@OCDKV Жыл бұрын
Thank You! I'm brand new to this and tried to print an ornament in vase mode and had nothing but problems. This fixed it! Definitely earned a new sub.
@CallumColes Жыл бұрын
Glad it helped! Appreciate the comment
@rctrix9063 Жыл бұрын
If it isn't broken don't fix it, this is the lesson I have learned over and over. If you have unreliable power, buy a UPS.
@CallumColes Жыл бұрын
You’re not wrong, I am yet to see a power loss recovery solution actually work reliably.
@lufebr Жыл бұрын
You saved my day!
@paimond223 Жыл бұрын
You rock. I had this issue. This fixed it. Might also have to do with a cheap/terribly MicroSD card btw.
@CallumColes Жыл бұрын
Pleased to hear it! Yeah cheap MicroSDs can play their part, especially in conjunction with a slow controller board...
@lufebr Жыл бұрын
you saved my day!
@CallumColes Жыл бұрын
Pleased to hear it, cheers for the comment:)
@Happy3dprinting 2 жыл бұрын
Great video Callum, I never had a problem with “zits” on my ender 3 s1 but all of a sudden they started appearing when printing from the sdcard, turned out to be a faulty card. Like everything there’s never one answer. Just bought an new Ender 5 Plus as a build/upgrade platform and with the big build volume of this printer, is there an update on 2kg spools of your pla range?
@CallumColes 2 жыл бұрын
Yes SD cards can play a big role, I've had to replace many over the years! Trouble is, it's never the first thing you think of when you start having problems. Even in the case of these printers, a higher quality SD card would have no doubt improved the situation. 2kg rolls are now live! They've been ready for a while actually, but was planning on announcing them in the newsletter, which I'll send out tomorrow now. So anyway, you're the first to know :D
@bdunni88 6 ай бұрын
Does the Sunlu S8 Pro have the ability to turn off Powerloss recovery or is it the same as the non-pro version?
@CallumColes 6 ай бұрын
I’m not sure! But there’s always the option to flash new firmware if the gcode command doesn’t work
@WayneKo Жыл бұрын
How do I update the firmware on the longer 5 pro
@CallumColes Жыл бұрын
Longer have an article that may help here: www.longer3d.com/blogs/news/longer-lk4-pro-lk5-pro-3d-printer-firmware-update Alternatively, if you feel like installing a custom Marlin firmware with the power loss recovery turned off, this video should be helpful for you: kzfaq.info/get/bejne/m9ePrMqnrayWaX0.html&ab_channel=TeachingTech
@breadface3665 Жыл бұрын
Hi can you turn this feature off using pronterface?
@CallumColes Жыл бұрын
Worth a try! But it didn't work on mine when I tried
3D Maker Noob
Рет қаралды 126 М.
Ricky Impey
Рет қаралды 366 М.