from all over, declared that they are cool with straight up short swords haha. It's so cool to be here minus us being famous for harboring the underground trumptards or renoun lol

@FittoSurvive 2 жыл бұрын

@@zainshaikh527 Texas is the best state! I may be partial though. 😝

@Igni.. 2 жыл бұрын

I could not live in UK. In my country a have full tang knife on the side of my bag and no one had a problem. I go to the school, restaurant etc.

@FittoSurvive 2 жыл бұрын

@@Igni.. Yeah, the UK has some crazy knife laws. I'd hate it.

@MarkEvansFromYorkshire 2 жыл бұрын

Great video! Really enjoyed that

@FittoSurvive 2 жыл бұрын

Thanks! 👍🏻👍🏻👍🏻

@juancarlosmoralesrguez834 2 жыл бұрын

It's amazing the way you work and "how easy" you make things look. Congratulations and what a nice job. Waiting on how that WAVT is looking!!! Greetings from Mexico

@FittoSurvive 2 жыл бұрын

Thank you! I appreciate that. I need to get back to the XAVT project. I have been swamped with orders and have abandoned it... But I will get it done!

@emesser7087 2 жыл бұрын

Very very well made video and project 🙂👌👌👌 thank you very much for sharing. This one is really an awesome one to show people how it's done. Excellent work 🙂👌👍

@FittoSurvive 2 жыл бұрын

Thanks a lot! I am glad that you enjoyed the video! 👍🏻👍🏻👍🏻😎🔥

@LE-6920 2 жыл бұрын

It's a coolest idea and job, which I saw at the past few years!!! I even just couldn't imagine that it possibly to make such incredibly masterpiece out of a such nondescript swiss... To say amazing - to say nothing...

@FittoSurvive 2 жыл бұрын

Thank you! I greatly appreciate that! 👍🏻👍🏻👍🏻

@syahrilsamsuddin 2 жыл бұрын

Fantastic works as always..👍🏼👍🏼

@FittoSurvive 2 жыл бұрын

Thank you!

@ELaster1 2 жыл бұрын

Amazing work and amazing product. Favorite video and build of yours so far 😁😁 Happy new year from Israel

@FittoSurvive 2 жыл бұрын

Thank you! Glad that you enjoyed it! Happy New Year!

@vahearutiunian8982 2 жыл бұрын

It’s looks awesome!!! Thanks for the content.

@FittoSurvive 2 жыл бұрын

Thank you! Glad you enjoyed.

@Chris-sie 2 жыл бұрын

You are a real Artist! So beautiful!!!! 🥰

@FittoSurvive 2 жыл бұрын

Thank you very much!!

@karinamcfall3383 2 жыл бұрын

Great work. I really like the set up. 🌸

@FittoSurvive 2 жыл бұрын

Thank you! 😉

@srp_rtl 2 жыл бұрын

Amazing work dude

@FittoSurvive 2 жыл бұрын

Thank you!

@reyesngerardo 2 жыл бұрын

I’m not sure about tsa but this would definitely come in handy when visiting countries with strict knife laws. Cool build btw loved the textured tools.

@FittoSurvive 2 жыл бұрын

Yeah, a couple of other people have mentioned that. I didn't think about it at first, but you are right. It would be a good build for places like that.

@SurvivalSavvvy 2 жыл бұрын

I am going to try this on some cheap knives to practice before I do my expensive thank you for such a great tutorial

@FittoSurvive 2 жыл бұрын

Awesome! You are welcome.

@ezryderx47 11 ай бұрын

Amazing job! Thanks for the video.

@FittoSurvive 10 ай бұрын

Thanks for watching!

@ryewhiskeyfan5946 2 жыл бұрын

That turned out beautifully. Well done. New subscriber.

@FittoSurvive 2 жыл бұрын

Thank you for the compliment and sub!

@The_Master_Sergeants_FeedBack 2 жыл бұрын

That is Beautiful!

@FittoSurvive 2 жыл бұрын

Thank you!

@1ctf749 2 жыл бұрын

great video! i wish more companies made tsa approved tools for travel and stuff.

@FittoSurvive 2 жыл бұрын

I totally agree!

@bigdaddychud 2 жыл бұрын

TSA would take it as it is very cool. That is beautiful work.

@FittoSurvive 2 жыл бұрын

Probably right. LOL Thanks.

@drathmor1401 2 жыл бұрын

beautiful work brother

@FittoSurvive 2 жыл бұрын

Thanks a lot!

@augustolpr9567 2 жыл бұрын

I loved the finish of the acid dip

@FittoSurvive 2 жыл бұрын

Thanks.

@zacszuberski 2 жыл бұрын

Good job man!

@FittoSurvive 2 жыл бұрын

Thanks!

@jeremiahbrady5296 2 жыл бұрын

Been working great for me, got everything I need in 1 place

@FittoSurvive 2 жыл бұрын

Awesome! I was about to send you a link. Glad to hear that it is working great for you.

@DanMstylesEnt 2 жыл бұрын

This is amazing, would love to try this someday

@FittoSurvive 2 жыл бұрын

Thanks. Should give it a try. 👍🏻👍🏻

@Deathonater 3 ай бұрын

Beautiful mod. I'd love to do something similar with a SwissChamp XLT, but just replace the blades with non-blade tools in order to keep the tools on the opposite side like the corkscrew.

@alaub1990 2 жыл бұрын

That turned out fantastic

@FittoSurvive 2 жыл бұрын

Thank you!

@ericabull8755 2 жыл бұрын

I love the new change ! 😎

@FittoSurvive 2 жыл бұрын

That's great! 👍🏻👍🏻

@Andrew-wb9kg Жыл бұрын

Amazing work, compliments to the maker

@FittoSurvive Жыл бұрын

😅 Thank you.

@Andrew-wb9kg Жыл бұрын

@Fit to Survive and I love the idea of brasswash, didn't know it had such a nice effect. I used small rocks before. Fantastic.

@FittoSurvive Жыл бұрын

@@Andrew-wb9kg Yeah, it turns out nicely.

@edgaraquino2324 2 жыл бұрын

Hello, another great build! I am again amazed at your tech and artistry skills...I like the color combination and can see the effort and care needed to get the tools and the other elements of the build to look the way they do...beautiful...I hate to sound uncharitable, but I believe the tool will be "nicked" because it looks so good and the scissors will be the excuse...Personally though, I don't see any reason why there would be a problem...Many thanks to you for all your efforts during 2021, I have enjoyed your videos; seeing you make practical tools with an esthetic bent to them...I am pleased to see your growth during this year, much deserved...May you, your wife and yours have a happy, prosperous New Year with many blessings and continued success!

@FittoSurvive 2 жыл бұрын

Wow! Thanks a lot! Really made my day! You do have a really good point. 🤔 TSA may take this just because it looks too good. 🤣🤣🤣 Happy New Year! Thank you for all of your support!

@domagojstamac6019 2 жыл бұрын

Beautiful job man, it's real art.Greetings from Croatia.

@FittoSurvive 2 жыл бұрын

Thanks a lot! How cool!

@AlphaMachina 2 жыл бұрын

That's incredible.

@FittoSurvive 2 жыл бұрын

Thank you!

@jsollien127 2 жыл бұрын

It’s so nice it will make TSAs eyes water!

@FittoSurvive 2 жыл бұрын

😊 Thanks!

@stephenmackey4571 2 жыл бұрын

Excellent work, thanks.

@FittoSurvive 2 жыл бұрын

Thank you!

@akashmehta1637 2 жыл бұрын

Oh , that looks really great . I wish you sale this one . I would be happy to buy it . lol But seriously , you sh sale these more . good luck

@FittoSurvive 2 жыл бұрын

I do sell these. I make them to custom order. But my waiting list is about 36 weeks. Check out my website for information. www.f2scustoms.com

@ChoirAnthony 2 жыл бұрын

That's way too cool!

@FittoSurvive 2 жыл бұрын

Thanks!

@manecobeirao 3 ай бұрын

Parabéns por sua sensibilidade criativa que resulta em "obras de arte " ! ( Brazil )

@FittoSurvive 3 ай бұрын

Thank you very much! 👍🏻👍🏻

@chasekemp4982 Жыл бұрын

Amazing. I’d remove the pliers and swap out the bottle open and can opener for a Spyderco blade that can be opened with just my right hand. And of course add a pocket clip on the scissors side. I would use that thing multiple times daily.

@FittoSurvive Жыл бұрын

Thanks. 👍🏻 Sounds like a good toolset.

@rrrufruf 2 жыл бұрын

Beautifully done. Great job.

@FittoSurvive 2 жыл бұрын

Thank you!

@TheEnd-op2bv 2 жыл бұрын

Красный пластик есть?

@FittoSurvive 2 жыл бұрын

@@TheEnd-op2bv Стандартные накладки? Есть.

@blaiooo 2 жыл бұрын

Excelente gob! Happy New year! 😁

@FittoSurvive 2 жыл бұрын

Thank you! Happy new year!

@my_everyday_carry 2 жыл бұрын

Wow - awesome video - thanks!

@FittoSurvive 2 жыл бұрын

😊 You are welcome! Glad you liked it

@schrauberigne 2 жыл бұрын

So Awesome… I‘m in love with that cool Cyber Tool🤩🤩🤩

@FittoSurvive 2 жыл бұрын

Thanks you! I am thrilled to hear that.

@joshuacantu101 15 күн бұрын

Nice job❤

@josephlicata4304 2 жыл бұрын

Very nice job! Thank you

@FittoSurvive 2 жыл бұрын

Thank! Glad that you enjoyed!

@zeth997 2 жыл бұрын

Great work! Beautyful piece of art. THX!

@FittoSurvive 2 жыл бұрын

Thank you!!

@zeth997 2 жыл бұрын

@@FittoSurvive Greetings from Poland :)

@FittoSurvive 2 жыл бұрын

@@zeth997 Awesome!

@rovisberistain9151 2 жыл бұрын

what a great video tks for sharing...

@FittoSurvive 2 жыл бұрын

Thank you! Glad that you enjoyed!

@satyaprakash03133 11 ай бұрын

It's all wonderful!🎉

@FittoSurvive 10 ай бұрын

Thank you! 😊

@paulhanley5811 2 жыл бұрын

nice work of art , mad skills

@FittoSurvive 2 жыл бұрын

Thank you! I appreciate that.

@UnstoppableTramp 2 жыл бұрын

Please don't chance that beauty with the TSA clowns bro!! Great work. I would be very proud of that

@FittoSurvive 2 жыл бұрын

Yeah, it would be really sad to lose.

@bh9262 2 жыл бұрын

I'm a new subscriber. I'm glad I found your channel. I personally wouldn't try to take it on the plane only because if they didn't allow it, they might confiscate it unless you have a way to mail it back home? It may make the first leg, but the return flight may get it captured. I lost a white handled Swiss climber at the airport because I forgot I had it in my backpack. The TSA kept it. I forgot to put it back in the checked bag.

@FittoSurvive 2 жыл бұрын

Hey! Thank you for subscribing! The person I made this knife for said that he plans to fly with it. He's a flight medic and said that he flies often. But definitely it is a risk every time. TSA's website gives rules for flying with a multitool, but say that the final decision is up to the TSA agent inspecting you.

@GimliLordOfGlitteringCaves 2 жыл бұрын

This is a work of art

@FittoSurvive 2 жыл бұрын

Thank you!

@Bluespade115 2 жыл бұрын

Great work! I need to have one made for my edc.

@FittoSurvive 2 жыл бұрын

Thank you! I appreciate it!

@eln77 2 жыл бұрын

Amazing customs!

@FittoSurvive 2 жыл бұрын

Thank you!

@archievthapa3593 2 жыл бұрын

Spectacular !!!

@FittoSurvive 2 жыл бұрын

Thank you!

@michaelveloso 2 жыл бұрын

Nice Job, keep it up, very nice to watch

@FittoSurvive 2 жыл бұрын

Thank you! Glad that you enjoyed it.

@michaelveloso 2 жыл бұрын

Sorry to say, was not a sub, I'm lazzy, even after I have watched a good hand full of your videos. But I am now. Was wondering, I this your job? To make custom pocket knifes or just a hobby?

@FittoSurvive 2 жыл бұрын

@@michaelveloso Well, I am glad that you have now subscribed! Thanks! This started out just as a hobby, but now it has escalated to being more or less my full-time job.

@blackwater3084 2 жыл бұрын

I want it ! love it !

@FittoSurvive 2 жыл бұрын

👍🏻🤣🤣🤣

@atongs_edc 2 жыл бұрын

Hey what’s up bro! Excellent build as always. Love how you intricately make these mods, very nice! However, like what we have discussed on IG, if the TSA agent is an IG or KZfaq follower of yours, it might not. ✌🏼😂 Happy new year bro! 🇵🇭 🥂

@FittoSurvive 2 жыл бұрын

Hey! Thank you! Yeah for sure. 😂😂😂😂 Happy new year!!

@martinchobouchard 9 ай бұрын

Love it!

@FittoSurvive 9 ай бұрын

Thanks!!

@maxxserpica5096 Жыл бұрын

amazing video kinda funny im working on almost the complete opposite for myself. cybertool with just blades screw driver and corkscrew. i bent the crap out of my liners thougfh so i think i need to get some G10

@FittoSurvive Жыл бұрын

Thanks. I'm sure that will. Be an interesting build. 👍🏻😁

@nivlekahm 2 жыл бұрын

Cool like always

@FittoSurvive 2 жыл бұрын

Thank you!!!

@gabrielrajotte2642 2 жыл бұрын

Wow amazing build! this video will be very useful for my first custom, i will start easy i just want to remove the saw on my huntsman and acid & brass wash. All that remains is to receive the titanium scales

@FittoSurvive 2 жыл бұрын

Awesome! I am glad that you found this video useful! Good luck on your project!

@warriorsage591 2 жыл бұрын

Brilliant 👏

@FittoSurvive 2 жыл бұрын

Thank you!

@meki8216 9 ай бұрын

Love it! How much would this cost to buy but keeping the original finish and removing the awl ? Can’t risk being caught with a “weapon” here in Aus.

@heroglif 2 жыл бұрын

Cool! I envy!

@FittoSurvive 2 жыл бұрын

Thanks.

@kaunghtetoo1440 2 жыл бұрын

when doing another project, should try with watch luminous powder mixture, epoxy for filling the plus sign hole and that will be awesome.. sorry for my english..

@FittoSurvive 2 жыл бұрын

That is a really cool idea! 👍🏻 I should give that a try.

@jessepeckable Жыл бұрын

This video is awesome! Since I always have a pocket knife with me, I feel like having a multi tool with a blade is a bit redundant. Why not get rid of the blade and add more tools? So clever.

@FittoSurvive Жыл бұрын

Thank you! Glad that you understood the concept. ☺️👍🏻

@hajihunterr7662 2 жыл бұрын

Super cool

@FittoSurvive 2 жыл бұрын

Thank you!

@user-yf5iq6bu2u 2 ай бұрын

Как всегда высший пилотаж 🔥

@MrFroggy29 2 жыл бұрын

Superbe résultats, félicitations !

@FittoSurvive 2 жыл бұрын

Thank you.

@yuriysulzhenko9125 2 жыл бұрын

Nice watch (Garmin Instinct Solar) 👍

@FittoSurvive 2 жыл бұрын

Thanks! Yes, you are correct. 👍🏻👍🏻

@Clemson-rc2yq 2 жыл бұрын

As a guy who carries a bench made I need a good tool but don’t want a knife this is Genius

@FittoSurvive 2 жыл бұрын

Awesome! Thanks. 👍🏻👍🏻

@Mr_lahDdah_Gunner_Graham 2 жыл бұрын

Great work, love the acid etching ...but.... what is the model of the little knife with the forked pry-bar you use to get it apart .. Gotta get one of those ! Its black and has some silver white writing on it !

@FittoSurvive 2 жыл бұрын

Thank you! That small knife is a Victorinox Caddy.

@mustafamuratkucuk2094 2 жыл бұрын

I like it!

@FittoSurvive 2 жыл бұрын

Awesome! Glad to hear that.

@alexleon619 2 жыл бұрын

Я восхищён! Ювелирная работа ! Уважение !

@FittoSurvive 2 жыл бұрын

Спасибо!! 👍🏻😎

@Forward-Observer 2 жыл бұрын

So rad!

@FittoSurvive 2 жыл бұрын

Thank you!!

@aarde7036 Жыл бұрын

Amazing...

@FittoSurvive Жыл бұрын

Thanks a lot 😊

@RogierYou 2 жыл бұрын

I would love to have one with a YuBikey and possible usb flash storage build inn. Also an IPhone sim extractor pin

@FittoSurvive 2 жыл бұрын

The Yubikey and USB drive would be rough to add. But the sim extractor pin can be added.

@NikoHeijboer Жыл бұрын

Very cool

@FittoSurvive Жыл бұрын

Thank you!

@msreiser 2 жыл бұрын

Can't get enough of your build videos. This one is by far my favorite as you go into the process in more detail. Have you been able to source the 2.2mm brass rods other than from Europe or via Aliexpress? If not, do you drill out the 2.2mm pin holes (for the corkscrew, etc) to fit 2.5mm pins?

@FittoSurvive 2 жыл бұрын

Hey! Glad to hear that! I have not been able to source the 2.2 mm brass rods from anywhere except for China. I have never drilled out the middle tools to 2.5.

@gregorhi2 2 жыл бұрын

I usually have my cybertool with me while travelling if I'm checking in luggage. We visited Legoland a few years ago and I wasn't allowed to bring it into the park because...of the screwdriver parts. The blades were not a problem 🙂

@FittoSurvive 2 жыл бұрын

What??? Because of the screwdriver? 🤣 That's crazy. They must have thought that you'd take something apart...