Never been so scared watching someone use a table saw before - literally on the edge of my seat !

what was up with the music it sounded like it was jumping

The Music was making my cancer come back! I think I felt it growing inside my bladder while I watched..... BTW my bladder may be partially gone but I can't believe you still have your fingers!

This is just what I was looking for! I was trying to figure out how to do the frame for the desk I’m building with my hardwood floor leftovers and this is perfect. Thank you.

Wouldnt put much on it without some serious supports...

Very nice desk. I did something very similar. I made sure to run 3” lags through the desk support and into each stud to keep it from flexing.

What happen to the music?

great desk good idea to use the flooring thanks for sharing

I think i would have added more support, I know the defeats the purpose of a floating desk but it looked a little flimsy to me when you were pressing on it.

Need a gripper for the table saw and that kind of material.

Quick tip: i work on hardwood floors and if you want a nice jagged edge floor handscrape using the direction of the wood then sand it with 120 grit sandpaper

Good idea, but probably put it in a corner where you can get some lags into the side wall as well. Looked like it's gonna be a bouncy table the way it sits.

Nice concept. Nice execution. Only advice. Do yourself a favor and replace your saw blades, or at the very least, get some liquid laundry detergent and soak your blades in a diluted mixture and take a brush to it. It will lessen the blade burn on your material.

Love it. Any chance to make this type of table height adjustable?

Really awesome 👍

It looks like a fashionable coffee shop:D!!!

Awesome tutorial! Your CD player had a Milli Vanilli malfunction though

That desk flexed a lot just with the little bit you pushed down on it. Try again.

When welding, Personally I think you should just go straight slowly while watching your pool size behind you rather than doing small circles along the weld to create a stronger bond unless you're using TIG. I used to use the same technique then later got corrected by an instructor that they may look nice, but they're not that secure. I thought I would pass along the message. :)

Congrats on being selected as the new lucky KZfaq recommendation.

+1 needs support +1 table saw usage poor +1 music was baaaad

Between the music and your safety with power tools, I was expecting a Volkswagen Bug to pull up and 20 clowns to come out of it...

wow! I didn"t believe the wall can spare the table!

Professional!! Where did you get the frame/bracket that went under the counter from?

Is that support sturdy enough? I'm gonna build a long desk hanging on the wall, but I have trouble finding something strong enough. I think it's too much lever force for something that elegant.

aesthetic - 60% stability -10% laptop - 30%

The way you used that table saw is scary. That's an easy way to lose your fingers.

Congratulations. Great job, I'm from Brazil and I liked your service.

Might want to get a new blade for your saw

Hello garden buildings would be great new projects !

Everyone acting like they are going to hold a weight lifting contest on top of that desk...

1:15 Up cycling: like when your table saw kicks your work piece up into your face?

I waaant 😭 Wish I can make this myself

I think you can learn more about it on woodprix.

Anxiety 101 looking at that table saw usage my dude

Cool idea to use hardwood flooring for the desktop! Music is very distracting to be honest. Was it supposed to be a cool mix or something?

Fan of the channel. One quick question...how deep is this desk and do you wish now it was more or less? I'm planning out a desk build of my own and trying to determine some dimensions. Any insight you could give would be appreciated.

Nice job,.. but I think wooden support it is other original way to do it. How could you make it a resistant wooden one? Same way?

Very well done again! Inspiring! You have a lot of tools! Nice

You need to get yourself a hot young MicroJig.

2020 please tell us did the desk bend?

wtf was that? No support except for frame screwed to the wall? Don't try this at home folks. Put any more weight than a pair of laptops and a couple of books and you'll be ripping out the wall.

How is that being help up by 2 screws??

How much hand planing did you have to do?

Nice table, but why did you want to glue it? You could screw it to metal frame without any visible holes on the surface(drill the counter half way)

What kind of screws do you use to hold the frame to the wall?

People are watching a video on a FLOATING desk saying it looks like it needs more support 😂😂😂😂

Came here looking for ideas for my own diy desk. First saw you raise the the saw blade with it on and said this guy is dumb to be doing something so unsafe. Then saw you cut metal beams and weld and definitely gave up on your design as a diy project

didnt want to give him credit so a black bubble will do hahah

I’m not the safest guy on a table saw but damn my fingers were having phantom pains watching this, but in all honesty great work. Safety is no ones job but yours. Keep up the good work.

Why did he cut off the tongue and groove from the flooring pieces? I would’ve thought that you could still do a glue up with the tongue and groove in there

I used that song in one of my videos, but it wasn't jumping around like that. Cool video.

how much weight can they hold?

Will the frame works if it's made with wood??

What are the chances the weight would eventually break the wall and come right off? There's no brackets or anything supporting the table. I'm thinking of making similar table but with brackets as support.. I'd prefer floating desk like the way you made it, but I think it's risky? Would love to hear your take on it as you're the expert. And how much did this cost you to do?

Looks great... does not look secure. Also as others have mentioned... watching you use the table saw was intense. Please be careful...

Liked the way you tried to bring your initial idea to fruition. But there's a few things that were both scary, and things I would have definitely done differently. Idea is nice. Execution, not so much. A bit of a voice over or something would've been nice to hear what you're doing as well instead of the really crappy music. And while the end product looks okay, I'd be scared to use it. Doesn't seem like it's able to support a whole lot of weight. The computer and such might be fine, but adding a bit more and I'd be afraid to rip out the wall. (Say someone would try to sit on it.) The steel frame is nice, but doesn't add much here, it seems.

Love your channel but wtf was up with the music at the beginning

WHERE IS YOUR RIVING KNIFE 👏👏👏👏

Excellent job but not very practically for the average DYI weekend guy or gal. How many of us can weld steel into a frame like this? If you would have simply built your desk out one more feet on both ends you could have used those side walls for structural support and still keep the floating appearance.

How come you didn't show any weight being added to the table?

for safety sake anyone watching this video who isn't a wood worker, maybe if you're just a starting diyer please dont make table cut saws with no riving knife especially when you're ripping. Kickback is a real thing, and the riving knife prevents that, his saw has a slot for one he just pulled it out probably because he wasn't using the correct push sticks.

8:27

@8:16 lol censored

You were lucky to avoid 3 kickbacks.

Have you ever used a table saw before?

Great video but I had to watch it on mute.

Would be a pretty good video if you narrated it. Not sure why a DIY video would just have music.

Great idea, too bad you have paper walls :S

The video is really good, but the music is just terrible

Music is all messed up in this video

The music made this video really painful to watch. Didn’t want to mute it because I wasn’t sure whether or not you would be doing any talking. 😬Thanks for sharing though. 💫

Broken "music"

Nice video! But awful music.. my gosh, I had to mute it.

good table but music made me lose braincells and wish to be deaf

My god! Can't watch the rest of this! The music is horrible!

It will sag.

Doenst seem to be able to carry real computerstuff instead of some medium books..........

Well that was hard to watch... and to listen.

I really enjoy plans from woodprix.

That looks really flimsy

Video great music not great

literally can't watch you use a table saw

Jesus that music hurts brains, its horrific.

Design looks good, but it doest look sturdy.

I'm sure the desk turned out great but the music drove me to quit the video early...sorry.

Great video but for the love of god, that music is awful. The fact the beats don’t match gives me huge anxiety lol. Every single song has this missed beat effect throughout the whole song. 😵

quick question .... how often you have to repair your ripped wall after the install? I mean dudddeeee . I am no expert in woodworking but this floating desk is complete nonsense . And yes I mean complete nonsense . I have seen some of your other videos and you do good work but dayyyym. This is disaster waiting to happen . Good luck my man !

Honestly, I had to mute this entire video. It was so annoying. The rest was ok

I made it with Woodglut plans!

worst music ever.....

That song is so annoying I'd rather it was just you swearing at the bip bop not going I to the snug flop first time

The most annoying so called music I've ever heard

This music is fucking terrible..

Please stop with the ridiculous music it really puts me off watching

Your buddy looked like coward.

Sorry but this music sucks. I feel like I'm on 56k internet.

Love the project, disliked the video... music was terribly edited.... if your using so many songs then add some of you explaining what your doing over the music or make your video shorter

Stupid desgn and construction. Drop a paper clip on that and the thing would collapse.