Fixing A Poulan Pro Chainsaw That Leaks
Рет қаралды 36,558
2 жыл бұрынLinks to products I have in my tool bag.
Chemical spray bottle . amzn.to/3eWcGVs
Spark plug bench tester. amzn.to/3jEcZH3
Compression tester. amzn.to/2NMgeze
Spark Checker. amzn.to/3bnXjmA
Tygon Fuel Line. amzn.to/3aCGntm
Carb Adjustment tools. amzn.to/3k7cgxe
Primer Bulb. amzn.to/3dGYY9E
Fuel Filter. amzn.to/2ZC0T7i
Metering Diaphragm. amzn.to/3hsOR8F
The links above are affiliate links.
Thanks for watching. This Poulan Pro chainsaw only needed to have the fuel lines change, But after inspecting the Carb, It turns out it need more than just that.
@QuaabQueb 2 жыл бұрын
The Bob Ross of small engine repair.
@HomeGaragechannel 2 жыл бұрын
lol.. thanks.
@Jim-ie6uf 2 жыл бұрын
My wife bought that exact saw for me at a yard sale several weeks ago for $15.00 . Had to put a new carb and lines in it. The carb was a Hipa replacement one. Not an exact fit due to its throttle linkage setup. But manageable. Runs fine now. Good video
@HomeGaragechannel 2 жыл бұрын
thank you Jim S.
@escapetherace1943 Жыл бұрын
got the same deal on one, haha. 15 dollars @ a yard sale
@donkuwik3390 2 жыл бұрын
I've watched many videos that deal with this topic ,yours is the best. Thank you for your generosity in sharing this knowledge.
@HomeGaragechannel 2 жыл бұрын
So nice of you thank you Don Kuwik
@danteerskine7678 2 жыл бұрын
@@HomeGaragechannel great video. I would like to know what oil you can use in the 2 stroke chainsaw because I'm having a really hard time finding some decent 2 stroke motor oils for my 2 stroke generator at a point that I'm currently using Motul mineral 15w40 and any straight grade Sae 40 mixed with gasoline at the same proportion. Not the best thing to do but apparently it works, a little bit of visible smoke.
@nathanlovern5283 2 жыл бұрын
I have a little spark plug sand blaster that works well, have to use carb cleaner and air to remove all the grit.
@HomeGaragechannel 2 жыл бұрын
that's a pretty good tip
@StevenEverett7 2 жыл бұрын
Personally I always clean the plug first. Many places that sell plugs for chainsaws don't sell them separately but put them in a package with air filter and gas filter. I don't like buying things that I don't need.
@HomeGaragechannel 2 жыл бұрын
that's a pretty good idea, thank you Steve Everett
@rickthelian2215 2 жыл бұрын
Nice repair as always, it’s amazing what a spark plug clean can do, checking gapping is important too. Love the spark plug tester. I’m assuming the oil bar was oiling the chain, that little hole can get blocked with saw dust, another thing is importantly it doesn’t leak oil. Have a nice Easter😀🇦🇺
@HomeGaragechannel 2 жыл бұрын
thank you Rick Thelian, and yes it was oiling nicely
@johnclarke6647 Жыл бұрын
Isn’t it nice to see how folks maintain their saws.🤓
@HomeGaragechannel Жыл бұрын
LOL!!
@RussellBooth1977 2 жыл бұрын
In my dads Honda GX35 4 cycle powered line trimmer I had to replace the spark plug because it was playing up like that,the plug was actually shorted out internally by a few thousand Ohms. When I did a small automotive course at tech once they explained why they check the spark plugs for spark in a vacuum chamber after sandblasting them, it's because as in your case it might not fire in the combustion chamber despite firing on the tester under no vacuum. The vacuum chamber simulates the combustion chambers environment !
@HomeGaragechannel 2 жыл бұрын
that's pretty cool, I didn't know that. thank you Russell Booth.
@mariocestra1156 Жыл бұрын
I’ve found over time that when things go wrong it’s generally user related. Yes quality and manufacturing isn’t what it used to be in this disposable society we live in today. If we take a few minutes to actually read the manual re the use and storage, our equipment will always work and not let us down. Just my opinion.
@lewiemcneely9143 Жыл бұрын
I tried building the original carb and the got a new one. It would run until I started opening the extra butterfly and then it'd lean out. I had a new plug in it too but the son-in-law said he got it running but he sure scarfed up the 261 as it went by. I'll never understand why they have that carb setup anyway but it's gone and I grin every time I think about it being somewhere else. Glad you got it fixed. Blessings!
@butler386 2 жыл бұрын
From what I have seen the spark plug usually is not the issue so I would check it later. But this is a great lesson and certainly should be considered when repairing engines of all types. Great job. Thanks for the video
@HomeGaragechannel 2 жыл бұрын
thank you D Butler for your time
@mickeykim3559 2 жыл бұрын
PP4218 chainsaw you will either love or hate it. Speaking of spark plug, make sure you set the gap to .030" instead of factory setting .025 gap. These model are notorious for not starting after warm up and usuage due to spark plug issue. Also sometime they can be finicky with Champion spark plug, NGK spark plug do work well. If you have a good one, it can a real ripper.
@HomeGaragechannel 2 жыл бұрын
thank you for the information Mickey Kim.
@whiterecluse9442 2 жыл бұрын
Gap to 0.30 and remove spark arrestor and she rips.
@philliphall5198 6 ай бұрын
I agree on gap to 0.030
@buddyreed2623 2 жыл бұрын
The only problem I have had with my Craftsman chainsaw is the rotting fuel lines. This was caused by using ethanol gas. After replacing the lines, all I have used is non-ethanol gasoline, I don't even bother to empty the tank. It cranks after sitting for 2 years or more. I just shake it to mix the oil and gas again. Have good days!
@HomeGaragechannel 2 жыл бұрын
that's pretty amazing. thank you Buddy Reed.
@mrmerhtin3625 2 жыл бұрын
after this video I will check the spark plugs whenever I have issues. Thanks!
@HomeGaragechannel 2 жыл бұрын
no problem
@TecumsehRulesbcserk 2 жыл бұрын
Today I picked up an old Snapper snowblower from the repair shop that my first job was at. So I got it to my place and gave the carburetor a good cleaning. Unfortunately the entire choke assembly was missing so the thing had no choke. I had to use my fingers to cover the air intake while I pulled to make up for that. The thing started and ran great, I’ll be getting those parts for it soon
@HomeGaragechannel 2 жыл бұрын
very nice haul!
@hansb.8 2 жыл бұрын
I always learn something new here. Thank you very much.
@HomeGaragechannel 2 жыл бұрын
Glad to hear it!
@Patrick4959 2 жыл бұрын
yep i would install a new spark plug plus very easy to cure most starting problems in my case when the fuel and spark and even compression and fuel delivery is good still and once done 9 times out of 10 it starts up for me and hardly any problems and it helps to reduce flooding too and i believe this video would help someone out if they had a McCullough CS-420-T 42cc 2 stroke aka 2 cycle engine with a 16" (inch) bar from memory which i have and yep some people say it,s complicated but yeah watching this video helps me out for sure.
@HomeGaragechannel 2 жыл бұрын
thank you Patrick Stapleton for the information, and I hope so as well.
@Patrick4959 2 жыл бұрын
@@HomeGaragechannel my pleasure mate and yep very similar by design from my view but yeah it might help me out on a basic tune up one day etc.
@ramadinsookhoo6141 2 жыл бұрын
With my 025 Stihl chainsaw I had to replace the fuel lines and gromit, however it ran well for a few seconds before it kept cutting off. I cleaned the carburetor and I realized that I have to get a rebuild kit for the carburetor. I also need to replace the bar because it is bent but other than that I'm quite happy with my 32 year old chainsaw. I forgot to mention that I'm also using the original sparkplug from 32 years ago bro.
@HomeGaragechannel 2 жыл бұрын
wow simply amazing! goes to show you what happens when you take care of them.
@ramadinsookhoo6141 2 жыл бұрын
@@HomeGaragechannel you sure right about that bro👍👍
@jeffcox2446 2 жыл бұрын
Yes I have same saw it’s been really hard to start but runs fine when you get it started any ideas your videos are great and very helpful keep ‘em coming
@HomeGaragechannel 2 жыл бұрын
Thanks I appreciate it. IF the carb is fine, I would look at the Engine, it might be worn, so every pull, doesn't pull the Fuel from the Carb like it should.
@jeffcox2446 2 жыл бұрын
@@HomeGaragechannel thanks so much I check that out
@mikespain8655 2 жыл бұрын
I clean sparks all the time. Otherwise, I would have to stock lots of different plugs, or run to the store a lot. Spark plugs last for several years. Think about a car going100,000 miles before replacing plugs.
@HomeGaragechannel 2 жыл бұрын
you are correct, thank you Mike Spain.
@philliphall5198 2 ай бұрын
I have lots of used ngk plugs for them and I use a very old champion spark plug cleaner and tester I change after use and clean up and gap at .030
@HomeGaragechannel 2 ай бұрын
Great tip!
@markharris4260 Жыл бұрын
Nice video very well done , and checking the spark plug is always good
@HomeGaragechannel Жыл бұрын
thanks again.
@stevenchandler4218 2 жыл бұрын
Another good job HG 👍
@HomeGaragechannel 2 жыл бұрын
Thanks 👍
@brianking1138 2 жыл бұрын
I had one chainsaw that still wouldn't run after cleaning the plug. I put a new one in and it ran great. Usually cleaning the plug works fine.
@HomeGaragechannel 2 жыл бұрын
Great point! thank you Brian King
@harrygregory6227 Жыл бұрын
your vids are supra entertaining, handy, and helpful.
@HomeGaragechannel Жыл бұрын
Glad you like them!
@christophermarshall5765 2 жыл бұрын
Nice job. I'd clean the plug first. If no difference, then I replace the plug, & look for other problems.
@HomeGaragechannel 2 жыл бұрын
me too Christopher Marshall.
@electroddxful 2 жыл бұрын
Great repair my friend 🙏👍🙏👍
@HomeGaragechannel 2 жыл бұрын
Thanks for the visit RayFpv
@powertoolexpert6999 2 жыл бұрын
Top of the morning
@HomeGaragechannel 2 жыл бұрын
hello
@cobhc1986 Жыл бұрын
I’m really enjoying your videos as I also work on chainsaws and other small engines. I have a little tip that I’ve done before and it works well. You can drill out the filter line hole in the gas tank so that all the fuel lines are the same size on those saws
@HomeGaragechannel Жыл бұрын
thank you Hester's Workshop and thanks for the tip.
@Turningwrenches85 2 жыл бұрын
I have a chainsaw like that. A friend found for me I am fixing up for me to use I am having issue with it also after cleaning the carb I will check the plug on mine again to see if I have carbon buildup or if I have the carb adjustments out of sort I hope 🤞
@HomeGaragechannel 2 жыл бұрын
good luck with the saw
@Turningwrenches85 2 жыл бұрын
@@HomeGaragechannel thank you
@dagorithe 2 жыл бұрын
I really enjoy your videos as well. The more than entertaining, they are concise and informative. One question for now, where do you get (or how do you make) your fuel supply tank? i.e. the condiment bottle. More questions to come this spring as I get my equipment out.
@HomeGaragechannel 2 жыл бұрын
I get them from Amazon, there should be a link, in the description for the video.
@LynxCarpathica 11 ай бұрын
This saw is based on the HQ240/236/235 series. It actually has a better carb than the real deal. The low compression is most likely caused by the 2 plastic inserts in the cylinder along with a bad piston ring. The cylinders are usually in very nice condition still. Example: 574 19 09-01. Be sure to select the correct one depending on cubic inches.
@HomeGaragechannel 11 ай бұрын
thank you for the information
@williamcleanthous2812 2 жыл бұрын
great video mate keep up the good work. I'm a small engine mechanic and work on a lot of those saws and most of the ones Iwork on have lower than normal compression. Not sure what this is due to.
@HomeGaragechannel 2 жыл бұрын
Cool, thanks, I would assume cold engine usage,
@shawndubay4050 Жыл бұрын
Would pull the stock plug and cleanse it will a mapp torch the same way you did. If it happened again I would buy a iridium fine tipped plug and not have to worry about the it again. All my equipment still have The plug that they came with except for my twenty year old Stihl FS-250 R brushcutter/trimmer. Just replaced the plug with a iridium plug and runs like new.
@HomeGaragechannel Жыл бұрын
thanks!
@shawndubay4050 Жыл бұрын
@@HomeGaragechannel your welcome. I think the fine tipped electrode produces a very hot and reliable spark initiating a faster and more complete combustion. I do know is they are faster to start, quick acceleration from idle to top end. All around just alot better especially with lower compression engines. Can't go wrong with Bosch iridium spark plugs. Two cycle and four cycle. My sports car has noticeable power and torque gains in all five gears.
@WillsSmallEngines 2 жыл бұрын
awesome video
@HomeGaragechannel 2 жыл бұрын
Thanks for the visit
@apatterson8128 2 жыл бұрын
I would have kept banging my head against the wall fiddling with the carb. lol Where did they think that spark plug was going? Man, it was tight. Thanks Home Garage
@HomeGaragechannel 2 жыл бұрын
I know right, Guess they didn't want it to fall out, while it was running.
@moozuke5001 2 жыл бұрын
hey home garage. i recently got a kbl23a kawasaki trimmer. the engine was stuck with old sticky fuel. i got some degreaser inside the cylinder to break up the sticky old fuel. but when i took the cylinder head off the piston i had a 5mm by 5mm chip strait out of the BOTTOM CORNER of the piston there are no scratches on the cylinder wall. can i still run this engine as it is a very good trimmer and it will be hard to find parts
@HomeGaragechannel 2 жыл бұрын
unfortunately, I don't think I would use the trimmer, with a chipped piston. I would consider replacing the piston.
@robertmailhos8159 2 жыл бұрын
Well at least you are doing better repair shops they are mostly in the repair business for high end stuff not the big box store items
@HomeGaragechannel 2 жыл бұрын
you make a good point. I don't know who worked on this one but I'd like to know
@robertmailhos8159 2 жыл бұрын
@@HomeGaragechannel you are interested in the work some one else did because of the messed up condition.this machine was in I don't blame you for wanting to know that information
@gusnaif 2 ай бұрын
I have similar problem with Poulan Pro 5020, where is starts then stalls. I have changed everything I can think of new carb, fuel filter and lines, air filter, spark plug, new fuel, and still have the same issue plus smoking more after the new things throwing at it. What else could do that? Bad fuel cap?
@HomeGaragechannel 2 ай бұрын
if the fuel lines, and carb have been changed, I would then try adjusting the carb to deliver a bit more fuel to the engine
@williamsnow1531 2 жыл бұрын
I would first clean the plug, then replace it if that didn’t do the job…you know….waste not, want not. Poulan to me is right up there with the a Weed Eater brand, it’s a cheap chainsaw for home use only.
@HomeGaragechannel 2 жыл бұрын
I know how you feel, thank you William Snow.
@animered1986 2 жыл бұрын
How do you know if the chain is over tightened??? this one seemed like it was, or maybe I am used used to seen them being used a little lose.
@HomeGaragechannel 2 жыл бұрын
care grab the top of the chain, and move it along the bar. IF it's hard to do, but it does move, than the chain is too tight
@jameslawnmowerrepair 2 жыл бұрын
Ok I have a problem with this carb it's not on this chainsaw but a poulan pro weedeater and when I prime it it just leaks out the inlet so I need help with that if you can help thank you
@HomeGaragechannel 2 жыл бұрын
sure, it means there's an internal leak inside carb, because it's not supposed to do that. The easiest thing would be to replace the carb, unless you're willing to remove the carb and find out where the leak Is coming from.
@jameslawnmowerrepair 2 жыл бұрын
@@HomeGaragechannel i forgot to mention it does that to both the old carb and a replacement carb is there something else that it could be
@HomeGaragechannel 2 жыл бұрын
yes, you probably have the lines on the wrong port then
@Rose_Butterfly98 2 жыл бұрын
Funny thing is, sometimes dirty spark plugs is why cars don't run properly. People don't try to clean it and just change the spark plug which is much more expensive. Honestly wondering how the last person even torqued that spark plug in so tightly.
@HomeGaragechannel 2 жыл бұрын
you are absolutely correct
@smallengines1018 2 жыл бұрын
Also, do you have any idea why my throttle cable keeps sticking? When I rev it the rpms won't go back down. The throttle cable isn't the issue it's the little plate above the spring
@HomeGaragechannel 2 жыл бұрын
is this on your chainsaw?
@smallengines1018 2 жыл бұрын
@@HomeGaragechannel Leaf Blower
@HomeGaragechannel 2 жыл бұрын
if it's related to something on the carb, I would just replace it.
@smallengines1018 2 жыл бұрын
@@HomeGaragechannel I don't think it's the carb, the carb works fine it's just the throttle plate won't stay in the idle positions so I have to push it forward to Mannually idle it.
@MikeJones-jr5hb 2 жыл бұрын
I don’t believe I’ve ever run across a bad spark plug , just carbon up
@HomeGaragechannel 2 жыл бұрын
come to think of it, I think it's only happen to me once, with an E3 plug
@farmbossmikey1350 2 жыл бұрын
i had a crastfsman same saw as the poluan and how do i put a groment in the hole on top of the fuel tank
@HomeGaragechannel 2 жыл бұрын
why did you do that?
@farmbossmikey1350 2 жыл бұрын
@@HomeGaragechannel i accidentey drill a hole you know where the fuel line gose
@crazzywolfie 2 жыл бұрын
you should warn your friend about that carb. as long as it works it is fine but the plastic arm on the upper butterflys looks cracked. as long as it is still in place it is fine but when it breaks and falls off the engine won''t do much other than idle. they make a upgraded carb with all metal arm and linkage but usually about $20. for him it may be worth the $20 but i generally won't waste money on a cheap saws.
@HomeGaragechannel 2 жыл бұрын
thank you for the tip crazzywolfe.
@wildhog3217 2 ай бұрын
I have the Poulan Pro PR4218 and my problem is getting too much chain lube at just idling. I can see oil oozing out of oil port while it idles. I didn’t see any adjustment screw on bottom of saw. 🤷
@HomeGaragechannel 2 ай бұрын
it'd take that any day over the opposite situation of not getting enough oil
@mikelang595 2 ай бұрын
How many turns on L & H speed adjustments?
@HomeGaragechannel 2 ай бұрын
the turns on this carb may not necessarily work for your machine.
@philliphall5198 4 ай бұрын
I have good luck with 0.30 cap on my poulan saws, 4218
@HomeGaragechannel 4 ай бұрын
good choice
@farmfan4382 2 жыл бұрын
I check the spark by feel lol
@HomeGaragechannel 2 жыл бұрын
lol..
@farmfan4382 2 жыл бұрын
@@HomeGaragechannel no I’m serious surprised I’m not dead yet lol
@smallengines1018 2 жыл бұрын
Would you be able to make a video of how to put spring back in the boot of the ignition system? Mine came off while I was trying to change the Spark plug
@HomeGaragechannel 2 жыл бұрын
I'll try and see what I can do.
@bosshogg6 2 жыл бұрын
Nice video. Where did you get your little fuel squeeze bottle?
@HomeGaragechannel 2 жыл бұрын
from amazon.
@TheDronzDr 2 жыл бұрын
I would like to know we’re did you get the spark ⚡️ plug tester 15:45 on your work bench? The one you showed in the video. I would love to have one of them.
@HomeGaragechannel 2 жыл бұрын
sure here's the link, these are pretty affordable too. amzn.to/3jEcZH3
@TheDronzDr 2 жыл бұрын
@@HomeGaragechannel Thanks your man I just ordered it
@HomeGaragechannel 2 жыл бұрын
no problem and thanks for watching.
@powertoolexpert6999 2 жыл бұрын
To ya
@HomeGaragechannel 2 жыл бұрын
right back at ya.
@LJ-ow2ph 2 жыл бұрын
I have a stihl bg56 which cuts out if the throttle is pulled, the carb is clean, it has compression and I cant find any leakes. Do you know what could be causing this?
@HomeGaragechannel 2 жыл бұрын
Sure, the Carb might need to be adjusted , or the spark arrestor screen might be clogged. If the Carb is brand new, it might need the adjustment to work with a blower that isn't new.
@LJ-ow2ph 2 жыл бұрын
@@HomeGaragechannel I cant find a way to get the spark arrestor out so I'm guessing it dosnt have one and iv tried adjusting the carb to give it more fuel but it stays the same. There are limiter caps on so I might try to remove them.
@HomeGaragechannel 2 жыл бұрын
let me know how it goes.
@LJ-ow2ph 2 жыл бұрын
@@HomeGaragechannel iv got 2 blowers with the same problem now do you have a video on how to remove the caps?
@flankingfoxtrot 2 жыл бұрын
Should I empty my fuel tank on my sthil FS 85 after use
@HomeGaragechannel 2 жыл бұрын
I would, I do on all my stuff, I just pour the Fuel back into my Fuel container.
@viperstrike3827 2 жыл бұрын
Only if it is going to sit for more than a few weeks imo. I would store it with engineered fuel, I like doing that better than storing them dry.
@HomeGaragechannel 2 жыл бұрын
very true, engineered fuel is some of the best stuff.
@jerrysoutherland662 2 жыл бұрын
Great video,did you get your spark checker on amazon.
@HomeGaragechannel 2 жыл бұрын
the "poorly" named Sparking plug tester, yes I did,
@jameslawnmowerrepair 2 жыл бұрын
If there is a harbor freight store near you thats where I bought all of my spark checkers and they have worked for a long time
@jerrysoutherland662 2 жыл бұрын
@@HomeGaragechannel Thank You wery much.
@Bigalhunting 2 жыл бұрын
Chain seems to be tight or the oil Port is clogged. Could just be me though. Nice work
@HomeGaragechannel 2 жыл бұрын
I think you might be right.
@aivory3336 2 жыл бұрын
hey home garage can you did a video on a zero-turn mower or something similar
@HomeGaragechannel 2 жыл бұрын
I'll try, thanks for the suggestion
@aivory3336 2 жыл бұрын
@@HomeGaragechannel no problem
@beaud3035 2 жыл бұрын
I remember when Poulans used to be great saws. Now its a bit dodgey
@HomeGaragechannel 2 жыл бұрын
I understand that feeling too.
@mrmerhtin3625 2 жыл бұрын
14:38 🤣😂
@HomeGaragechannel 2 жыл бұрын
thank you Mr Merhtin.
@fvfgx 2 жыл бұрын
I think you have a very good chance of being a police hostage negotiator just give the police department your KZfaq channel and they'll hire you on the spot
@HomeGaragechannel 2 жыл бұрын
thanks
@manuelmaldonado4951 2 жыл бұрын
hi...what happens if i use 4 strok oil to mix gas for a 2 strok engine?
@HomeGaragechannel 2 жыл бұрын
it would work, But it will probably smoke, and the concentration might be different, because it's not 2 cycle oil.
@manuelmaldonado4951 2 жыл бұрын
@@HomeGaragechannel thanks!!
@snoopysrc 2 жыл бұрын
Working on it never 🤕
@LeoMAUW 2 жыл бұрын
I have got a smal engine from 1994 and it has got 95 psi. Is that good for its age?
@HomeGaragechannel 2 жыл бұрын
what kind of small engine is it for? lawnmower engine, blower, edger or weedeater,
@LeoMAUW 2 жыл бұрын
A weedeater with a metal blade. (sorry for not specifying)
@HomeGaragechannel 2 жыл бұрын
the reading isn't bad, for the age.
@LeoMAUW 2 жыл бұрын
@@HomeGaragechannel good to hear
@animered1986 2 жыл бұрын
Once it hits 60-70 it is really not hard at all to replace old rings with new ones. Never hurts to clean out the exhaust ports while you're doing this too. I have a 2 cycle lawn boy from 1984 I have rebuilt a few times. Still love cutting grass with it. They just don't make like they used to anymore. Sadly i am on my last set of rings. Can't seem to find any more new ones online anywhere. Maybe ill get lucky and see a set online in the next few years.
@jjjuarez312 2 жыл бұрын
Your missing step one taken the muffler off... and checking the condition of the cylinder and piston!! I wouldn't even bother working on thoses brand of chainsaws waste of time and effort and plus money for parts that's just me... good videos thought..
@HomeGaragechannel 2 жыл бұрын
Great point!
@patrickhuntoon534 Жыл бұрын
Where DID YOU GET The Plug Tester Man?!!!
@HomeGaragechannel Жыл бұрын
there's a link in the description but I get mine from amazon. you can get them at most auto parts stores too.
@jackmcminn2520 Жыл бұрын
The gas and oil caps on this saw get stuck and chain tightening knob is a joke
@TheRedneckHobbit Жыл бұрын
What is the normal setting for the H and L screws? I have the same chainsaw and I'm having trouble getting it to run.
@HomeGaragechannel Жыл бұрын
No the setting I used are only for this particular saw. Yours may not be the same.
@TheRedneckHobbit Жыл бұрын
@Home Garage the only difference between yours and mine is that yours is a PP4218AVX and mine is a PP4218A. The carb on yours is identical to mine. I have a KZfaq channel. I have a video about the chainsaw.
@HomeGaragechannel Жыл бұрын
I'll check it out, thanks
@brianeastman3547 Жыл бұрын
I recommend the non ethanol pump gas ⛽
@HomeGaragechannel Жыл бұрын
very good advice
@brianeastman3547 Жыл бұрын
@@HomeGaragechannel thanks man
@HomeGaragechannel Жыл бұрын
no problem
@Idkx2ummm 6 ай бұрын
Damn bro gotta put caps on everything why is that?
@HomeGaragechannel 6 ай бұрын
oh let me fix that. thanks
@Idkx2ummm 6 ай бұрын
😂
@Idkx2ummm 6 ай бұрын
And you also inspired my kid so thanks 🤣 But really you did so thank you so much
@Idkx2ummm 6 ай бұрын
And or also there were micro cracks in it and it was arcing that’s more likely
Raley's Small Engines
Рет қаралды 38 М.
EXiAN BATMAN / Dont Touch My Bike
Рет қаралды 18 МЛН
𝐆𝐀𝐍𝐉𝐔𝐁𝐀𝐒_26
Рет қаралды 989 М.
Lilsnoop213
Рет қаралды 68 МЛН