Flyin' Miata NA Miata Sway Bar Install

Рет қаралды 8,622

Күн бұрын

Sway Bars are our number #1 recommended mod for every Miata, and in this video our resident Miata Master Mechanic, Kyle Tigar, shows you step by step how to install them in your NA/NB Miata.
Looking for how to install sway bars on your ND Miata? We have a video for that too!
• ND MX-5 Flyin' Miata S...
We offer sway bars for all generations! Check the link below for Sway Bars for your specific Miata, and be sure to see our other installation videos on our channel.
FM NA6 Sway Bars
flyinmiata.com/products/1990-...
FM NA8 Sway Bars
flyinmiata.com/products/na8-f...
FM NB Sway Bars
flyinmiata.com/products/flyin...
FM NC Sway Bars
flyinmiata.com/products/nc-fl...
FM ND Sway Bars
flyinmiata.com/products/nd-fl...
Looking for more Miata videos? Subscribe to our KZfaq channel to make sure not to miss any of our Miata content!
Flyin' Miata is the world leader in Miata performance. We offer a wide range of parts for all years of the Mazda MX-5 Miata.
www.flyinmiata.com
970-464-5600 • support@flyinmiata.com
Instagram:
/ flyinmiata
Facebook:
/ flyinmiata
Twitter:
/ flyinmiata
#NA #swaybar #install #instructions #guide #stepbystep #howto #DIY #NA #NB #Mazda #Miata #parts #mod #upgrade #FM #KyleTigar #suspension #performance #FlyinMiata

Пікірлер: 29

@biglar155 Жыл бұрын

I just did this on my 2000 (NB1) three weeks ago. I can tell you there is not enough PB Blaster in Heaven or on Earth to get those end links off of a 23 year old midwest driven car. Part of the problem is that, on a 2000 (actually anything not an NA I think), there is no hex-head bolt on the stud to put a wrench on. You have to hold it with an Allen Key on the "working" end - so you can't get a socket on it and hold it at the same time. The nuts are so frozen on, you wind up stripping out the allen slot inside of the stud. I was lucky to have a set of locking pliers skinny enough to grab hold of the stud. With hardly any room to maneuver a tool, it was a fight the whole way. To anyone about to do this job on an older model: Save the time and get yourself replacement end-links before you start. I was up on stands for a few days waiting for mine to arrive when I could have been enjoying my new sway bars (which are pretty darn awesome).

@Slickasv 12 күн бұрын

Jeez

@rjjohnson3807 Жыл бұрын

Installed these on my 97 with 97k on it and I noticed a difference in the turn in and a little bit more in the rear stiffness honestly really like how it rides and I’m still on stock suspension but I’ve done 15x8s on some 205/50r15s and it really makes the cars stance and road handling more enjoyable than ever

@Tomnuki Жыл бұрын

Loving these installation videos! Hoping to see more in the future.

@FlyinMiataVideo Жыл бұрын

Thanks! We've got quite a few more coming up soon!

@nolahahnshouse3389 Жыл бұрын

I have eibach front and rear’s and I’ve loved them from day one

@philjones5728 Жыл бұрын

Great video Kyle. You make it all look simple and easy to follow. 10/10. I've already upgrade my ARB's and it made a huge different to the turn-in and overall handling. Probably the best mod for your money IMO.

@FlyinMiataVideo Жыл бұрын

Thanks! Sway bars are one of our favorite mods for any Miata!

@michaelh.9866 Жыл бұрын

Thanks, Kyle!

@brianrobinson7972 Жыл бұрын

Well done!!

@lasvegascrisis 7 күн бұрын

thank you!!

@rayenie8964 6 ай бұрын

Great video. Would you recommend upgrading the end-links as well?

@FlyinMiataVideo 6 ай бұрын

For a street car, at our recommended ride height, you won't see much benefit running adjustable end links but if yours are on their way out, why not.

@Jonathan-pt4fr Жыл бұрын

I currently installed your sway bars. The right endlink sits flush with the bar but the left side endlink has a decent gap. The endlinks are a oem type of replacement. I’m also lowers on tein coilovers.

@FlyinMiataVideo Жыл бұрын

If you can, reach out to our support team directly with pictures and more details at support@flyinmiata.com , and we'll be happy to try and help.

@Mr.Spectaculous Жыл бұрын

I just bought a mint 2000 Miata (NB) with 60K on the clock. You have the best content so far. Can you tell me if there is a shop in Pinellas County Florida you are sending parts to? I'd like to find a tuner for the car.

@FlyinMiataVideo Жыл бұрын

Give our support team a call or email directly. They can probably point you to a shop in your area. Thanks!

@GR44N 11 ай бұрын

NB1 Not NB

@jeffel1302 Жыл бұрын

Great video Kyle. Can you give me your subjective opinion on how much (?) of a difference these sway bars might make on a 2001 Miata with very low miles? Thanks

@FlyinMiataVideo Жыл бұрын

We've got several videos on the benefits of Sway Bars! For basic info, check out this recent vid from Keith: kzfaq.info/get/bejne/rdyhqpCXmcrMnHU.html For more of a deep dive into the tech and theory, we recommend this one: kzfaq.info/get/bejne/pb-RoqeYsqnRpJc.html

@yourpalsphinx8343 11 ай бұрын

What would be the torque specs by anychance

@38tech Жыл бұрын

Great vid, but you should.have taken the opportunity to do it with the adjustable endlinks. Oh and just full send on the front bar. Tweak the camber and boom.

@FlyinMiataVideo Жыл бұрын

Thanks! On this car, the owner didn't need the adjustable end links since the car wasn't lowered. We have an end link specific video coming up soon! Thanks for the suggestion!

@user-uw1sx3xt1e 3 ай бұрын

What did we do before we had power-wrenches for every application ( we used hand tools ) !

@FlyinMiataVideo 3 ай бұрын

We complained more😁

@dha588 24 күн бұрын

Are the na and nb sway bars interchangeable?

@FlyinMiataVideo 23 күн бұрын

Not really. That's why we offer different parts for the NA6, NA8, and NB.

@TheJackShack 4 ай бұрын

What are the torque specs?

@FlyinMiataVideo 4 ай бұрын

@TheJackShack Torque specs can be found in our instructions for these sway bars (s3.us-west-1.amazonaws.com/instructions.flyinmiata/suspension/swaybars.pdf) or in the factory service manual.