FlossTube: NIAH - Needle Threaders

Рет қаралды 18,916

6 жыл бұрын

Having trouble threading your needles, we've got solutions!
You'll find threaders in our online catalog or give us a call
www.needlestack.com/WebStore/A...
Toll-Free 1-877-HAYSTAC (877-429-7822)
www.needlestack.com

Пікірлер: 22

@marilynkelley3707 4 жыл бұрын

Received my LORAN-type threaders today and was cutting every piece of thread I tried. I found your video and can now use my threaders! The rocking motion was the secret. Thank you so much! Another tip, be sure your needle eye is the correct size. I was using a needle to test all my threaders and the eye was too small. It was a size 26; but the eye was not cut correctly and was cutting my thread. I changed needles and all of my threaders are working for me. Just be aware if you needle slides easily on the threader. Hope this makes sense!

@artysplash5969 3 жыл бұрын

Thank you so much for showing how to use this tool! That was a huge help! 💓 I never used it and suddenly got it together with my embroidery kit. So this video really helped me!!! 🥰

@italis2542 2 жыл бұрын

Never knew there were so many threaders, WOW!!

@kaeci. 3 жыл бұрын

Very helpful. Thank you so much! I'm new to cross stitching.. The hobby I picked up during lockdown 😄 Everyone stay safe.

@carolyncrandall710 6 жыл бұрын

Thanks for taking the time to make this great video. I love my Puffin threaders....both the regular and micro one !!

@sonicsophie 2 жыл бұрын

Thank you! I just received a muriel threader and this tutorial was perfect!

@HelloHello-hk4sx 3 жыл бұрын

I just ordered the 3rd (loran iran) threader! 🙂 Can't wait to get it!!

@suemarshall5116 5 жыл бұрын

Your video was a huge help! thanks!

@mayolson2 6 жыл бұрын

Thank you!

@alexandravlasin5319 4 жыл бұрын

So helpful, thank you !!

@patriciaroberts2250 5 жыл бұрын

I used the LoRan needle threader for years but now it is causing the thread to break tnthe bend. Perhaps the lighter ones are the cause of this problem, or the inside of the "hook" becomes sharp. I have now switched to the Dritz which is the thin wire but in a plastic housing.

@rhondahelfand6089 3 жыл бұрын

i trying loran w size 24,needle but i have difficulty getting needle back off and even up and down it also bends

@jeannereed460 4 жыл бұрын

Can this be used with regular sewing needles

@nevadastitcher 6 жыл бұрын

I love the Loran threaders and have used them for years. I recently purchased a spare one from HL and found ut thinner metal that does not want to stick to magnets. 😫

@catheray8741 6 жыл бұрын

Barbara - we got a new batch of the LoRan threaders in a week ago and discovered the same thing. I asked our distributor to complain to LoRan. I did find that if I put two of them together they would hold to the magnet. So their redesign to use thinner steel isn't ideal, and hopefully they will still hold to a lot of use. I'm assuming the thinner steel is to cut costs and I suspect they didn't even consider that stitchers use them with magnets.

@twentynineteen4687 4 жыл бұрын

I used to love these but my recently purchased ones have very rough edges that keep snagging/fraying my floss.

@mirandadavis2730 3 жыл бұрын

THANKS I BOUGHT THE WRONG NEEDLE SIZE. I NEARLY WENT CRAZY ON HOW TO TREAD THE NEEDLE. THANKS👍👍👍😦

@weeksd2903 3 жыл бұрын

What about quilting needles sizes 3-9?

@catheray8741 3 жыл бұрын

As we don’t carry quilting needles so it’s outside my knowledge base. You might ask at an independent quilting shop what they recommend.

@nellmcrae7828 3 жыл бұрын

I need one with a right angle so I can thread my sewing machine

@NeedleInAHaystack 3 жыл бұрын

We only sell to people who do hand stitching so machine threaders are outside of our area of expertise. You might ask a quilt shop for a recommendation.