Рет қаралды 6,111
► Buy me a coffee if I helped you with this video! www.buymeacoffee.com/wilsbuilds1
On this episode of the Miata build we will finally be reinstalling my Flyin’ Miata Turbo Kit. I originally took off my turbo kit because I had a large oil leak coming from my oil drain tube. I found many more issues while taking off the turbo kit and decided to give it a full restoration.
Here are some of the issues I addressed with the restoration.
Ceramic coated my turbo manifold and down pipe
New studs for the manifold and down pipe + Locking Hardware
New oil feed and drain lines. Added water lines.
New turbo to intercooler pipe
New turbo hose clamps
New Blow Off Valve
New Air Filter
I can finally move onto other smaller projects on the Miata now that my turbo is installed again.
One step closer to hitting the dyno and getting my Miata on the road again!
Hope you enjoyed the video!
Links
Flyin Miata Stage 1 turbo system for NA8 chassis - flyinmiata.com/products/stage...
For more in depth install check out the Flyin’ Miata Turbo Install Series.
• NA/NB Stage 1 Turbo In...
Hose Cutter - amzn.to/3MEomNX
Hose Removal Tool -amzn.to/3MCG30o
Vibrant Turbo Hose Clamps - amzn.to/3MzxRhe
Vacuum Line Hoses - amzn.to/3FTcROY
Exhaust Bolts - amzn.to/3MCbW9l
Exhaust Gasket 2.5” - amzn.to/49otUWJ
Permatex High Temp Thread Sealant - amzn.to/3stXKZ7
Permatex Ultra Black RTV - amzn.to/474zGeh
Tekton Torque Wrench - amzn.to/3sxpD2o
Makita Impact Driver - amzn.to/3SS0MkX
Test Pipe - www.unequalfabrication.com/
0:00 Preview
1:30 Parts Overview
3:34 Turbo & Manifold Assembly
8:52 Oil & Water Line to Turbo
13:00 Turbo to Head
15:40 Oil & Water to Engine
18:43 Intercooler & Piping
21:03 Blow Off Valve
21:56 Vacuum Lines
22:51 Down Pipe
23:34 Test Pipe
25:37 Outro