Hi welcome This episode the fiesta st180 gets new Brembo discs and pads
Пікірлер: 98
@normanstephens53913 жыл бұрын
Hi Mark. You never mentioned it but in the past. I found it's good practice when winding back caliper pistons to first take off the Reservoir cap. 1st it reduces any resitance on the wind back. 2nd it gives the opportunity to remove some fluid, which will be replaced by the fluid during wind back and top up if needed. I won't mention my tip for the Exhorst pipe cleaning. See you in the next one. Stay Safe. 😊👍👍
@iangalbraith12583 жыл бұрын
Your puller guy sure is very good at what he does, & I very much doubt anyone will ever notice that really small crease in the boots corner. As usual, your own work's truly exemplary, it's brilliant, simply superb Mark! Shane. :-)
@iandyson21763 жыл бұрын
Hey Mark really pleased your business and channel seem to be growing and your latest recruit Mrs R involved good luck and take care matey
@martynbagnall96053 жыл бұрын
Mark Its come up a treat. Inside the boot is no big deal except to you, but it's fine. Brakes defo needed doing but the alloy wheels refurb you have to just say you have a limit or else it's more time = money. You have to remember it's second-hand and cat car and so does the customer. I would have to stop myself as well but you have to learn to restrain yourself. Stay safe
@ResurwreckAutosUK3 жыл бұрын
Thanks Martyn appreciate it buddy stay safe 👍👍😷
@paulward96203 жыл бұрын
Looking good, love the attention to detail you put into these cars 🚗👌
@ResurwreckAutosUK3 жыл бұрын
Thanks Paul appreciate it buddy stay safe 👍👍😷
@garygrainger9783 жыл бұрын
Looking good Mark, looks like he's done a great job pulling the damage, the parts rack looks good👍
@markhamson74793 жыл бұрын
Loving your videos mate. Watching it on my TV, looks like nail in rear tyre 😉
@petes87463 жыл бұрын
Great video, really enjoying seeing the progress on the car. A very common issue on Fiesta ST180's is the brake caliper carrier sliding pins seizing. That's probably why the rear discs were in such a state.
@philipnewton75243 жыл бұрын
That guy u using to pull out back end dent did a fantastic job I would use him everytime u are ding a great job cleaning out the disc not many will do that when selling cars on and they would go with the old disc but u replaced them u are a top man Phil in stoke
@CFCARREPAIRS3 жыл бұрын
Keep up the good video 👍👍
@ResurwreckAutosUK3 жыл бұрын
Thanks buddy appreciate it stay safe 👍👍😷
@roysouthee22543 жыл бұрын
St looking good now can’t wait to see the end result 👍
@michaelstevens75333 жыл бұрын
Parts rack is looking great 👍 and a great job on the st aswell
@trevorjarvis30213 жыл бұрын
There’s only so many hours in a day Mark! - And spending most of the time on your knees on a concrete floor doesn’t help the situation at all. Don’t over do it - pace yourself. Well done to Mrs Resurwreck Autos on the bidding front, keep it in the family. Stay safe matey!
@ryanfrench20003 жыл бұрын
It sounds like a good idea putting new discs on the fiesta with what they look like 👌👍
@steverotherham56723 жыл бұрын
That's one good job mark 👍👍
@edwardmurdoch10623 жыл бұрын
Well done going to be a tidy car new brakes always helps sell👍👍
@stephencahill18403 жыл бұрын
Great job Mark the ST is looking great well done mate
@ResurwreckAutosUK3 жыл бұрын
Thanks Stephen appreciate it buddy stay safe 👍👍😷
@stevegillies11343 жыл бұрын
I think those disks needed changing tbh, I wouldn't have used them again. Nice replacement though 🙂 I personally would not have those alloys refurbished, a good cleaning would do...but I know what a perfectionist you are 😀 Well done today, stay safe bud! 👍🙂
@ResurwreckAutosUK3 жыл бұрын
Thanks Steve them alloys are driving me mad definitely not clean enough for me buddy 🤣😂stay safe mate 👍👍😷
@chazkay49993 жыл бұрын
Great blog bro 💯10 per cent 👌👌👌👌 can’t wait till Wednesday😀😀😀😀
@ResurwreckAutosUK3 жыл бұрын
Thanks buddy the new project is a Beauty stay safe mate 👍👍😷
@waynerountree92843 жыл бұрын
Great result just a little bit more work to do for it to be perfect great car thanks for sharing
@ResurwreckAutosUK3 жыл бұрын
Thanks Wayne appreciate it buddy stay safe 👍👍😷
@desholman88533 жыл бұрын
Good job so far, I'd let the next owner sort the alloys out and even the tyre's, they may wish to use a brand they trust and just price the car accordingly highlighting the above, seen on Instagram what the next project is and look forward to the unveiling, well done.
@johnbrooks80093 жыл бұрын
Keep up the work you doing Good job bring car back to life 👍
@ResurwreckAutosUK3 жыл бұрын
Thanks John appreciate it buddy stay safe 👍👍😷
@martinfield14843 жыл бұрын
Great content mark
@ResurwreckAutosUK3 жыл бұрын
Thanks Martin appreciate it buddy stay safe 👍👍😷
@mrjones20093 жыл бұрын
Clean and gonna be fresh I hope you’re making money mark
@jonnyisgood3 жыл бұрын
Been waiting for this one. New break discs and pads good call Mark . Coming together great , who ever buys it getting a good one for sure. Now put your feet up matey and have a cold one hahaha .
@ResurwreckAutosUK3 жыл бұрын
Thanks Jonny but I don’t drink really nice one buddy stay safe mate 👍👍😷
@Connellski19863 жыл бұрын
When you get a disc, it comes coated in a film of oil, it’s to prevent it from rusting while on the shelf. It should be cleaned off with brake cleaner before to prevent contamination. Way over thinking that slight dint inside boot, with the carpet and boot plastics would never ever know.
@ianfinch15223 жыл бұрын
As always you go above and beyond buddy and definitely lighten my evening up 👍 not to sure about the toilet cleaner though 😂😂 I’d try some metal polish next time 👍
@ResurwreckAutosUK3 жыл бұрын
Hi Ian I did think Metel polish but it won’t get the rust off have a look on KZfaq best thing to clean exhaust tips stay safe buddy 👍👍😷
@silvermane93703 жыл бұрын
Savage those exhaust tips with toilet duck! (Hands, formerly with skin, now available at Resuwreck Autos UK lol)
@grandad87533 жыл бұрын
Excellent job, have a look at o/s/r tyre, looks like a chunk out of the side wall. At 29.27 bout 11 o'clock
@ResurwreckAutosUK3 жыл бұрын
Thanks buddy I will check but I did have a good look around the tyres nice one buddy stay safe mate 👍👍😷
@andrewlightwood38953 жыл бұрын
One of the best money saving jobs you can do on a car your own brakes done my fronts today ,the workshop do a good job of pulling that rear panel it won't be long now till it's up for sale
@ResurwreckAutosUK3 жыл бұрын
Thanks Andrew the next project is a Beauty 👍👍😷stay safe buddy
@andrewlightwood38953 жыл бұрын
@@ResurwreckAutosUK look forward to it.👍
@stephenkelly56423 жыл бұрын
The cars looking great now mark. but your right the car can become a money pit. Can't wait to see the new car. Keep safe mate and see you on the next video.
@ResurwreckAutosUK3 жыл бұрын
Thanks Stephen appreciate it buddy sneak peak of the new project on my Instagram buddy stay safe 👍👍😷
@MrFartymarty393 жыл бұрын
Nice job on that brilliant and the new is it a mini Cooper
@loyalty7863 жыл бұрын
Hi mate to clean the exhaust tips you best of using brillo pads oh sanding paper
@brianiswrong3 жыл бұрын
On the back of this video,and your general idea of what's the right thing to do,I have subscribed👍 You know you sound like ray parlour (which as a north london born boy I like)
@jamesstephenson16573 жыл бұрын
Great work mate, did you clean the new discs with brake cleaner before you put them on ?
@davidyates65463 жыл бұрын
and just as I sad that. You said that 😂
@ResurwreckAutosUK3 жыл бұрын
🤣😂🤣
@dantheman73703 жыл бұрын
You’ve got a knack for getting bonny motors mark
@alanthomas13863 жыл бұрын
Love you channel been here a long time. In regard your brake jobs please check your sliders and clean them and regressed them. Use a silicon based grease not copper slip. I saw the back of your old discs and they were defiantly not wearing even due to sticky sliders. Keep up the good work but please check your sliders pal.
@ResurwreckAutosUK3 жыл бұрын
Thanks Alan I will check buddy but they was sliding ok nice one buddy stay safe 👍👍😷
@a11csc3 жыл бұрын
get in there mark
@ResurwreckAutosUK3 жыл бұрын
Thanks Chris nice one buddy stay safe 👍👍😷
@ianleak3 жыл бұрын
Another very good video on the st, I don't know where you are in the country, but I would like you to give my car a look over, stay safe mate
@ResurwreckAutosUK3 жыл бұрын
Hi Ian if i had the time buddy i will but i cant keep up with my own cars 😂😂stay safe mate 👍👍😷
@ianleak3 жыл бұрын
@@ResurwreckAutosUK nice of you to reply have a good evening mate
@waynelittle55833 жыл бұрын
Bleach to clean exhaust tips that's a new one 😳
@ResurwreckAutosUK3 жыл бұрын
KZfaq it buddy and I will always accept your apology 🤣😂
@davidyates65463 жыл бұрын
I'd say, don't do the wheels but change all the tires.
@robertbowes10013 жыл бұрын
Good choice changing them rear disks especially they were buggered looked like some cowboy yobbo has savaged them with a grinder 😔 and can you please get a knee board makes my knees hurt just watching you.
@pcjtech3 жыл бұрын
Great job, will you be investing in a hydraulic lift as all the knee work will come back and haunt you one day, I have two replacement knees to bear.testimate to that. Will be a really great upgrade and make your life so much easier. Loving your work as always.
@ResurwreckAutosUK3 жыл бұрын
Hi Philip nice one buddy yeah a lift would be nice maybe one one buddy 👍👍😷stay safe
@grahamvallentyne39123 жыл бұрын
try autoglem autosolve metal polish for the tips of the exhaust
@ResurwreckAutosUK3 жыл бұрын
Thanks for the info buddy stay safe 👍👍😷
@royharwood3 жыл бұрын
Mark, I am exhausted watching you, you're a grafter mate, great car for someone. Always a good idea to get the other half involved, takes the pressure off a bit. Did you purchase an extension cable for the obd2. Looking forward to the hot hatch, All the best.
@ResurwreckAutosUK3 жыл бұрын
Thanks buddy yes mate I did get a extension cable for the OBD port I will show that soon stay safe buddy 👍👍😷
@timneale88693 жыл бұрын
I've never seen someone clean a exhaust tips with toilet cleaner. I've use wheel cleaner for on my stainless steel exhaust wire wool fine then polished them??.
@ResurwreckAutosUK3 жыл бұрын
Hi Tim have a look on KZfaq best thing for cleaning exhaust tips 👍👍😷
@johnhigginson42203 жыл бұрын
Hi Mark you will have them lining up to buy this ford.
@ResurwreckAutosUK3 жыл бұрын
Thanks John appreciate it buddy it is a lovely car now and the next project is a Beauty stay safe buddy 👍👍😷
@Love5003 жыл бұрын
Just had a thought. If you open the roof by a single press, does it stop at the correct place, then another press to the correct place and don’t on? When the roof is open it disables the boot switch. If the roof ECU looses position it may need a reset. I’ll send you the roof initialisation instructions on Instagram.
@adamfavsvidc3 жыл бұрын
Brembo breaks lmao for next time (brakes)🤣
@ResurwreckAutosUK3 жыл бұрын
😂😂Sorted now buddy nice one stay safe 👍👍😷
@Mrflash2220063 жыл бұрын
Ultra common mistake even on car forums as long as Mark doesn’t break the brakes, that may just break him if he does - dyslexia is a hard mistress to please
@adamfavsvidc3 жыл бұрын
🤣🤣 its all good.
@markfraser47453 жыл бұрын
Hi Mark, a question for you please? What diagnostic tool, model number are you using?
@ResurwreckAutosUK3 жыл бұрын
Hi Mark so I’m using Autel maxicon 808TS it’s fantastic kit 👍👍😷
@shanebrown66673 жыл бұрын
First in for a change and fiesta ST time 😂 Guessing focus ST your looking at?
@ResurwreckAutosUK3 жыл бұрын
Hi Shane no mate not a focus ST its a good one buddy picking it up Wednesday 👍👍😷
@shanebrown66673 жыл бұрын
If resurwreck done duff duffs like Eastenders that was it right there 😂😂😂
@shanebrown66673 жыл бұрын
Is there no video today?
@ResurwreckAutosUK3 жыл бұрын
@@shanebrown6667 sorry buddy I can’t do it today but definitely tomorrow 👍👍
@Mrflash2220063 жыл бұрын
Solder and flux, electronics solder is flux cored, I only ever use No clean flux for reflow or rework on PCB’s, we all learn from our mistakes
@ResurwreckAutosUK3 жыл бұрын
Thanks for the info buddy 👍👍😷stay safe
@Mrflash2220063 жыл бұрын
No problem, flux stinks it permeates in to every thing, is that the draper flux core solder from toolstation ? If so you’re good to go
@ResurwreckAutosUK3 жыл бұрын
@@Mrflash222006 yea mate it is draper from tool station 👍👍😷
@themadcoachman3 жыл бұрын
Toilet cleaner on the exhaust tips ???? Never seen that before!
@ResurwreckAutosUK3 жыл бұрын
Hi buddy have a look on KZfaq best thing to clean exhaust tips I was surprised as well stay safe buddy 👍👍😷
@Mrflash2220063 жыл бұрын
You won a Corsa VXR ?
@ResurwreckAutosUK3 жыл бұрын
Nice try buddy but no sorry if you follow me on Instagram you will know 😉
@astonman43 жыл бұрын
Mark mate, you really should protect your hands with gloves, given all the crud you touch and your skin absorbs. Gotta' look out for your health buddy, otherwise Mrs Resurwreck Autos UK, won't be bidding, but taking care of you instead!