Can I desactive de zoom in and zoom out on active tracking ?
@fomako977810 сағат бұрын
Yes, in our newest firmware, you can turn off auto zoom in-out on AI tracking, then you can control the camera's zoom during AI auto tracking.
@fsjpii14 сағат бұрын
I have FMK30UH and command doesn't work, error "unsupported Operation!"
@fsjpii12 сағат бұрын
NDI
@fomako977810 сағат бұрын
@@fsjpii please write to us directly, we will check and find out the reason for you.
@FleetfootMike2 күн бұрын
Perfect, exactly what I needed to know - thank you!
@fomako97782 күн бұрын
Thank you very much!
@cesarlealseguridadelectron75006 күн бұрын
Hi Zoey. Nice to see you in the tutorials.🎉❤ Greetings from Colombia. I have already installed the Fomako cameras and they are excellent.❤ I highly recommend them.🎉
@fomako97782 күн бұрын
Thank you very much!!
@Temur_Odinayev_12308 күн бұрын
We purchased 2 pose cameras and a control joystick, now I don’t know how to stream video if the video is connected to a computer
@fomako97788 күн бұрын
you have two cameras, i think you want to switch the cameras' videos from Cam1 to Cam2, from Cam2 to Cam1. If so, there are two ways: 1) use software, such as OBS, Vmix. use RTSP or NDI protocol stream to OBS or Vmix, and then, stream the video to video platform(such as KZfaq) from OBS/Vmix 2) use hardware: HDMI video mixer switcher. This model support 4K 60fps, if you want to get a HDMI video switcher, you'd better get at a better one which can support HDMI 4K 60fps. you can also write us for more details.
@Temur_Odinayev_12308 күн бұрын
Good afternoon.Is it possible to connect a camera controller and stream video?
@fomako97788 күн бұрын
The controller joystick only has PTZ control function, control the cameras' movement.
@Temur_Odinayev_12309 күн бұрын
How to connect to a computer?
@fomako97788 күн бұрын
several ways to connect to computer: 1)visit camera's IP address in web browser 2) USB 3) stream to software such as OBS, Vmix 4) use Video mixer switcher 5) If you use HDMI or SDI, you can also use HDMI to USB , SDI to USB video capture card
@relaxxx595024 күн бұрын
How does the signal get sent to the laptop for obs studio?
@fomako977823 күн бұрын
with FoMaKo video switch : KC601 Pro, you almost don't need to send the signal to OBS. becuase KC601 Pro video switch has live streaming function, it can stream to KZfaq, Facebook directly. if you really need to send the video to OBS, there are several ways: 1, use camera's RTSP stream function to send cameras' video to OBS 2. USB KC601 Pro's USB 3.0, OBS will recognize video switch as a normal USB camera.
@carlosarsosa25 күн бұрын
FoMaKo NDI Camera PTZ Camera 20x working great with HDMI Connection for now......watch the image. kzfaq.info/get/bejne/rrp3o7SlxpvKfnU.html (All settings are as you took the camera out of the box.) Just imagine if we adjust it.
@fomako977823 күн бұрын
Thanks for choosing FoMaKo. just watched your video, the color and picture quality are great ! wish you can share more videos 👋
@leonardoaleixo313326 күн бұрын
Tenho uma dessas, funciona bem, só o track automático que não é bom. Quem quizer ver essa câmera fincionando vê lá m.kzfaq.info/get/bejne/m9meZaScmbizZIk.html&pp=ygUUbWV0b2Rpc3RhIGRhcyDDoWd1YXM%3D
@musclecam27 күн бұрын
Thank you for this demonstration. I am interested in 4 of this camera. With NDI, the video should be able to transmit via the Cat 6 cable to the switcher? Without needing to use extra HDMI cables. I want to use a Blackmagic ATEM Extreme Pro ISO switcher for this setup. Can I use NDI for this?
@fomako977826 күн бұрын
No, because the Blackmagic ATEM Extreme Pro ISO doesn't have NDI signal switch function. it only has HDMI video in and HDMI signal switch funtion. If you want to use NDI, you can choose our NDI camera, and use NDI stream to computer and use Vmix or OBS to swtich the NDI signal.
@Vidman1981Ай бұрын
My apologies for so many questions... When working with a PTZ Controller, how does the joystick controller or position presets work with the AI tracking? When you enable AI tracking, does it disable the joystick and presets - or - does the Presets / joystick disable the AI tracking? I am considering using this in recording dance recitals. I'd like to have a 'end of / start of performance' preset. and then let the AI tracking take over once the performances start. keeping it a tight-wide shot of the groups. I am very curious as to how the AI Tracking and Presets work together.
@Vidman1981Ай бұрын
What is Region Tracking?
@fomako977827 күн бұрын
It is usually used for tracking in fixed areas. For example, teacher on the front of a classroom. To protect the privacy of students, the tracking area of the camera can be confined. When the teacher walks in the setting area, the camera tracks the teacher; When the teacher walks out of the setting area, the camera will stop tracking. This ensures students not appear in the camera's frame and protect their privacy.
@mauricethomas1659Ай бұрын
Can you log into wifi without a computer?
@fomako9778Ай бұрын
the camera doesn't have WiFi or wireless function. If the cell phone/iPad connect the router by WiFi, and the camera ,cell phone/iPad conenct to the same router, you can use cell phone/iPad's web browser to visit camera by camera's IP address.
@silverryusei310Ай бұрын
thanks
@paulreed2409Ай бұрын
We bought FoMaKo cam bundle for our church. I hooked it up to the controller and everything works using POE. I was told these were NDI compliant but cannot get them to show up when trying to setup OBS the model of camera is fmk20sdi pro. This is very frustrating, help because can't seem to contact the company
@fomako9778Ай бұрын
Dear Friend, Please confirm your cameras' model ID, FMK20SDI pro, it is no-NDI model; KN20A Pro, it is NDI model, the NDI model cameras printed NDI logo at front of the camera.
@ramakrishna9218Ай бұрын
Best price
@fomako9778Ай бұрын
Thanks for your interesting, please check our Amazon price , you can also write to us directly
@professionalstreamingtvАй бұрын
❤❤❤ Very good
@fomako9778Ай бұрын
Thank you
@FrancoAversaАй бұрын
Great presentation !
@fomako9778Ай бұрын
thank you
@user-uc5sm7yd3iАй бұрын
تحياتي لكم ما السعر
@fomako9778Ай бұрын
Dear Friend, our Amazon price is US$529.00
@bryantwest4887Ай бұрын
Thank you!
@woleyfaseru80172 ай бұрын
Would you be kind to share setup configuration with YoloBoc Pro
@fomako97782 ай бұрын
Dear Friend, Use HDMI cable connect our cameras to YoloBoc Pro's HDMI-in port is ok.
@decouvrirlecentre40802 ай бұрын
J'ai besoin d'un devis pour un kit compet
@fomako97782 ай бұрын
Dear Friend, please visit our official support site and write to us, we will quote you details price , thank you !
@Vidman19812 ай бұрын
Does the FoMaKo AI PTZ Camera have a plugin for Companion Streamdeck control?
@fomako97782 ай бұрын
our camera supports Bitfocus Companion, if you already ordered our camera, please contact us for the instruction.
@Vidman19812 ай бұрын
@@fomako9778 I have not yet purchased, but this is one more of my reasons to do so. Does the Presets let you control PTZ movement and speed to make good 'live movement' shots?
@fomako97782 ай бұрын
@@Vidman1981 Yes, you can also adjust the preset speed and preset zoom speed.
@Vidman19812 ай бұрын
@fomako9778 i would love to see some tests of this if it ever becomes another video tutorial like this one with thr AI tracking. Regarding the AI tracking l, can this be turned on and off from the joystick controller or only the remote control?
@fomako97782 ай бұрын
@@Vidman1981 Thanks for your interesting. we will upload another detail video to show the AI tracking function performance next week. Our camera has 4 ways to turn on/off AI tracking. 1. Remote Control 2. Control Joystick customs key F1 and F2 3. Webpage 4. menu setting
@TheRosemary06102 ай бұрын
Can this be used for broadcast live streaming
@fomako97782 ай бұрын
each camera has live streaming function. the PTZ camera controller only has PTZ control function. If you need a video switcher with live streaming function, please check FoMaKo KC601 Pro in this video: kzfaq.info/get/bejne/ibZyadtomNW0iGg.html
@kerolosakraz2 ай бұрын
How do you connect the joystick to the video switcher via Ethernet? I am trying to get the picture out of the joystick to the video switcher
@fomako97782 ай бұрын
Dear friend, the joystick uses IP addresses to control cameras, so, controller joystick and cameras should connect to the same router. for video, you need use HDMI cable connect camera to the video swither.
@kerolosakraz2 ай бұрын
@@fomako9778 thank you for getting back to me! Can I take the signal from the joystick to the video switcher? If so, How? The joystick only has Ethernet and USB, and VGA.
@fomako97782 ай бұрын
@@kerolosakraz Controller joystick doesn't have video out function. the "VGA" port is RS232 control port, USB port is reserved and doesn't have function currently. Hope that helps.
@kerolosakraz2 ай бұрын
@@fomako9778 I have PTZ cameras that are connected to a POE switch. They don’t have HDMI or SDI outputs How can I input the video feed into your FOMAKO video switcher? The diagram for the Fomako video switch shows I can input my IP cameras via LAN, can you explain?
@fomako97782 ай бұрын
@@kerolosakraz almost all video switcher can onnly support HDMI or SDI video in, doesn't support IP Streaming video in. FoMaKo KC601 Pro is HDMI video swither, can only switch HDMI signals. For the network port on FoMaKo video switcher, it is for IP control cameras and IP stream to streaming platform by RTSP. Hope that helps.
@BlakeTheFutureShow2 ай бұрын
I just bought this device and I’m new to this. I have a couple of questions. 1 . How and where do you upload pictures and videos? 2. Can you LIVE stream more than 2 media channels? 3. Can you watch a video on your laptop and watch it at the same time on the switcher?
@fomako97782 ай бұрын
Thanks for ordering from FoMaKo. for your problems: 1. you can only upload backgroud pictures to the video switcher, can't upload backgroud video. 2. You use USB 3.0 and RTSP IP streaming at the same time. And you can also record 1080P 60fps high quality videos at the same time. 3. Can't preview video on computer, becuase most computers only have video out function , doesn't have video in function. You can use "PGM" or "MVR" HDMI video out to TV or HDMI monitor to preview the video. Please write to us directly for more details.
@GuitarandMusicInstitute2 ай бұрын
Hi, I wondered if you could give me some feedback on the product, is it worth purchasing and does it function and work as they say it does? Thanks.
@notsidneyfps75662 ай бұрын
my fomako login menu looks much different why so ?
@fomako97782 ай бұрын
Did you purchase the camera two years ago? If so, please contact us through our official website, We will help you check if there are any new update for your camera.
@notsidneyfps75662 ай бұрын
@@fomako9778 can I call customer support for live help or is it only back and forth through emails ?
@GuitarandMusicInstitute2 ай бұрын
I’m interested in buying this mixer. Can this work with any camera with an hdmi? I have a canon 750d as well as a couple of webcams, will this work?
@fomako97782 ай бұрын
yes, it can work with any HDMI cameras, but can't support 4K input, support 1080P 60fps max.
@GuitarandMusicInstitute2 ай бұрын
@@fomako9778 thank you for responding. One other question, there have been some negative comments made about how the KC601 is used, for example, uploading images in specific formats and the general use of the device. Will you be releasing an upgrade to the firmware anytime soon to address these worries?
@fomako97782 ай бұрын
@@GuitarandMusicInstitute thanks for your suggestion..Live streaming is a very serious matter, and customers must ensure that any operation does not affect the normal progress of live streaming.
@GuitarandMusicInstitute2 ай бұрын
@@fomako9778 thanks for the answer, but can you answer the question… will you be updating the firmware anytime soon? It’s becoming obvious that your product has a very peculiar way of working.
@fomako97782 ай бұрын
@@GuitarandMusicInstitute We use an FPGA embedded system for our video switcher, Need to use images based on baseline standards, Because there are many formats for images, in order to ensure that the background image is loaded successfully without the situation of unrecognizability and loading of the image. So, the background and logo images need to be converted into baseline standard images using our tools first.
@5058532 ай бұрын
I have a Fomako system set up on my church. We use it to stream to FBLive and Zoom via OBS. We are having trouble getting the video and audio to sync on the live stream. Is there a better way to stream using ip camera setup to make sure audio and video sync up?
@fomako97782 ай бұрын
Thanks for ordering FoMaKo PTZ camera system. for the sync problem, please check OBS Audio mixer , to set the sync offset.
@GraceDeacons-un5nr2 ай бұрын
Background "music" is annoying. Otherwise good job.
@fomako97782 ай бұрын
thank you ;)
@jeremycooper81503 ай бұрын
Does this support network cameras using RTSP?
@fomako97782 ай бұрын
Dear friend, It is HDMI video switcher, it can only recognize HDMI video in signal
@hugoflores59333 ай бұрын
Hola, cómo hago para cargar una imagen personalizada y ponerla de fondo?
@fomako97782 ай бұрын
Dear friend, please write to us, we will give you the detail instruction
@ajilful3 ай бұрын
Does this support ndi?
@fomako97783 ай бұрын
Hello friend, do you want to switch NDI video source ? but this is HDMI video mixer switcher, it only support HDMI video in.
@ajilful3 ай бұрын
@@fomako9778 yes, do you have NDI video switcher like this one ?
@fomako97783 ай бұрын
@@ajilful very sorry that hasn't released NDI video switcher
@kevsretrogaming3 ай бұрын
Is there any settings for you to adjust how far or close you want the AI tracking camera to follow
@fomako97782 ай бұрын
with the newest firmware, you can set "Close up, half body, full body" modes.
@ellarpc3 ай бұрын
I wish you made this in a version with SDI.
@fomako97782 ай бұрын
You can use SDI to HDMI video converter to convert SDI signal to HDMI signal. because SDI video swither is much more expensive than HDMI video switcher
@bahamasc3 ай бұрын
Can this work with streamdeck? For example, turn on/off ai tracking, go to pre-sets ec?
@fomako97783 ай бұрын
Yes, it is ok. You can use Visca command to control the AI on/off and other actions of the camera.
@BronsenHartley3 ай бұрын
My auto focus is going crazy, how do I fix it, manual mode won't work either.
@fomako97783 ай бұрын
Dear Friend, please write to us, We'll show you how to correct the focus.
@flipping_for_funds3 ай бұрын
Where can I find a replacement remote for my Fomako FMK20??
@fomako97783 ай бұрын
please write to us directly, we will process for you.
@tsproav3 ай бұрын
Is the router needed? Is a switch just needed to connect the PTZ cameras to the controller?
@fomako97783 ай бұрын
You'd better get a router in the system. because the router can assign IP addresses for the cameras and controller automatically, It will make installation easier. If don't use router, you have to set the IP address, gateway, subnet mask for cameras, controller and computer, it is a very complex and error prone task.
@tsproav2 ай бұрын
@@fomako9778 Thank you for the reply, any specific router? Just any wireless router?
@fomako97782 ай бұрын
@@tsproav Just use a regular router is ok.
@kaonashi3D3 ай бұрын
What’s the point of the network router? U have a Poe switcher. There is no need for it for extra stuff
@fomako97783 ай бұрын
router used to assign IP addresses for the devices, if you are professional at network, of course can remove router and do network settings by manual.
@hiteshdekate42414 ай бұрын
how update firmware ?
@djsnickatnight28194 ай бұрын
Can I use it with OBS?
@fomako97784 ай бұрын
Yes, You can use IP stream or USB stream to OBS
@djsnickatnight28194 ай бұрын
Great, thank you! @@fomako9778
@julelyle4 ай бұрын
Does it capture audio too? Or do I have to run the audio from the mixer directly to my computer?
@fomako97784 ай бұрын
Dear Friend, most PTZ cameras don't have built-in microphone fuction, becausethe PTZ camera will be mounted a little far from the speaker, so, you need use your audio system or external microphone
@julelyle4 ай бұрын
Ok. Thank you
@julelyle4 ай бұрын
Wait, Can I run the audio through there using the "line in"?
@fomako97784 ай бұрын
@@julelyle yes, you can connect your audio system or microphone to camera's line-in. but please note that camera's line-in port doesn't have power function, your audio system or microphone must have power supply or built-in batteries.
@julelyle4 ай бұрын
Ok, thank you for sharing this info with me
@bahamasc4 ай бұрын
KC608 Pro v KC608N Pro?
@fomako97783 ай бұрын
KC608N is the NDI version of KC608 Pro KC608N has NDI control protocol , it can control NDI PTZ cameras by NDI control protocol; KC608 Pro will use Visca over IP(Sony Visca), Onvif protocol to control PTZ cameras.
@bahamasc3 ай бұрын
@@fomako9778 So with this KC608 Pro I can still use NDI for video. Just not to control, correct?
@fomako97783 ай бұрын
@@bahamasc The main function of the controller is to control. So, it does not affect the video functionality of the camera
@bahamasc4 ай бұрын
whats the diff between the KC608n and KC608 controller?
@fomako97782 ай бұрын
KC608N is the NDI version of KC608 Pro, which has NDI control protocol.
@mrutubeuk4 ай бұрын
what NDI version comes with this? Do you need to buy NDI license separately?
@fomako97784 ай бұрын
Dear Friend, FMK20UH NDI comes with built-in NDI license, and NDI version is 5.0
@1providencecbaptistchurch4464 ай бұрын
can't get the computer to unblock cameras. or show through usb or hdmi.
@fomako97784 ай бұрын
Hello friend, May i know which camera do you have please ? Please write to us for your detail problem. We will help you to find out the problem.
@Editor12064 ай бұрын
My Fomako controller is not showing the ip addresses of my Fomako cameras and controller.
@fomako97784 ай бұрын
Dear Friend, please connect cameras and controller to the same router, router will assign IP address for them. if still can't work, please write to us, we will help you to find out the problem.
@rickygore93344 ай бұрын
Can you turn off the beep? Each time you press a button it makes a loud beep.
@fomako97784 ай бұрын
yes, please go to controller's "setting-> Beep" to turn on/off, and there are three beep styles to choose.