Wils_Builds

Пікірлер

@Hakan_Derin 6 күн бұрын

It's annoying that to be able to replace the mirror you have to disassemble the door panels.

@wils_builds 6 күн бұрын

@@Hakan_Derin seriously way too much work for a mirror haha

@stegoooo 11 күн бұрын

Do your steering wheel controls still work?

@wils_builds 11 күн бұрын

My 4Runner doesn’t have steering wheel controls.

@samuelg3586 17 күн бұрын

Hell yeah!

@wils_builds 14 күн бұрын

Thanks!

@wingrider1004 17 күн бұрын

Excellent video.

@wils_builds 14 күн бұрын

Thanks!

@Jordan_harris721 23 күн бұрын

Im curious how well that UV protection you used has held up? Is the lens still in great shape?

@wils_builds 22 күн бұрын

Yeah the lenses are still in good shape. Still look pretty much new after 2 years

@jondozi 24 күн бұрын

Will this work to take the crank bolt off as well? I have an automatic so I can’t put it in 5th gear.

@wils_builds 24 күн бұрын

It should work to take the crank bolt out as well. I did test it off camera and was able to take off to bolt after torquing it

@unequal_fabrication 28 күн бұрын

Yooo dope test pipe! Haha Appreciate the shout-out 🙌 Had someone email me saying they found me through one of your videos 👌 Keep up the good work!

@wils_builds 28 күн бұрын

The test pipe is definitely a sweet piece! Great job on the welds and it fit up perfectly! Look forward to see the parts you produce for Miata’s in future 🤙

@jmicaha2655 Ай бұрын

Bruh, how loose does that bottom long bolt have to be? I can barely get my socket back on and the alternator still doesn't want to come out LoL

@wils_builds Ай бұрын

I took the bolt all the way out when I did it

@bobbobert8218 Ай бұрын

Thanks

@wils_builds 14 күн бұрын

👍

@mattimerlatimer2479 Ай бұрын

I ordered the same one and mine didn't come with the middle part of the grille that says Toyota. Do the ship it separately or did I get scammed?

@wils_builds Ай бұрын

You should contact the seller. Mine came with eh Toyota emblem when I ordered

@raulzamaniego2457 Ай бұрын

This video helped me last night get home from a big trip thank you! But now I have it on I get a big squeak/screech when I first turn it on. What can cause that?

@wils_builds Ай бұрын

Glad this video helped you! The squeak could be caused by a dry belt. Not sure how to fix that but definitely check the tension on the belt and possibly add some lubrication to the belt.

@raulzamaniego2457 Ай бұрын

@@wils_builds well for one thing I’m confused on how far does the tensioner bolt need to be in?

@wils_builds Ай бұрын

@@raulzamaniego2457 there’s no specific distance it needs to be tightened. Just enough to where the belt is tight and no slack. A trick I’ve seen is spraying the belt with WD 40. You could try that

@bobbyedwards1515 Ай бұрын

Will the USB plug charge your phone

@wils_builds Ай бұрын

Yeah it charges it. But super slowly. It’s mainly just to connect for Apple car play

@fam4sta611 Ай бұрын

I bought that Cobalt kit when they first came out and I've been happy with it. For some reason it says its 94-05 but it worked perfectly fine for my 1993 1.6 lol (If I were to guess it's because they don't want it to compete with the kit they sell specifically for 1.6 from IL motorsports). I originally also started with the GM hose but after getting inter-cooler piping, I budged and got the Cobalt hose and had less clearance issues

@wils_builds Ай бұрын

Nice. I ended up modifying the hose by adding another that bends 90 and connects to the GM hose with a barb fitting. Looks pretty much like the cobalt hose they sell. Had to do it for better fitment with the IC piping

@baderb8844 Ай бұрын

i recently bought an nb and the hearter core pipes were just exposed and i was so confused what they did and why there were exposed. i was also confused why i had no heat and why it kept fogging up in the cabin. this vid just answered all my questions. whatta beast

@wils_builds Ай бұрын

Glad this video helped you figure that out. I think the heater core may have been leaking on yours to the previous owner probably bypassed it

@yohanlerymartinez7722 Ай бұрын

Perfect me sirvió

@wils_builds Ай бұрын

Thabks!

@hannahhancock850 Ай бұрын

Hey man, awesome video! How are these looking after a little over a year and a half? I want to upgrade mine this summer and want to see how they hold up.

@wils_builds Ай бұрын

Yo, thanks for watching! I’ll make a follow up video soon about the headlights. So far they’ve help up really well. Still look new, no moisture in the lenses, and the LED strips still working

@magicwaffl3z 2 ай бұрын

Hey dude, I'm finally installing this bar and am stuck on the inboard mounting point for the seat belt where you drill the hole. I drilled a hole but the stock bolt doesn't thread in. Did you have to use a thread tapper to get it to screw in? I'm a noob to this stuff so probably a dumb question lmao any help is appreciated

@wils_builds 2 ай бұрын

Hey dude, glad to try to help. Are you talking about the bolt that goes into the seat belt mount? Or the 3 holes you have to drill?

@magicwaffl3z 2 ай бұрын

@@wils_builds for the seat belt mount!

@magicwaffl3z 2 ай бұрын

The one you gotta drill inwards since you're not using the outer position anymore

@wils_builds 2 ай бұрын

@@magicwaffl3z I didn’t have to drill anything for the seatbelt mount. There was already and existing threaded hole when I installed my seatbelt

@magicwaffl3z 2 ай бұрын

@@wils_builds I'm referencing the hole you made at 10:48

@jakedougherty6000 2 ай бұрын

You actually do not need to weld the uppercontrol arm balljoint when replacing it on a stock arm. It depends on who you bought it from, but the ones from Supermiata/949 do not need anything special. Just use the c clip that it comes with, just got mone done

@wils_builds 2 ай бұрын

Yeah it’s not necessary to weld it but many do for extra insurance since the hole can expand when pressing out an old ball joint. I’m sure just a c clip would probably be fine though

@sandeeppatel2627 2 ай бұрын

just what I needed!!. cheers

@wils_builds 2 ай бұрын

Awesome! Glad it helped you

@tung973 2 ай бұрын

Nice one! Will you also rebuild rear suspension?

@wils_builds 2 ай бұрын

I probably will eventually 🤙

@ryanc0017 2 ай бұрын

Great video! On question I have is does the CarPlay sync through the USB or Bluetooth?

@wils_builds 2 ай бұрын

It’s synced through USB

@ryanc0017 2 ай бұрын

Awesome, thank you for the quick response!

@wils_builds 2 ай бұрын

@@ryanc0017 I think there are Bluetooth adapters you can add that plug into the USB. So that’s an option too

@mamadiev2852 2 ай бұрын

What about ald wans?

@wils_builds 2 ай бұрын

They’re sitting in my shelf

@petertarantelli 2 ай бұрын

Nice job man.

@wils_builds 2 ай бұрын

Thanks!

@kevinsaeed9817 2 ай бұрын

Is the tap cutting new threads or used to clean up the existing threads?

@wils_builds 2 ай бұрын

Just used to clean up the existing thread

@kevinsaeed9817 2 ай бұрын

@@wils_builds thanks for making this video, it’s very helpful and I’ll be replacing mine using this as a guide!

@jwell1862 2 ай бұрын

Thank you!!

@wils_builds 2 ай бұрын

Your welcome 🤙

@ac2987 2 ай бұрын

Did you do this with the coolant reroute installed?

@wils_builds 2 ай бұрын

Yes this was with a coolant re route. It can also be done without a coolant re route as well.

@ac2987 2 ай бұрын

@@wils_builds thanks 🙏

@nathanhathcock7049 2 ай бұрын

Just skipping over how to set the camber bolts on the lower control arm.

@wils_builds 2 ай бұрын

I did not set camber and caster since I’m going to get it professionally aligned. But for those that are wondering. I made a mark on the subframe and used the mark to put alignment back to where it was set before the install.

@sagegold6337 2 ай бұрын

I have 2006 v8 4Runner and I have these exact headlights but one plug to turn of the blinker and the led bar does not fit in the plug, it’s too small. Do you know how I can get an adapter for it? And or what size it is?

@wils_builds 2 ай бұрын

Hmmm not sure. Maybe try to consult the FB groups or forums. Someone might be able to help.

@user-cq2jq7pi3b 3 ай бұрын

What size socket was it

@wils_builds 3 ай бұрын

10mm

@mariositladeen5241 3 ай бұрын

What size lift

@wils_builds 3 ай бұрын

2.75 front, 2 inch rear

@bodhivanbrussel 3 ай бұрын

Is it the same on a Na and Nb?

@wils_builds 3 ай бұрын

I believe it should be the same. The NB have different lower control arms. But definitely do your own research to confirm 👍

@jackkil1508 3 ай бұрын

Nice video! Thank you,

@wils_builds 2 ай бұрын

Glad you liked it!

@bogdanceltarebs 3 ай бұрын

very helpful! thank you sir!

@wils_builds 3 ай бұрын

Glad it helped you!

@user-qt8tp8ex1c 3 ай бұрын

Fuse Box side meror

@wils_builds 2 ай бұрын

@montymole6002 3 ай бұрын

How much did this cost? Minus the LCA’s, looking into rebuilding my NA

@wils_builds 3 ай бұрын

About 250 each side without the lowers and about 500 total. If you include the lowers, ball joint, and lower bushings then it was about 750

@magicwaffl3z 3 ай бұрын

I'm considering getting one of these for my miata, I found one for a good deal near me. My only concern is visibility out of the back window. Does it impact the visibility for you a lot? I am pretty short for reference (5'4) so I'm wondering how bad it is. It's between this or a hard dog m2. Love the vid!

@wils_builds 3 ай бұрын

I haven’t driven it but I have sat in it and the visibility is still good. The X does cover the lower edge of visibility if you have a hard top but you can still see out of most of it

@magicwaffl3z 3 ай бұрын

@@wils_builds thanks!!!

@project_ij 3 ай бұрын

quick and no bs, very nice

@wils_builds 3 ай бұрын

Thanks!

@gavinkillzemgaming2012 3 ай бұрын

Did the headlight come with LED bulbs or are there any good brands you can recommend

@wils_builds 3 ай бұрын

I bought the LED bulbs separately. There are links in the video description

@amosbouyeriii1095 3 ай бұрын

Nice video you did a wonderful job explaining exactly what to do, now I'm about to go outside and replace my side mirror on my 08 Honda fit

@wils_builds 3 ай бұрын

I’m glad my video helped! Hope the install goes smoothly for you

@themadisonjt9108 4 ай бұрын

they wanted to charge me $1300 for this. thanks

@wils_builds 4 ай бұрын

That’s insane! Hope this video helps you save some money!

@penialdelicatesance 4 ай бұрын

are you using an impact drill or impact wrench

@wils_builds 4 ай бұрын

I’m using an impact wrench

@user-eo5rb7mq6n 4 ай бұрын

When removing the upper control arm bolt once you couldn’t hammer it anymore what did you use to continue extracting the bolt?

@wils_builds 4 ай бұрын

I just kept turning the bolt counter clockwise until it fully came out. It took a while. Probably 15 mins. Couldn’t fit my impact in there so had to do it by hand. Really pain

@user-eo5rb7mq6n 4 ай бұрын

Tell me about it was having trouble until I stumbled across your video appreciate the help

@wils_builds 4 ай бұрын

@@user-eo5rb7mq6n no worries dude 🤙 glad it helped and hope your install goes well

@Buzz65 4 ай бұрын

Well done. Great descriptions of parts used, etec. I just purchased the FM turbo kit w/coolant re-route and the crossflow w/v2 brushless. Videos like yours are so helpful in what to expect. Sub'd.

@wils_builds 4 ай бұрын

Glad you enjoyed the video! I hope the install goes good for you dude!

@Portcitysteezy 4 ай бұрын

What size double din ?

@wils_builds 4 ай бұрын

Yes double din

@mael_snhz1233 4 ай бұрын

Thanks for the link in the description, is it for the 1.6 or 1.8 or both ?

@wils_builds 4 ай бұрын

Not 100% sure but I think it works for both 1.6 & 1.8. You should email moss Miata to check

@andersont.2267 4 ай бұрын

Nice video man. This helps a lot. Immediately makes the interior look more modern and clean. I’m about to install my alpine in my 2011 Rav.

@wils_builds 4 ай бұрын

Thanks! Glad you found the video helpful! ☺️

@magicwaffl3z 4 ай бұрын

Such a great video man, I'm gonna have to do this eventually on my nb

@wils_builds 4 ай бұрын

Good luck on the refresh! Very satisfying once it’s dobe

@airsoftak1994 4 ай бұрын

Great video. How do you like those IL motorsport bushes?

@wils_builds 4 ай бұрын

Haven’t been able to try them yet. The car is still on jackstands while I finish up a few things before going to the dyno. Progress has been slow lately since it’s really cold outside

@homer4163 4 ай бұрын

I got a little concerned when he was cranking the engine with the air filter still wrapped in plastic. Glad it was removed later.

@wils_builds 4 ай бұрын

Hahah yeah got way to excited to finally start it up 😅

@homer4163 4 ай бұрын

Great video! Excellent camera work and narration. Do you have the part number for the stage8 turbo studs? Seems like the package in the video are for the locking nuts only, not the studs.

@wils_builds 4 ай бұрын

I don’t have the part number but you can find them on the Flyin Miata site. You can also email them and they’ll help you out.

Ең жақсы KZfaq

Пікірлер