Рет қаралды 4,420
Changing the evaporative purge valve on a 2017 Ford Explorer Police Interceptor Utility(PIU) is a relatively easy task that can be accomplished with basic tools and some patience.
In this video I will show you step by step, from beginning to end, how to replace it. First you will need to locate the valve, which is typically located in the engine bay. Once you have access to the valve, you will need to disconnect the hoses and electrical connections that are attached to it. Then, you will need to unscrew the old valve and replace it with the new one. Finally, you will need to reconnect the hoses and electrical connections before you can start the engine. With some patience and the right tools, you should be able to complete this DIY video with ease.
An OBDII reader is also necessary to read and clear this trouble code from your vehicle's PCM.
In my case, the code was P0456 - EVAP System Very Small Leak Detected.
Items needed:
(paid links)
Replacement EVAP valve: amzn.to/3l7YM9D
8mm socket + wrench
clean rag
wd40(optional)
OBDII code reader: amzn.to/405TFpo
Time and patience