Thank you Clinton, I love how much time you invest with your sons. My Father did that with me 60 years ago as he tutored me in the correct way to use band saws, jointers, planers and routers. And to this day I still think about that as I look at my hands and smile as I wiggle all my fingers. I've worked alongside many shipwrights who were missing fingers because they learned the hard way. You're a damn fine Dad!

the best thing about this is Hunter can brag “me and my Dad rebuilt this truck”

My dad developed a brain issue when I turned 14. It went away when I turned 22. I wish I would have understood that I didn’t know it all and that he was teaching me, which he certainly was. I would give everything I own for one more day of working alongside him. Your son’s are fortunate for what they are learning from their dad. Well done!

Unbelievable how those parts were packed, shipped, then dumped by the side of the road!! I love Summit Racing too - hopefully they'll coach the guy who loaded up your order so he does a better job next time. And the way it was all "delivered" was inexcusable.

Hunter is a very lucky young man, hope he appreciates all dad does for him.

It’s great to see you teaching your sons how to build and take care of their trucks. They will remember this for their lifetime and appreciate the time you took to be with them and teach them!

How great it is to teach your son mechanical skills. He will remember your help the rest of his days.

Father of the decade! So awesome to see a father mentoring his sons and providing the tools and knowledge for them to continue the tradition of hard work and true American Values. I salute you and your family for being a shining example of what a family business should be. May you be blesssed and prosper with your hard work and exceptional values. Editor, you are doing a wonderful job with thess most excellent videos.

Wwwooooww outside the gate!!!! I had FedEx leave a 50 inch smart TV at the mailboxes in my old apartment. And stated on my shipment bring to door! Same as you it wouldn't have been out there long! They need to do better.

What a Dad, where were you when I was a teenager? I know, you weren't even a gleam in your daddy's eye yet. That truck is gonna be righteous.

I’m not an engine building expert but I don’t think it’s going to run its best with a camera in the cylinder lol love watching the young guns building their trucks

It's great watching you help and support your kids, teaching them all your knowledge and tricks of the trade you have picked up over the years and probably been shown to you by your dad..they are very lucky.. I just wish my dad had supported me the same over the year's...

Thanks C&C highboy build is good times particularly enjoy your making memories with your family

Great video! Boys gonna have a fun little ripper . Good seeing you learning the kid on a fun project , be something he will always remember

Looking like one very cool motor , Hunter is one lucky young man especially working with his dad and learning from the best !!

Clint, I am constantly impressed with how well you manage to get us camera views of what you're working on or discussing. You do it superbly and I thank you.

Sooooo jealous. Having a cool vehicle at that age will change your life, building it and knowing how to fix it gets you even further.

What a privilege to have the spaciousness of a well equipped shop to tackle an engine rebuild. 👍

Long videos R NOT A problem. This series with your boys wrenching and learning with you is very enjoyable! Please record more. These are some kick butt home movies, the boys have a record of skill sets being built along with their confidence. Skill and expierence can not be deminished or over looked. Good on you fellows.

Hiya Clint and co. enjoying the build, the longer video...more on this build, would be awesome and appreciated. The paint job, top notch Kevin. 👍👍🍻

I don’t think I would be as excited as you get working on vehicles. You guys do a great job at all you do.

I bet the boy's classmates/buddies are in awe of work you all share. A guy can really be proud of something "he built"!!!!!

Great job he will never forget ❤❤

When I was younger I built a three hundred ford in line

Fantastic work. And pretty good on the engine too. My dad and I did several things together and when I was 21, I met my wife. On the week that we were getting married, he had tests ran that he kept under his hat. A month later he told me that he had cancer. He allowed himself to be a test subject and lived another three years. Y’all need to do anything you can with each other awesome content.

Clinton, I love the way you are teaching your son's responsibility and what they're doing. It's a blessing to see such love and care that you have for your boys 😊❤ Thank you for sharing!

The young man is soaking this up like a sponge.

Clint, on the cam bearing installer the white cone goes on the shaft and centers the tool in the cam bores. just like line boring loader arm pins. the tool will then be straight when installing or removing the bearings.

Great Dad and son time, we’ll done

Simply have to love a first class engine build. Can't wait to see the first start!

Clint, y’all are doing a fantastic job! Take care and I’ll see y’all down the road…

No bs, he personally knows every cylinder. Cool stuff he built with his dad and worked hard for. Great work raising a man and working beside your best friend.

Clint, a little tid bit for you. A very good buddy of mine works for Fed Ex..been a courier for 28 years. He’s told me personally, (because like yourself I had some complaints) that Fed Ex is trying to move away from the current service to a 100% sub-contract service. It’s less headaches for the company has a whole and puts the burden on the subcontractor. But the customer service has plummeted..trust when I say you’re not the only one frustrated. My buddy has told me to use UPS many times…

so many people say elderbrock instead edelbrock. it always makes me chuckle.

We're not professionals, right and I am the Pope.... Nice video.

C&C Equipment.. Cool video. ALL of the rings should be checked and file fitted (or make bore bigger with hone) to the perspective bore they are going in. All of the rings are probably a little bit different in size as are the cylinder bores. Just because one ring fits doesn't mean all of them are within spec. ALWAYS fit the rings to the cylinder bore it is going in and don't mix them up. I have built engines where when I checked the gap in the cylinder I had to file fit some of the rings and some of the gaps were to big right out of the box. When that happens you have to buy more rings. Nothing you can do about a ring that the gap is to big except set it aside for the next engine and buy new ring/s. It doesn't happen all the time but it does happen.

This is what makes us fathers important, teaching important problem solving skills, to pass down the knowledge to younger generations. 🙏

Clint passing the Knowledge down to his Son , cant get any better then that. Reminds me of working with my father on his Buick in the garage.

Nice job. Brings back memories. I had a 79 stepside I put a 460 in about 35 years ago. Haha. Been a while.

What an EDUCATION FOR YOUR SONS CLINT!!!.YOU ARE A GREAT TEACHER AND FATHER 🎉...IN YEARS TO COME I CAN SEE THEM TEACHING THEIR KIDS 😊❤

There is a white cone your cam bearing tool kit. That is to slide over the shaft after the tool, small end toward the engine, and the cone is pushed into and held in the outer cam bearing hole to keep the shaft centered while you install a bearing. That way the bearing is installed square to the bore.

Hunter, who is the lucky girl or girls that get to cruse town with you in your soon to be done 460? ;) Be safe showing off the new build!

It's good to see a father teach their sons mechanical skills, and good to see they're interested learning. That 460 should be sounding good when finish. Thanks for the video

It was a joy to watch father and son working together and both learning as you go along. I also learned a lot, although it is unlikely at my age I will ever be working on engines again, that for me is fifty years in the past.

Love watching you work with the boys. They are getting a priceless amount of knowledge.

Father and Son working on a project and learning together. Priceless!

Hello Mr. C & Mrs. C Kevin and team. Hope your keeping my tools in good shape. LMBO have a good day everyone!! 🎉❤❤

Cool build, enjoy the content on this channel, enjoy !

Love watching you work with your kids.

Great job guys fun to watch

Notice he rested the entire cam on the front cam bearing on initial insertion. That cam bearing is now shot. Then they slathered the lube on. Those cams are heavy guys. Never rest the cam like they did.

Phenomenal project!! Really enjoying this and also how much your boys are involved with everything!! Such an awesome skill set!!

Gonna be a sweet ride 👍🏼

its always great to see building motors , your knowledge is amazing

I definitely enjoyed this. I wouldn’t call 500hp, in this engine, crazy. More like stout. 👍😎

I was taught at a very young age of 10. Was taking engines apart and put back together. Hands had to be washed and a light dusting of wet sawdust on the floor so no dust. Great job dad and son👍

Love the motor build

Love it! Love you working with your boys.

Awesome build

We had one of those hog washer when I was in the mechanic shop business

Great job guy's. Brings back memories of me and my old man working on everything from tractors to cranes. Happy days.

Great job. 👍👍👍👍👍👍. I could watch you guys all day

That is going to sound SWEET! #466.

Great job!

I like watching your interactions with your sons. I don't know enough about rebuilding a Ford engine to even comment. I'm lovin' this!

Great job. guys!

You make it look so easy, nice job

Love chicken on the Beach! Good choice Tucker!

Thanks for sharing your knowledge you're a great teacher

Great video, guys. Thanks for sharing!!

Awesome Build!! Thanks for Sharing.....

Great vid lots of detail!!

Awesome build gonna be a sweet engine

Can’t wait to see it fire up!

Doing a great job.

Been waiting for this rebuild!! .460 ..466 ,,Lov it ..1 pint in! Cheers!;-)! Golden!! ;-)!!

Nice job guys

I took it all in. Can't wait for the next video.

Nice job guys!

Great job teaching your son!

Great family time! Keep them coming! Thanks for sharing! 👌👍

Love the content when you and the boys are wrenching on the trucks. All the content is top-notch, but I do like seeing you passing knowledge on. Reminds me of days gone by with my dad.

Very entertaining. Nice to see diverse skill sets.

Love these videos.

Thanks for another great wrenchin' video!

Look forward to seeing you get in the truck and hearing it run. Awesome truck with a big block

Great to watch you and your boys. Love these videos.

Good Job!!!!!!!!!!!!!!! Hunter's gonna love it!

Good stuff guys from Phill and Sarah Parnham from New Zealand west coast 😊

You guys are doing an awesome job no matter you know how immature you are you guys are doing a job and it's nice that you get to spend time with your son's doing that or some people anymore all they want to do is play video games at least your sons are wanting to do the life and live the life that you have put in front of them and it's nice that they actually appreciate the help that you give them and appreciate the time you spend with them helping them learn how to set backlashes and how to set rings and how to do all this stuff so when they have their kids they understand what you were instilling in them

Another great video! This reminds me of my Dad and I rebuilding my first vehicle, an 87 S-10 Blazer. He wouldn't work on it unless I was with him. It looked like a new one when we were done. Keep up the good work guys that Highboy is looking great!

A great watch thanks for sharing brings back memories for me along time ago in school 👍👋🇨🇦

Nice build

😀👍👍👍👍😃very interesting for a person who is not into this type of work.👍👍👍😃😃🇦🇺🇦🇺

Love this video cannot wait for more of hunters high top. Cannot wait for hunter finished truck.

👏👏👏👍👍👍👌👌👌nice for your sons to have a dad that is a great teacher and a great mechanic.

nice work .

What a fantastic family spending time with the kids doing work on the kid's trucks you have got two very lucky kid's so great to watch getting there trucks done but learning vital skills at the same time your a great dad taking the time to learn to brilliant boy's really appreciate the videos you post one of the best channels on KZfaq don't ever change 🎉🎉🎉

My favorite sounding Ford engine

Your videos are so enjoyable! Can’t wait to see the next one!