Truck has a 2.5” leveling kit with 37” grapplers and 2” shifted industries spacers. #nittotires #fordsuperduty
Пікірлер: 82
@finao82315 ай бұрын
Impressive truck but what's more impressive is the size of your garage. A mid size truck is the biggest you can fit here in Hawaii. F250 is my dream truck, but will have to wait until I can put it in a garage 🤙🏾
@DM-tf6mk Жыл бұрын
Looks great!
@antimatter_7.3 Жыл бұрын
Thanks for making this video!! Mine wouldn’t go on either so thanks for the help!!
@bradkvick13823 ай бұрын
Beautiful! Everything about the truck, lift tires and spacers is just right.
@RockyRohde3 ай бұрын
Thanks!
@rogerstewart5140 Жыл бұрын
Sharp ride.
@dcrump2 ай бұрын
Thanks 🙏
@knowledgeseeker53935 ай бұрын
Thanks for doing this video. I really like the factory rims on my 23 f250. I was always wary of doing spacers because I had heard horror stories. I think I will try 2” Bora’s. The look you have is what I want. Also thanks for telling us about needing to bore the rear spacers for the heavy duty package as that’s what I have.
@RockyRohde5 ай бұрын
No prob.. thanks for watching! Check out my 24 limited video on my channel. I did the 1” Bora on it..
@michaelhill49616 ай бұрын
I ordered 4 for my 2019 F-250 KR. It has 37s on it and rubs. I dislike the idea of kidding ride of my chromes wheels so I’m gonna give this a try!
@garybain6780 Жыл бұрын
I would put a little Never Seize around the hub or you might not be able to get the spacers back off without beating them up if you want to remove them, especially in a snowbelt state where salt is used.
@RockyRohde Жыл бұрын
These have two notches in the back for removing with pry bar
@kailenmadden30036 ай бұрын
Would I have to cut the studs on 2” or should I just go with 2.5” 2020 gmc 2500
@lohrke24 күн бұрын
Was the speedometer affected at all because of the larger tires?
@Lumpschlevot3 ай бұрын
Thats a good look. It doesn’t look like you have any issues with garage height clearance. Is that a standard height garage door?
@RockyRohde3 ай бұрын
I have a 9x9 and a 9x18 on my garage..
@Lumpschlevot3 ай бұрын
@@RockyRohde Thanks. Those seem like high doors. I have a 2024 F-350 KR trim on order. Production is scheduled for the week of April 15. I want to have some things done at the dealership but I am not sure what will fit in my garage. My doors are 7 feet high. Will have to figure this one out.
@BIGRICKLITTLERICK7 ай бұрын
Nice video learned a lot! Question for you I have leveled 2022 SD truck and same tire but only 35/12.5 tires, really want to order the bora 2" spacers but really have no idea if it would rub! Since you have 37 and barley and issue with bumper do you think with 35 I would be ok? Sorry for the long Question. Thanks just trying to get it right!
@RockyRohde7 ай бұрын
2.5” level with 35’s should clear no problems with 2” spacers
@BIGRICKLITTLERICK7 ай бұрын
@@RockyRohde 👍👍👍
@sdavis7629 күн бұрын
I am running 295/65r20's on stock wheels currently with zero rub
@kylestrange118 күн бұрын
I have a couple of questions. First off, do you like the 1” or 2” spacers better? Second question, which thread pitch are you running? I have a 2022 F250 King Ranch and just ordered 37x13.50x20 Mud Grapplers. Currently have Toyo M/T but would like a the truck to look a little “beefier” without overdoing it
@RockyRohde18 күн бұрын
1” spacers work great I prefer them over 2”..
@JMM021997 Жыл бұрын
2:50 I have a 2020 f250 with the high capacity axle. Can I buy the 2wd rear center caps and use them on my rear axle? Thanks.
@RockyRohde Жыл бұрын
If you are running wheel spacers
@MrChipTalk5 ай бұрын
@rocky I need four of those exact shallow caps. Can you tell me where I can order them?
@RockyRohde5 ай бұрын
Ford.. tell them you need 2wd front caps..
@calebkildow69063 ай бұрын
@rocky do you have to run the bumper spacer with this setup? I’ve seen both answers and am just trying to decide
@RockyRohde3 ай бұрын
I did with 2” spacers.. with 1” no
@molonlabe77508 ай бұрын
Wheel spacers come with a free daily dirty truck.
@lbates031110 ай бұрын
So pretty much you have to cut the lugs when running anything less than a two inch spacer?
@RockyRohde10 ай бұрын
Yes.. you will have to cut some off even with 2”…
@hayden-px4vv4 ай бұрын
@@RockyRohdehow much did you end up cutting off?
@erickmatias10113 ай бұрын
I have a 2019 f250 with the sterling real axle (12 bolts) will the lip on the rear ones have to cut like yours?
@RockyRohde3 ай бұрын
If you have overload leaf springs yes. If not they should be the standard..
@kellysimmons60210 ай бұрын
Does this help with tires rubbing? My front tires rub when running after market 37” wheels
@jayknot668410 ай бұрын
No, it will make the rubbing worse because it increases the arch the tire makes when turning.
@croomrider97858 ай бұрын
@@jayknot6684only with aftermarket wheels with negative offset, stock wheels and spacers make it so you won’t rub on components
@Step-n-Wolf4 ай бұрын
@croomrider9785 he had to move the bumper out, so not true.
@jonathanodom474310 ай бұрын
Got mine from shifted..came bare aluminum, not powdered
@eriks63136 ай бұрын
Will this rub on a 4 1/2 inch lift ?
@RockyRohde6 ай бұрын
No it should not
@caysonwells96486 ай бұрын
hey i have a f250 with a 3.5 level kit do you think i could run 37x13.50s with these and not rub?
@RockyRohde6 ай бұрын
You will clear them fine.. They will rub radius arm and sway bar without spacers..
@austinmelton830611 ай бұрын
I’ve got the same exact truck and spacers and tires you have and mine is rubbing on the front tires closer to the front door on that plastic piece what did you do different there?
@austinmelton830611 ай бұрын
Did you take off that little black piece or cut it ?
@RockyRohde11 ай бұрын
It’s gone…
@user-tx2ck7uj4u8 ай бұрын
Did you cut the metal or bend it back? My truck still clips the metal even with the plastic gone
@RockyRohde8 ай бұрын
I had the Carli arms and it helped some by pushing axle forward. But I did some trimming and hammer work. I am going with 1" spacers this time to avoid the rubbing.
@user-gc3zl9xt9b11 ай бұрын
What size wheel is that stock? 20x8?
@bradkvick13823 ай бұрын
Yep, 20x8 +40mm offset.
@JAG6.77 ай бұрын
How is everything up with the spacer kit?
@Gentner91201 Жыл бұрын
Do you lose towing capacity with these shifted industries spacers?
@RockyRohde Жыл бұрын
No
@Gentner91201 Жыл бұрын
@@RockyRohde oh okay. I was always under the impression you weren’t supposed to tow with aluminum spacers. Love the rig
@RockyRohde Жыл бұрын
I have always used them. It is important to check torque every rotation. Buy good hub centric. Bora or Shifted.. If they are not hub centric don’t use them..
@erickmatias10112 ай бұрын
How do you know what axle you have?
@RockyRohde2 ай бұрын
Small sticker on axle tube will tell you 3.31 or 3.55
@jeffguthrie2600 Жыл бұрын
When you get your new Ford. Will you sale this Fird?
@RockyRohde Жыл бұрын
My wholesaler usually buys them from dealer and I get tax credit on my new truck.
@jeffguthrie2600 Жыл бұрын
What color is your 2024 Ford?
@kevinkozlowski146319 күн бұрын
near seen dual air bags
@gjolinares237 ай бұрын
Too bad it’s not easy to just find and buy replacement parts to convert for different bolt patterns. I don’t cares that much about the spacer part but I want to put new GM wheels on my Silverado HD 😅
@josuelabrada58142 ай бұрын
Can they hold weight ?
@RockyRohde2 ай бұрын
Yes
@marlonjose59212 ай бұрын
I have a 20 250, where can I get a set of 4 2”spacer
@RockyRohde2 ай бұрын
Motorsport tech Bora spacers… This is all I run..
@marlonjose59212 ай бұрын
@@RockyRohde Thank You. I have my truck for 4yrs but hesitant to try spacers because of bad stories i heard. But now i will give it a try… is it safe if im pulling my 38 ft RV?
@RockyRohde2 ай бұрын
@marlonjose5921 I have pulled large toy hauler RVs for years with them. Just check torque and inspect every rotation..
@jtother124210 ай бұрын
What size lift?
@RockyRohde10 ай бұрын
2.5 ready lift with tremor rear blocks
@chrisg500969 ай бұрын
Why does it say carli
@sdavis7629 күн бұрын
@@RockyRohde what size are the tremor read blocks
@RockyRohde29 күн бұрын
@sdavis76 tremor blocks are 3” and fx4 are 2”
@kennydebaene22795 ай бұрын
Why did you get rid of the American forces so quickly?