FoMaKo new released KC608 Pro PTZ camera controller with 3" LCD, easy setup.Perfectly for multi-cameras system. More easier and professional to operate NDI HDMI PTZ camera
Пікірлер: 142
@dulce__maaria8 ай бұрын
simples e perfeito, obrigado pela explicação, abraços do brasil
@fomako97788 ай бұрын
Welcome, friend!
@ADELLYASTUDIOHD10 ай бұрын
Mantap
@angahdeden8 ай бұрын
😮wow
@porteouvertereims9 ай бұрын
I tried to connect the Tenveo VL12U with zowietech controller by VISCA IP (with PoE by switch). I changed the IP's camera but i didnt find the default port.
@fomako97789 ай бұрын
Different brands' camera and controller maybe have compatibility Issues , please choose FoMaKo cameras and controller joystick, our PTZ camera system are optimized
@DestinationWonders9 ай бұрын
Hi I'm looking into purchasing your set up my question is can I buy 3 individual Cameras with Joystic console that will have each person operating separately by 3 people and I will link the shots to decide which one I want to be showing fading from Camera 1 to camera 2 or than camera 3 . ect.
@fomako97789 ай бұрын
Dear Friend, do you want to switch the cameras' video out ? if so, i think you need another device called video switch. The controller joystick only has PTZ control function. please email us for your detail demand, we will give you some suggestions.
@5058532 ай бұрын
I have a Fomako system set up on my church. We use it to stream to FBLive and Zoom via OBS. We are having trouble getting the video and audio to sync on the live stream. Is there a better way to stream using ip camera setup to make sure audio and video sync up?
@fomako97782 ай бұрын
Thanks for ordering FoMaKo PTZ camera system. for the sync problem, please check OBS Audio mixer , to set the sync offset.
@user-cl2ed5iz2d7 ай бұрын
If I do not have internet connection, do I need the router, or am I good to go with the POE, since I am not transferring network from computer. Can I not just connect the camera and controller to a Gigabit Ethernet Switch? Or if I only have one camera, can I not just connect directly to the controller over cat 5 cable? Please help.
@fomako97787 ай бұрын
you can don't use router or network switch, you can use serial port to control the camera such as RS485, RS422. but i'm high recommend to add a router to you system, it will make your PTZ camera System much more easier and cleaner. use Network cable connect camera and controller to the same router, router will assign ip address for camera and controller. and your router doesn't need to connect to internet. For more details, please contact us directly.
@mikeb60069 ай бұрын
Is it possible for that camera to activate when a person speaks? (Activate by voice). Example: Camera 1 is aimed at person A. Camera 2 is aimed at person B. When person A speaks, camera 1 should activate. When person B speaks, camera 2 should activate
@fomako97789 ай бұрын
Dear Friend, currently, the PTZ camera only has AI person/body tracking.Doesn't support AI voice tracking. because voice tracking is not exactly currently, such as distance, voice pickup quality, two more persons speaking, voice tracking speed ...
@mikeb60069 ай бұрын
@@fomako9778 Thank you!
@ryannrjohnson9 ай бұрын
Preview screen worked fine for a couple of days now the preview screen is just blue when I hit preview. Everything else works fine. Any suggestions would be appreciated.
@ryannrjohnson9 ай бұрын
Nevermind somehow I just figured it out, preview screen is back up. I think it had to do with RTSP Authentication then reboot.
@fomako97789 ай бұрын
@@ryannrjohnson that's right, the preview use RTSP streaming, so, you need enable RTSP for the camera.
@paulreed2409Ай бұрын
We bought FoMaKo cam bundle for our church. I hooked it up to the controller and everything works using POE. I was told these were NDI compliant but cannot get them to show up when trying to setup OBS the model of camera is fmk20sdi pro. This is very frustrating, help because can't seem to contact the company
@fomako9778Ай бұрын
Dear Friend, Please confirm your cameras' model ID, FMK20SDI pro, it is no-NDI model; KN20A Pro, it is NDI model, the NDI model cameras printed NDI logo at front of the camera.
@nusamedia8 ай бұрын
I plan to use PTZ to live feed an event by connecting the cameras to a stand alone video switcher. Can it be used without the router and PC..?
@fomako97788 ай бұрын
yes, it is ok. If your video switcher has HDMI or SDI video in , you can use the camera's HDMI/SDI video out to the video switcher. Please note: our 4K camera's HDMI default video out is 4K 60fps, if your video switcher doesn't support 4K 60fps, you should change camera's resolution to 1080P 60fps.
@nusamedia8 ай бұрын
@@fomako9778 Thank you very much. Really appreciate that.
@davidaramide6617 ай бұрын
Do I have to be connected to the internet to make this work. Can I just connect the cameras and controller to a POE switch and be good to go?
@fomako97787 ай бұрын
you don't need connect the system to internet. you can connect all devices to PoE switch directly, but you have to change the devices IP address by manual, if you add a router to the system, router will assign ip address for the devices. And router doesn't need connect to internet.
@mbastosbatera5 ай бұрын
Im having some trouble with the keyboard, after connect the cameras I can’t control them or showing in preview mode
@fomako97784 ай бұрын
please write to us directly, we will help you to find out and fix the problem.
@a3iuuu7 ай бұрын
Are they good in low light condition? What about the sensor? Do you offer discounts to purchase more than one camera?
@fomako97787 ай бұрын
the performance in low light condition is ok.
@fomako97787 ай бұрын
yes, we will give you some discount
@IslandDigital4 ай бұрын
I need a 4 cam system to make multicam videos. What’s easiest equipment , workflow to use ?
@fomako97784 ай бұрын
This video shows how to control the cameras. For live streaming sytem, please check our another video with HDMI video swither added: kzfaq.info/get/bejne/ibZyadtomNW0iGg.html connect all cameras to FoMaK KC601 pro video switcher by HDMI cables, and use KC601 Pro's USB 3.0 video out to your computer. Of course, you can also record the video to HDD. You can also write to us directly, we will give you the detail solutions.
@woleyfaseru8017Ай бұрын
Would you be kind to share setup configuration with YoloBoc Pro
@fomako9778Ай бұрын
Dear Friend, Use HDMI cable connect our cameras to YoloBoc Pro's HDMI-in port is ok.
@TheMrfranko239 ай бұрын
What kind of POE switch works best with the cameras?
@fomako97789 ай бұрын
Please try TP-Link PoE swtich is ok, cheap and works great. The PoE switch in our office works for two more years without any problem.
@kaczuchasly517411 ай бұрын
What is the best quality ptz camera from Fomako?
@fomako977811 ай бұрын
All FoMaKo PTZ cameras' quality and functions are great, if you need the best one, i recommend the FoMaKo K820N, it is our newest 4K 60fps PTZ camera with powerful AI tracking function if you need the cost-effective ones, you can check FMK20SDI, KN20A , our all cameras are upgraded to Pro version (wish LCD screen), much more easier to integrate cameras to your network.
@kaczuchasly517411 ай бұрын
@@fomako9778 how I can order to UK?
@fomako977811 ай бұрын
@@kaczuchasly5174 please go to Amazon UK, search FoMaKo, we have stocks in UK local, thank you very much!
@Henry-by6fj7 ай бұрын
Can these cameras be mounted on a celing ? Does it come with brackets. ?
@fomako97787 ай бұрын
Dear Friend, yes, the two models in the video come with ceiling and wall mounting brackets, you can mount on the ceiling.
@Editor12064 ай бұрын
having a issue with connecting my fomako controller to my fomako ptz cameras. The 3rd. number of the ip address is different than the one on the ptz cameras. how do I fix this?
@fomako97784 ай бұрын
Dear friend, please write to us directly, include the camera's IP address shown on camera's LCD screen, and take photo of controller's device list, we will check and help you to find out the problem.
@EdwardRuiz6 ай бұрын
Hola, he instalado todo con cat6, el controlador ya ve a las cámaras pero no las mueve, su ayuda por favor
@fomako97786 ай бұрын
Dear Friend, please write to us directly, we will try to find out the problem for you.
@kaonashi3D3 ай бұрын
What’s the point of the network router? U have a Poe switcher. There is no need for it for extra stuff
@fomako97783 ай бұрын
router used to assign IP addresses for the devices, if you are professional at network, of course can remove router and do network settings by manual.
@BronsenHartley3 ай бұрын
My auto focus is going crazy, how do I fix it, manual mode won't work either.
@fomako97783 ай бұрын
Dear Friend, please write to us, We'll show you how to correct the focus.
@Kickrocksproductionllc8 ай бұрын
Are these cameras also suitable for podcasting?
@fomako97787 ай бұрын
yes, our cameras are professional for podcasting.
@pablod45366 ай бұрын
Hi I have a question, can I connect an external monitor? Thank you and blessings.
@fomako97785 ай бұрын
Dear Friend, currently, the controller can't connect to an external monitor.
@pablod45365 ай бұрын
@@fomako9778 thanks for answering God bless you
@rickygore93344 ай бұрын
Can you turn off the beep? Each time you press a button it makes a loud beep.
@fomako97784 ай бұрын
yes, please go to controller's "setting-> Beep" to turn on/off, and there are three beep styles to choose.
@TheRosemary06102 ай бұрын
Can this be used for broadcast live streaming
@fomako9778Ай бұрын
each camera has live streaming function. the PTZ camera controller only has PTZ control function. If you need a video switcher with live streaming function, please check FoMaKo KC601 Pro in this video: kzfaq.info/get/bejne/ibZyadtomNW0iGg.html
@laxmankhadka380011 ай бұрын
I want to do it same thing in my Church but no idea plz help me
@fomako977811 ай бұрын
Dear Friend, It is very easy, you just need FoMaKo PTZ cameras, controller joystick, and router, computer, if have more than one cameras, you'd better get a video switch, then your live streaming system setup finished.
@Akoteu4 ай бұрын
Hello for a livestream with this one camera would I need a computer to connect it to?
@fomako97784 ай бұрын
normally, you need a computer to do live streaming , you can also use FoMaKo new released KC601 Pro HDMI video switch&recorder, record the video to U disk, then, you can upload the video at anywhere and anytime.
@Akoteu4 ай бұрын
@@fomako9778 thanks and also in order to save the livestream, I must have the U disk or just the computer?
@tsproav3 ай бұрын
Is the router needed? Is a switch just needed to connect the PTZ cameras to the controller?
@fomako97783 ай бұрын
You'd better get a router in the system. because the router can assign IP addresses for the cameras and controller automatically, It will make installation easier. If don't use router, you have to set the IP address, gateway, subnet mask for cameras, controller and computer, it is a very complex and error prone task.
@tsproav2 ай бұрын
@@fomako9778 Thank you for the reply, any specific router? Just any wireless router?
@fomako97782 ай бұрын
@@tsproav Just use a regular router is ok.
@julelyle3 ай бұрын
Does it capture audio too? Or do I have to run the audio from the mixer directly to my computer?
@fomako97783 ай бұрын
Dear Friend, most PTZ cameras don't have built-in microphone fuction, becausethe PTZ camera will be mounted a little far from the speaker, so, you need use your audio system or external microphone
@julelyle3 ай бұрын
Ok. Thank you
@julelyle3 ай бұрын
Wait, Can I run the audio through there using the "line in"?
@fomako97783 ай бұрын
@@julelyle yes, you can connect your audio system or microphone to camera's line-in. but please note that camera's line-in port doesn't have power function, your audio system or microphone must have power supply or built-in batteries.
@julelyle3 ай бұрын
Ok, thank you for sharing this info with me
@limusikprod30878 ай бұрын
Hi how much it cost the complete setup you are using?
@fomako97788 ай бұрын
it depends on which cameras do you want to use, 1080P or 4K, 20x or 30x optical zoom, if you know how to choose, please contact FoMaKo, We can help you make the decision .
@gabrielasaolu9199 Жыл бұрын
Is it the same settings applicable with only one camera?
@fomako9778 Жыл бұрын
Yes, it is the same too. Just connect camera and controller to the router is ok. Don't need do any settings on computer. Very convenience.
@PoxyBear Жыл бұрын
@@fomako9778 Always best to connect to the network switch instead.
@fomako977811 ай бұрын
@@PoxyBear yes, that's right. cameras connect to switch, switch connect to router. It is the best way. Router is very important, it will assign ip addresses for cameras and PTZ controller automaticly, then, don't need do any settings on computer. Save 20+ steps to setup the system.
@miraclearinze910 Жыл бұрын
Thanks for this. Please does the router need to be connected to the internet.?
@fomako9778 Жыл бұрын
no, router doesn't need to be connected to internet. Router just assign IP address for cameras, Controller and computer, then, you don't need set ip addresses for them one by one, much more eaiser to setup the PTZ camera system
@kaczuchasly517411 ай бұрын
@fomako9778 so only computer can be connected to the Internet?
@fomako977811 ай бұрын
@@kaczuchasly5174 yes, if you want to use camea's IP stream function to stream to KZfaq, facebook... directly, you'd better let router assign ip address for the camera.
@Temur_Odinayev_12307 сағат бұрын
How to connect to a computer?
@gianfrancoserioli3789 Жыл бұрын
Is it possible to use a pair of these cameras just to record a conference? I do not need any streaming, I would like to use them as videocameras.
@fomako977811 ай бұрын
your can use the cameras as conference camera, it has USB 3.0 video out, computer and conference software can recognize it automatic, but the camera doesn't have recording function, you can use other streaming software (such as OBS) to record and save to computer directly.
@a3iuuu10 ай бұрын
Can you mute the beep sound?
@fomako977810 ай бұрын
yes, please go to controller's settings -> beep-> enable to off
@Editor12064 ай бұрын
My Fomako controller is not showing the ip addresses of my Fomako cameras and controller.
@fomako97784 ай бұрын
Dear Friend, please connect cameras and controller to the same router, router will assign IP address for them. if still can't work, please write to us, we will help you to find out the problem.
@gbadebobellos5077 Жыл бұрын
Does the Fomako work at 1080p50
@fomako9778 Жыл бұрын
yes, FoMaKo camera works at 1080P50, 1080P60 , 1080i50, 1080i60, 1080P59.94 , 1080i59.94 and other resolution
@christianamuliproductions7 ай бұрын
Can i get a link to the switcher
@fomako97787 ай бұрын
i think youtube don't allowed to post link directly, please go to Amazon and search "FoMaKo PTZ Controller" , by the way, it is a PTZ camera controller, not a video switcher
@SAGS999 ай бұрын
Does it need internet connect with router? Please
@fomako97789 ай бұрын
Dear Friend, router doesn't need to connect to internet. Just use Ethernet is ok.
@budibk26 ай бұрын
Can be integrated to OBS Application?
@fomako97786 ай бұрын
yes, it is ok , more detail please write to us directly
@djrhedcarriedo54377 ай бұрын
Do you have any supplier here in the Philippines, I need to upgrade need something like this.
@fomako97787 ай бұрын
Dear Friend, currenlty, we don't have local supplier in your country, pleas write to us directly, we will help you.
@djrhedcarriedo54377 ай бұрын
Thank you for your immediate reply on my comment. which country are you from? How long will it takes to get this item if I purchase it to your company. Tnx
@fomako97787 ай бұрын
@@djrhedcarriedo5437 we have stocks in many countries, such as USA, UK, JP, CA, DE, FR, IT... , if ship to Philippines, we will ship from Hongkong or China
@5058532 ай бұрын
I have a Fomako system set up on my church. We use it to stream to FBLive and Zoom via OBS. We are having trouble getting the video and audio to sync on the live stream. Is there a better way to stream using ip camera setup to make sure audio and video sync up?
@Reporterdabocadopovo8 ай бұрын
Convida a todos para participar conosco TV repórter da boca do povo no KZfaq
@ferni00067 ай бұрын
Hello. Im from Mexico. How can I purchase this setup?
@fomako97787 ай бұрын
yes, it is ok. you can order from our USA Amazon store, it can ship to Mexico, thanks!
@syapiibatarapurwa9 ай бұрын
Mantap berapa harganya ?
@fomako97789 ай бұрын
Please visit our official support site and email us which models do you need, we will quote you the exactly price, thanks!
@guilhermefreitas998310 ай бұрын
Cam needs have NDI??
@fomako977810 ай бұрын
NDI is one of the streaming method, it has eaiser settings and lower latency. if you get the no-NDI version camera, you can also setup great live streaming system.
@notsidneyfps75662 ай бұрын
my fomako login menu looks much different why so ?
@fomako97782 ай бұрын
Did you purchase the camera two years ago? If so, please contact us through our official website, We will help you check if there are any new update for your camera.
@notsidneyfps75662 ай бұрын
@@fomako9778 can I call customer support for live help or is it only back and forth through emails ?
@sionevaka5681 Жыл бұрын
Where can I buy this please?
@fomako9778 Жыл бұрын
Dear Friend, please Go to Amazon, search "FoMaKo", you can find FoMaKo Amazon store. Thanks for your interesting.
@baconheightsmedia4 ай бұрын
How do I update these cameras?
@fomako97784 ай бұрын
please write to us, we will check your cameras' firmware, and give you suggestions to upgrade the cameras.
@chooocoooleeezhang1251 Жыл бұрын
How can I purchase?
@fomako9778 Жыл бұрын
Dear Friend, please Go to Amazon, search "FoMaKo", you can find FoMaKo Amazon store. Thanks for your interesting.
@GraceDeacons-un5nr2 ай бұрын
Background "music" is annoying. Otherwise good job.
@fomako97782 ай бұрын
thank you ;)
@djsnickatnight28193 ай бұрын
Can I use it with OBS?
@fomako97783 ай бұрын
Yes, You can use IP stream or USB stream to OBS
@djsnickatnight28193 ай бұрын
Great, thank you! @@fomako9778
@jagdambaphoto4925 ай бұрын
How can i purchase in india
@fomako97784 ай бұрын
please write to us directly, thanks!
@decouvrirlecentre4080Ай бұрын
J'ai besoin d'un devis pour un kit compet
@fomako9778Ай бұрын
Dear Friend, please visit our official support site and write to us, we will quote you details price , thank you !
@Silvia-ji8em4 ай бұрын
Como
@brandonjordan19515 ай бұрын
Well it looks to me as nothing much has changed controller wise
@LucasPereira-en7cc5 ай бұрын
Pra mim mudou, veio faltando uma opção
@m2vision5369 ай бұрын
Harganya berapa?
@fomako97789 ай бұрын
please go to our official website and contact us, thanks!
@bahamasc3 ай бұрын
KC608 Pro v KC608N Pro?
@fomako97783 ай бұрын
KC608N is the NDI version of KC608 Pro KC608N has NDI control protocol , it can control NDI PTZ cameras by NDI control protocol; KC608 Pro will use Visca over IP(Sony Visca), Onvif protocol to control PTZ cameras.
@bahamasc3 ай бұрын
@@fomako9778 So with this KC608 Pro I can still use NDI for video. Just not to control, correct?
@fomako97783 ай бұрын
@@bahamasc The main function of the controller is to control. So, it does not affect the video functionality of the camera