Fixing Crank Threads with Pedal Taps!

  Рет қаралды 10,484

DanyoSports

DanyoSports

3 жыл бұрын

The pedal taps are as simple as installing the pedals, the left tap goes to the left crank and the right tap goes to the right crank.
Before you begin, make sure to apply some oil or lubricant on the threads.
Screw in the pedal taps, turn slowly, turn forward and backward repeatedly, until the tap has gone all the way through.
Remove the tap, clean up any residue and install the pedals.
Tracks:
Pace by Lahar / musicbylahar
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/_pace
Music promoted by Audio Library • Pace - Lucjo (No Copyr...
Free Range by Mona Wonderlick / monawonderlick
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/-free-range
Music promoted by Audio Library • Free Range - Mona Wond...
#pedaltap #raceface #bikerepair
Danyo Sports Channel Episode 102
KZfaq: / danyosports
Reddit: / danyosports
Facebook: / danyosports
Instagram: / danyosports
Twitter: / danyosports

Пікірлер: 12
@MrRedPony01
@MrRedPony01 3 жыл бұрын
It’s even better if you start from the back side. That way the tap is lined up with good threads. When it hits the bad threads it just fixes them, rather than cutting new threads all the way.
@DanyoSports
@DanyoSports 3 жыл бұрын
Yes, it would be better.
@jjjtung
@jjjtung Жыл бұрын
if you start from the back of a left crank, would you still need to use a left tap?
@AreaCode865
@AreaCode865 Жыл бұрын
@@jjjtung my question also
@pauloles3528
@pauloles3528 Жыл бұрын
I just fixed a nautilus recumbent bike pedal using your great instructions. Worked perfectly. Thanks
@semajharris1369
@semajharris1369 2 жыл бұрын
Great video! I’m using the tap to fix an elliptical pedal!
@Mamudy
@Mamudy Жыл бұрын
link please 🙏 my damaged crank is 170mm left side but I do not know the size of the tool you used
@andihanpasri
@andihanpasri 3 жыл бұрын
👍👍👍 Thank's for sharing
@rotarythread
@rotarythread 2 жыл бұрын
Instead of using WD-40, use engine oil or grease and make sure that the pedal is secured and not moving, you do not want to cross thread it :)
@HELIOSSTUDIO
@HELIOSSTUDIO Жыл бұрын
How do I know which one is left and right?
@satshortcuts
@satshortcuts 11 ай бұрын
the chain is on the right
@enilsonbarahona-fm5hc
@enilsonbarahona-fm5hc 7 ай бұрын
Size tap
How to Remove and Reinstall the Pedals on a Bicycle
7:25
cjhoyle
Рет қаралды 196 М.
How Many Balloons Does It Take To Fly?
00:18
MrBeast
Рет қаралды 199 МЛН
WORLD'S SHORTEST WOMAN
00:58
Stokes Twins
Рет қаралды 100 МЛН
Nastya and SeanDoesMagic
00:16
Nastya
Рет қаралды 37 МЛН
bike crank thread repair
11:15
retro bike stuff
Рет қаралды 14 М.
How to NOT Strip Crank Arm Threads When Removing Cranks
8:27
RJ The Bike Guy
Рет қаралды 61 М.
How To Repair Stripped Crank Arm Pedal Threads
5:57
Joey Mesa
Рет қаралды 93 М.
Crank Saver Kit 1695MB1 | Product Overview | Unior Bike Tools
2:29
Unior Bike Tools
Рет қаралды 117 М.
Removing VERY Stuck Crank Arm With Damaged Threads
7:35
RJ The Bike Guy
Рет қаралды 236 М.
Stripped Bolt Threads Repair STRONGER CHEAPER *NEW easy WAY*
11:40
sixtyfiveford
Рет қаралды 297 М.
HOW TO REMOVE STRIPPED OR STUCK CRANKS IN 5 MINUTES!
12:26
D2 WrenchWorks & DIY
Рет қаралды 58 М.
Pedal thread repair
3:11
Dirk Roos
Рет қаралды 7 М.
A woman comes a plan to teach her indifferent husband a lesson #shorts
0:44
Fabiosa Best Lifehacks
Рет қаралды 3,8 МЛН
ДОМАШНЕЕ ЭСКИМО//ПРОВЕРКА РЕЦЕПТА ТИК ТОК
0:22
ОЛЯ ПЕРЧИК
Рет қаралды 1,2 МЛН
Don´t WASTE FOOD pt.3
0:20
LosWagners ENG
Рет қаралды 20 МЛН