Great video. I just bought my dads old 4100. 1977 i think. I have to do all this myself now. I know its 2 years old but i love it when guys show the real world. Beatin and bangin, dropping sockets, trying not to cuss. Good job.

Great job! The new paint looked great too.

Great job and great video. I had to do the same thing on my 4000 about the same time you posted this video. I knew something was up when the top of my tires was rubbing the spindle. My spindle bushings were so worn that the spindles were worn to far to be reused. I ended up getting a burr and pneumatic die grinder and cutting a small groove in my bushings so I could drive them out. I got my spindles from a local tractor parts yard and they included all the bushings plus wheel bearings. Wouldn't you know it, when I pulled the hubs off the inner bearings fell apart in my hand. All new bushings and bearings and the old Ford drives like a champ. I wish I'd found your video before I did mine though, I could have used a few of your techniques and made life a little simpler for me.

very cool we had a 5000 back on the farm in the 70s was a good tractor. just got to remember to grease it when i did the oil change

Good info. My 5030 steering spindle snapped in two so this is invaluable info. I hope I don't have to replace the extension arm, it hasn't been maintained in the 20 years before I got it.

I am sure you will love your 5000. I have a 69 Ford 4000 and it is my pride and joy. I drove a 4000 when I was milking cows as a teenager, so it makes sense for me to seek one out. Thanks for the good repair video!

The previous guy about greasing followed strictly the rule of : "I shall not grease a single thing,ever!"

good save on the axle,and thumbs up on the krylon rebuild too

ਬਹੁਤ ਵਧੀਆ ਪੁਰਾਨਾ ਫੋਰਡ

Very nice. And my ford 5000 need restoration

Good video thanks We want more

Great video. Thanks for sharing

Great, thanks

Dude awesome vidya I can appreciate this type of work I do it all the time, good job!!!

Very good

I have to do the same thing on my IH 454 somebody had the spindle out and I doubt if there is a thrust bearing and I know the felt seal on top is missing and it moves up and down by a 1/4 inch and the wheel bearing was three turns on the nut loose so thank for a great cideo

Good morning

Ilove ford

❤️👍

great info! I'm hoping you have PTO issues (hopefully I'm not jynxing you) so I can see how you fix it so I can do mine...unless you want to work on another 68 Ford gas 5000!

Hahaha "the chisel grew wings"

ค้าแรงมากกก

อันโท้มมม

โอเค

Great Video!! Doing the same repair on my 4000. Where did you source your parts?

You should tak the pin in had one come out on me driving along the road

i ford 5880 form pakistan

Nice joob paint kod and link thanks

I'm currently using a ford 5000 which wasn't properly maintained. Can you provide a parts list? Great video.

My friend good job .sorry to ask from where you get all the new part?

ต้องเอาสกัดปูนใหญย

I couldn’t take the cold..

🔧👍🏻

Do you have a foot pedal accelerator on that tractor?

The bearing is loose on its housing The bearing should be firmly secured

ใครไมอายลูกเลย

ช้อมสามวัน

My Ford 5000 tractor bearings were almost non existent. My neighbor is doing my spindle repair. With new bearings etc

Why r u not repair the centre pin of the axel

Hey can you please provide paint code used for your ford 5000 Thanks

สามวัน15000บาทสบาย

ไข่ดาวแฝด

แถมไข้ดาวส้องข้าง

เดือนละแสนห้า

กินข้าวกล่องฟรี

ชอมรถวันละ5พันบาท

ออกแล้วพักจิบเบียกอน