Just received my P1000 and Ordered this quick release plate today. Amazing stuff and appreciate the work.

Joel sells an amazing Plate! arrived to the UK in no time. The design and fit is incredible ,and I'm overjoyed! many thanks Joel 21/2/23

I love the time you put into this and explaining every aspect of it. I got my P1000 a month ago. Love it - but the shake makes me crazy! I ordered this from you as soon as I saw your video and it might arrive today! I cannot wait.

Joel, You are mesmerized watching the 3D printer work and I am mesmerized watching you figure out how to get the results you need. Having patience and being willing to stick with a task until it's solved will serve you well in life. I confess my real fascination is with the end product - the actual photography- but watching you go through this process is also enjoyable to watch. You are a gifted young man in so many ways. Kudos to you.

Hi Joel, I have recieved mine a few weeks back and it is perfect, after a long search your plate is god mode on support plates for the P1000, thanks very much and greetings from the Netherlands

I just ordered one of these, but to be honest, I watched the video last night and I was sold, today I ordered one. I love the video.

I genuinely admire your perseverance & ingenuity in this endeavour. And as a 54 year old man, Veteran, then Attorney and CEO of several multinational companies but now comfortably retired with an eight figure investment fund, please believe me when I tell you that your mindset and determination will guarantee you success at ANYTHING you want to achieve in life. BELIEVE in yourself, have confidence in yourself and when you know that you have something and that you are right, try try and try again until you achieve it. Sure, you won't always get it right first time, but push on just like you did with this and eventually you will succeed. Now... this little anti-shake clamp for the Nikon P1000 may not bring you your millions, but you keep on applying that grit and tenacity to any good ideas that you have, and I promise you one day you will hit the jackpot. I did... and you will to. Now I'm heading over to Etsy to buy one of your clamps for my Nikon. Good luck to you , young man!

Port Orchard, WA. It sounds like you have solved the problem that Nikon left us with. I watched the video and was impressed by your perseverance and ingenuity. I ordered one. I wish you much success, Thank you!

Ordered and it's on the way. The effort and dedication I just watched in the video is absolutely amazing! I hope you're continuing to do great things. Well done Joel!!!

This THE best product for the P1000! Order & delivery process easy & quick. Amazing product. Thanks Joel!

I am considering buying a P1000. I have 5 3d printers so the first thing I thought of was designing a QR plate. Then I found that Joel has already done the work, and has printed plates available in carbon fiber. I don't want to start printing CF and Joel's price is reasonable. If I decide to buy the camera I will definitely order Joel's plate the next day. If I designed my own it surly take several iterations, field trips, and filament to get it right. Thank you, Joel.

Just ordered one. Thanks for taking us through the process you endured. Keep on problem solving Joel :)

Hey Joel. Just received the new mount. Very sturdy! Once on the P1000 bottom mount, I fitted my Manfroto mount to that and it's perfect! I've got about 3" of slide so I can get the bulk of the weight back to compensate for the zoom of the barrel. Figures it takes a talented DIY'er to come up with a product that no mfg can! Nice job!

I have a Nikon p1000 using the mount described in this video along with a heavy duty speaker stand (tripod lower/mono-pole top) with fluid head adapter and a 360 Degree Panoramic Gimbal. It has excellent stability at full zoom. This mount described in this video made all the difference. NOTE: I did apply some small double sided tape to one area to help absorb some of the jitter. I HIGHLY recommend getting this item for your Nikon CoolPix p1000. Thank you for an excellent product. After watching this video I honestly feel like the price is worth twice as much!

Just loved your ingenuity. Thumbs UP!

This is awesome Joel, I just ordered one tonight. Thank you

You're an ace. I've just bought this from your Etsy store

Hi Joel, I'm Jörg from Frankfurt/Germany and I bought this "camera stabilisation" from you via Etsy-platform this July 2023... ...and what I want so say: Thank you very much for this great tool. Ordering and (fast) delivery was without any problems and the price is also okay and adequate for the effort this tool brings to me. Works very fine and moon and long distance footages mostly looking much better than before. Thanks again and Good Luck for you every times....

Can’t believe Nikon hasn’t fixed this problem. Thanks just ordered one.

oh man! so glad u selling these....

Excellent piece that does the job it’s supposed to do perfectly well- super fast delivery through Etsy which surprised me 3 days if I remember correctly it’s definitely worth buying for sure Thankyou❤️💚👍🇬🇧🇬🇧

Just placed an order can’t wait to use it thank you so much for all your hard work. subscriber….

Amazing works👍

awesome frikin product ... love mine

Just ordered one from you. Thanks for the video, really sold it to me. So much work for you, thanks for sharing. This should make take shots of the Moon without it blurring. Next thing to buy is a star tracker for perhaps Saturn or Jupiter. Fingers crossed.

Hi Joel, I deeply appreciate your efforts as I ordered your 3D print off Etsy and the next only alternative was a piece at $150! Thank you for saving me half my money - I really appreciate that. I am excited to see how well it works, the shifting center of mass issue has plaqued many Nikon P1000 users when using a tripod.

Super impressive!!!!!

hi Joel. i just ordered 1 & waiting for it's arrival

Hats off to your hard work 👌👌👍👍

Despues de ver el video directo a etsy para la compra. Muchos exitos

Hi Joel, I just got my mount in the mail. I will try it this weekend.

Would love to get one of these

Brian White in Henderson NV here, you are an absolute genius! Thank you! Just ordered one after doing research on stabilization, and a long plate and did a small search here on KZfaq and there you are solving the issue and now I feel like I'm in an exclusive club that will soon own the perfect solution for stabilization! I just ordered from your Etsy account! I can't wait to get this! What is the turn around on orders? I need it for the punk rock museum here in Las Vegas asap!

thanks, your video is very useful

Will this help if not using a tripod? I have the same stabilization issue when holding the camera zoomed in - especially while shooting moving animals. Hopefully this will help - ready to place an order if it will! Thanks for taking the time to fix and create this video!

Hi Joel, I was thrilled to see that someone finally had a solution for the Nikon P1000 shake. Firstly, when on a tripod do you cancel the Vibration reduction option when using a tripod, and how much is the stabilizer which you are currently making.?

Hi Joel. I recently purchased your very nice stabilizing release plate for the P1000. Everything works great, so thanks for taking the time to engineer and produce such a nice product. Just one comment: You should radius the corners of the plate a little. They are very sharp as is, and I am reminded of that each time I grab the camera to set up. Thanks again for your time and effort in making this solution.

Wonderful 👍👍👍

Where is the comparison footage vs. Without the support? Does it really work?

Hi, thanks for your solution idea. If I buy through Etsy, could the delivery address be in Türkiye? If it's not possible, do you have a place on Amazon?

Will you be making more anytime time soon?

hi friend I bought one from etzy and waiting for its arrival. I will do a video once receive it. hope to have a wonderful filming.

I dont use digital technology just old self made transformator solder gun(same that is available in stores) that i melt very small portion of plastics..... Soo i use paper as isolator on camera and start melting and connecting drops of plastic on camera. You end with resilt you want .... Its best to put more platic that you need and later polish it with files. You can put steel elements inside for more power when adding drops of plastics.(solderimg with plasitic)...i was made accesories like this for prototype projects from 10 years old ... But ther is need to thinking about what you doing when you doing this.if someone want make it in this method just make some experiments at start...be patient and dont rush. Insert to srew tripod can be abtained from old cameras everyone have them ...or order some adapter and file down not neccery part etc.

Nice video! Can you recommend a decent tripod and arc swiss mount to use with your item? looking to spend probably $200 total what would you recommend?

Great job! 👍 Your hard work pays off. How you make more, so when I get my P1000, I can get my.

Amazing, do you ship to Australia ?

Which tripod head / or type works well with this camera and 3d QR for stable vids?

I just subscribed. I bought a P1000 a couple of weeks ago. I would like one of your new mounts .i was wondering the price?

Hi Joel, I bought your camera mount this evening on etsy. I am also interested in buying a sturdy tripod and good head for it. I am open to any good advice or point me to a dealership.

I just bought a Nikon P1000. It's an amazing camera. For this new product by Joel Schat, to fix the Nikon's P1000 camera shake, has anyone posted another VIDEO somewhere to see the difference in camera shake "with" and "without" this new product? This product is exactly what I am looking for and I am glad I found this video. But now I am also looking for a video that shows the difference in camera shake "with" and "without" this new product. Also, does anyone know the best "tripod" out there for the Nikon P1000? I can't seem to find a good tripod for this camera. Thank you Joel Schat for all your efforts in creating this wonderful product.

I just ordered mine! I hope carbon fiber nylon is solid enough! :) Also i need to get a good tripod for it. Is the manfrotto 190go (aluminium) any good for this camera?

Ok, I bought it, curious...now to find a good Tripod, I have a Benro iTrip FIT29AIH1, would that do the thing?

Bro where I need 1 bad I can't decide on a gimbal stabilizer for portable use tho

Where can I buy it ?

How do we order one?

How come you didn’t show the results shooting with the camera outside? Or is this a scam?

Why not use a CNC or simply casting bronze?

Hi there, how much for one of your P1000 camera supports that you make/ Shipped to Australia? Thank you.Nigel

I purchased your bracket and love it. But, I have one complaint. The edges on the whole bracket are very sharp and it cut my finger. So, I took very fine sandpaper and sanded the edges of the whole bracket. Now it's perfect.

i would like buy one

I have no issue with its length/ weight but find it over compensates for movement sometimes. The bigger issue is the useless manual focus and the fact it has not got AF with manual override would be useful.

I wonder if this would work for the Nikon P950 ?

Sorry. I am from Indonesia. I want to ask how much the price reaches Indonesia. Thank you very much

Hello Joel... I new watching your youtube, because I have Nikon P1000 and find it stabilities plate. So how and whereI can buy your product. And important thing can you send to Singapore Country that item? Thanks Joel and God Bless you

I notice on Etsy you are currently sold out of your product...will this come back in stock?

I used a Manfrotto 293

Hi Joel where to order your product

sur Amazon je l'achète direct

How did you get on with selling these mate?

How do I order it ?

Shipping to Poland ????

I would say I would print it with 100% infill then it is hard for a camera. And petg would be enough. I to similar things for my 210 and 300mm lense on my normal non p1000 camera. For that need to be hard 100% infill is the best

Are you still selling these?

My P1000 was delivered from BC to NS for $8.37. Definitely cannot see myself paying $24 to ship a small piece of $60 carbon fibre. Shipping cost needs much work.

If it ain't one thing it's another Lol....Do you have any of these parts for sale????

item is sold out 😢

Joel can you sell me the product you developed for my P1000

Watching someone gets failed 3D prints is a good way to not try yourself

Never mind,found the link

,,,,👍❤

Come on, dude, you have shown the whole process, but you didn't show how your camera does work with and without the thing. Could you please share some examples?

maybe dont use ballhead tripod. and use fluidhead video tripod

i also love this camera makes me real expert with teh ladies

What a journey! Turned into such an awesome product. Stoked to see what you make next!