Fix Briggs All Plastic Recoil Pull Starter Assembly

Рет қаралды 108,009

5 жыл бұрын

How to reinstall and rewind a clock spring in one of these newer all plastic recoil starters that briggs makes.
If you need to replace an individual part you can’t they don’t make them available.
Recoil ASSY
amzn.to/3i8tTKT
Starter Cup
amzn.to/3AxW0xj
I participate in the amazon affiliate program.
• New Style Briggs Recoi...
Disclaimer:
Due to factors beyond the control of Hank's Garage, I cannot guarantee against improper use or unauthorized modifications of this information. Hank's Garage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Hank's Garage recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Hank's Garage, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Hank's Garage.

Пікірлер: 119

@cassiefinnerty8426 3 жыл бұрын

Thank you for this video. As a single mum who some how broke the pully on the mower yesterday I was shocked to find my exact mower in KZfaq with a fantastic video to replace the cord, super easy instructions to follow so thank you thank you saved me the cost of labour to get it fixed!

@chadstellwagen3460

Thank you!!! My father has dementia and decided to work on the lawn mower. I could not figure out the coil mechanism

@simonbriscoe5968

Graet video I broke the cord on my snowblower and took apart the coil to try and fix it and opened up a can of worms, This video set me on the right path and got it working aging. Much appreciated.

@TeranRealtor Күн бұрын

I fix almost everything based upon youtube videos. This was great! Exactly what I needed today!

@bigblockford3059

Thanks dude it was super simple. I figured it out because I thought you had to crank the spring then get it on then I found your video it was simplistic mower fires right up.🫡🇺🇸🙏🏻😅

@ricardotorres6919 3 жыл бұрын

Wow searched for hours and this video was the exact model as mine. Thank you left a like 👍🏼

@thepressgirl

I know this is a few years old but omg I'm so grateful to finally stumble upon this video. It was hard to find someone doing this exact model. I was about to smash the whole thing out of frustration

@georgesoul6924 Жыл бұрын

I had to tug the handle to get mine to recoil, it only recoiled a little at a time.... it was because the coil spring had a bunch of rust causing the spring to hang up on itself from all of the friction. Sprayed a bunch of wd40 in the spring area and it freed up perfectly. 7 year old push mower kept outside.

@KudoShinichikun 2 жыл бұрын

Sadly I got my dads friend to fix my pull cord and I just happen to found this video and it’s the same as my mower lol

@josephlicorish1017

The pull cord has no tension when I take screwdriver out.

@robertboyd321

Good video mate.

@warrendavis5253 4 жыл бұрын

After failing and the repair center said 2+ weeks, I tried KZfaq again and found this - was perfect for my Poulan Pro 550. Trick was turn till tight & aligned (wasn't 7 turns) and cut cord exactly the same length as broken one - the Poulan cord runs up the push arms. Thanks Hank!

@MYGODis4me

Just fixed my Briggs & Stratton. Thanks for the easy to follow instructions, that took the guess work out of play. Now many years of cutting will be followed by many more cuts.

@screamline458 3 жыл бұрын

This video was awesome! Mom said the pulley broke so I drove down expecting to fix either the rope or the spring. I found the clip fell off, and watching the video helped me. Popped the clip back on and reassembled and she started right up

@dangruber5516 2 жыл бұрын

Hank you are a life saver! I knocked one of the pawls out. It did start with one pawl but I removed the cotter pin and the unbroken pawl went back in and works fine now! Thanks man!

@CandiRemsa-tt2sz Жыл бұрын

Thank you so much for this step by step informative video. The string and spring on my mower got tangled up and I was able to pull it apart and put everything back. Much appreciated!

@haeke69 4 жыл бұрын

after lots of attempts I went back to trusty youtube again and finally found this video . thankyou so much you saved me a bunch

@sideshow1297 Жыл бұрын

Thanks for posting this. I actually had a complete assembly that included the spring for a Brigss but in the process of installing it, the clock spring unwound on me. Yeah that was my fault. Anyway your method of getting that spring back in place worked for me. Great job!

@bronzechicken4437 5 жыл бұрын

I've found too on these, they did a rather big redesign on these in 2015, the quality went up considerably. I have a 2016 Bolens that's amazing to use, but my 2014 lacks in comparison, same engine too. In 2015, the governor springs changed, the recoil cup changed, the air box changed, and it looked to me like the thickness of the aluminum changed.

@johnheilig5681

This was very very helpful thank you so much you saved me a ton of money by just reinstalling the old one. Very good instruction clear concise and to the point I love it