Said this before, stock looks so much better, Custom Dynamics need to go back to the drawing board, smoke lens looks great before startup, but those lights leave way to much damage behind!

Nothing wrong with the oem tails. They actually look good to me. Good video though. 👍

waiting on a company to make clear lens for the stock setup because those exposed holes in the fender are a no go

I’m sticking with stock for now. Great video as usual!!

I mean they look good I just don't like how recessed they are IMO but great video none the less.

I think stock looks better.

I think the stock looks good . The aftermarket ones do look awesome. Just seems like something is missing now .

They look great and love the wiring ideas. You’re right on. Custom Dynamics does make a black piece that goes around them. That will hide the bolts as an FYI. Love what you’re doing with the channel man

Great to see the options on the 2024 rear, not sure which direction I'm going yet. I will say I had Custom Dynamics LEDs all over my previous SG, loved the plug-n-play and brightness. I even emailed them to try get some sportbike LEDs built (RC-51) and the customer service/tech support was on point. First brand I looked at after getting my 24 home.

Great video ! Keep it up with the information.

Bawawawawa I put those on mine also . I love em . I don’t like the stock ones . I replaced them on my CVO . so much cleaner . I do want the thin line ones for the back of the bags but haven’t seen them yet . Rock on man !!!!

Looks great. Looking forward to see how you will deal with the holes on each side. Keep em coming. Great video every time.

That turned out to be a nice clean install. I appreciate you running the wire under the seat, no need for extra connection be exposed to the elements.

Great job bro! Bike looks sick! Good editing/ video, keep up the great work 👊 Also, a garage tour would be a cool video!

Clean wiring job you always make stuff look great.

Nah I’d keep stock i actually like how stock looks over those. And I would go nuts knowing that those holes are visible lol. Either way though you got a badass bike man!

Yay, Jesse has another video for us 🤗

I have the same bike. I also did the Custom Dynamic Taillights. I did a very simple DYI for the holes on the fender. I Got some gorilla duck tape and covered the holes inside the fender. Then I got some white paint on the duck-taped holes looks great. Not even the same color white but because of the angle when looking at it and the small holes, you can't even tell.

No way bro the stock tail lights are sick! Good vid though

I like the stock ones

my identical bike will be saying stock, these lights didn't do nothing for me. but I do appreciate all your videos. you can tell you're a engineer.keep it up

we’re all different and we all like different things, I personally think those CD lights look like an afterthought compared to the stock lights, not to mention it looks unfinished now

Looks awesome, I'll be doing something similar once I get a 2024 RoadGlide.

Never loved the stock tail light setup. Custom dynamics ftw. You may be able to find white silicone plugs for the holes. Check out their saddlebag latch lights and fork reflector lights, they're awesome and drastically up the side visibility!!

With the deep set of the lights how visible are the brakes and blinkers to others not directly behind you? There is a video idea!! thinking highway. They do look good.

Great job of showing the install. Like your detail approach with wiring. You are 100% right for doing it that way. Like to see what you will do with the fender holes.

Guess Taste is subjective.. I also don't mind the Stocks... I would like to Smoke them out.. And i thought they were LEDs already so not sure why the need for the resistors. I was under impression that it was needed when going from the older Incandescent lights.. I guess there is a different "power Pull" on the CD lights. Good vid as always !!

I think it looks clean. Good Video it's all about making it your own.

I agree with what you said in the beginning… They look like bug eyes… I said the same thing as soon as I saw the 2024’s came out… I originally said they looked like the eyes of a Looney Tunes cartoon character😂

It’s your Harley, do with it whatever makes you and you alone happy. You have a great channel!

The stock lights look great to me. Definitely an upgrade from the past years finally. Those do sit to far in between the bags and fender too.

I don’t hate the stock ones but the upgrades do look nice!

Nice job on the wiring. I dont mind the stock though. The tag is a improvement.

I have same ones on my 2012 RG Custom. Love the look and brightness!!! Looks good!! 🤘🤘🤘

Just did a the same swap on my RG. Great video bud!

I like the look, but i also like having the orange color for a blinker. Maybe they can make a version of these that has oranfe lights for blinkers in between the space of the red lights.

Knowing you, you’re going to fabricate a piece of metal with welded studs that go through the holes… You do nice work… Could you fabricate that piece of metal and have it come down to cover the bolts And the bracket and have it powder coated black?

Hey, it looks great! I did the same thing to my ’24 RG in Blue Burst a few weeks back. Just got back from a week-long trip to Panama City, FL, and didn’t have any problems with other drivers seeing me.

Great video!

Ciro 3D lights cover the ugly bolts at the bottom. I would have left the stock lights on before Custom Dynamics. R&D

I love the new Hardy 2024 models in all lineups.

Nice work. Love what you do, but I like the stock look.

🤘🏻Looking good man🤘🏻

Very informative

The biggest problem with those is getting an inspection sticker in many states. The lights can't be recessed in that far.

What size heat shrink tube did you use I’m getting these lights for my 2024 RG and want to make sure I get the right size!

I really wish Custom Dynamics would make a new taillight that fits in the stock location. I’m not a fan of deleting the factory taillights.

I run custom dynamics on my current bike and love them but on the 24s I would stay with the stock ones and saddlebag lights.

The stocks look great. If you don’t like them there are plenty 22’s and 23’s with low mileage for sale. Enough with the Autozone looking aftermarket electronics. Most of us buy a 2024 to look like a 2024. Most of the ones hating just can’t afford a new bike..

Well, I could’ve waited till the end 😂

I'd like to see an option where you can keep the stock look, but with smoked lenses.

Not to go off subject here but you hooked a headset up for ur Apple CarPlay to work in an earlier video. Do you have to carry that headset with you when you ride?

I think by recessing the lights like that you limited your visibility from the sides. but you did a great job installing them running the wires.

👍 Were you able to order all the parts from Thrashin Supply in a complete kit or did you have to buy everything separate ?

Dude, to be honest..stock looked better😂😢

You need to adjust your right shock as per the instructions in owners manual.

Man idk. I get the brightness aspect but I’m iffy on the looks. I like that the turn signals are orange instead of red honestly.

Also get the magic strobe from custom dynamics it wakes people up who are behind you

I finally got to ride my 2024 RG Just finished my 500 miles

Ya need some bag lights sequential ones would look nice

The main reason i wanted a Special and not a standard 2022, was because of the stretched bags. Now you have a bigger engine, newer bike, with standard looking bags. This thing still looks like an Indian no matter what you do to it

Like the licence plate look, but, stock lights look better

Didn’t the stock sticker out so you could see them indicating from the side, any liability of them being recessed and not viewable from side traffic? Enjoyed the video regardless.

Appreciate the video but the stock ones looks better in this case.

Could you put a link to these please

Hey ive got exact same bike and live in WA state. What part are you in? I live in Monroe.

rik rack makes cover for the bolts under the new CD lights.

thats the whole purpose of the rear end to look NEW! new body style New Look ..... if I had that it looks like my older CVO? IMO

I mean they are cool… I just don’t think they are significantly better than the stock for the trouble.

Put dual exhaust on!😢

Nothing wrong with stock.

If only they made something that literally just replaces the OEM light but keeps the mounts so you don’t have holes and stuff. Stock look really nice just need to be smoked

Really!?!? It looked better before.

Harder to see your lights from the side now holes in the fender are showing. You guys will learn one day you are being ripped off

the stocks are better... a lot

Tv motorcycle 😊oven infront

The D.O.T. requires that the tail lights are flush or past the saddlebags. I kinda like them so I'm leaving mine on. Like your channel so I officially SUBSCRIBED.

Stock looked better bro. I will change my CVO st lights

Why would you buy a new bike and then put all kind of new crap on it😂😂😂😂 just seems stupid to me

Stock looks better waste of money. Thats why harley put them there. Was paying attention to there customers. That change is not needed anymore

Looks horrible. Sorry to say

Personally i think you starting to make some bad decisions, just to make content. How do you sleep at night, knowing those holes are there in the fender.

Looks horrible. The lights sit so far back a car driver can only see you if they are directly behind you. Are you new to baggers? The rule of thumb is more lighting so idiots in cars can see you. You just made your bike invisible from any angle. Return them. Stock looked better and is safer. Shame on CD for even making such crap. Somebody will get hurt and they will sue them and most likely win. Plus look at the damage it leaves after install. Horrible product.