FORD Superduty - Rear Axle Fluid Change | EASY TO DO at HOME

FORD Superduty - Rear Axle Fluid Change | EASY TO DO at HOME | What AXLE do YOU have?? WATCH THIS

Рет қаралды 118,644

2 жыл бұрын

Thinking about changing out that nasty rear end fluid???? Tonight we show you how to do that and we go over the axle packages that you would have on your truck & WHAT fluid yours takes. Lets get the correct information to you so that your fleet, your tow pig, your pavement queen can have the BEST fluids rolling down the road. Thanks THANKS so much for watching each weeks episode, means a lot. Remember to LIKE - COMMENT - SUB - SHARE Catch ya on the LIVE STREAM?????
Join this channel to get access to perks:
/ @powerstroketechtalkwarod
To get hooked up like PTT please check out this link!
You won't be disappointed, I wasn't...trust me, ALL worth it!
****** www.limitlessautoworksLLC.com ******
Check out these other 6.7 Playlists!!
6.7 Oil Seals Replacements
• FORD 6.7 Oil Leak Repa...
6.7 Turbo Videos
• Ford 6.7 Powerstroke T...
6.7 Repair Videos
• FORD 6.7 Powerstroke R...
6.7 Engine Light Videos
• FORD 6.7 ENGINE LIGHT ...
6.7 Maintenance Videos
• FORD POWERSTROKE MAINT...
Check out my Instagram & Facebook
@PTT_W_AROD / Aaron Power Stroke
Business Inquiries: powerstroketechtalkwarod@gmail.com
Music: ------------------------------
Know Myself - Patrick Patrikios
------------------------------
To send a small donation to help my channel grow & to also to contact me, please visit my Paypal at my email powerstroketechtalkwarod@gmail.com
I am the creator and owner of this material. It does not belong to; nor is affiliated with ANYONE, except for me, the owner and creator. Downloading is strictly forbidden. Contact me if you want my material, its that simple! The events, the characters & even the firms depicted in my photoplay are fictitious. Any similarity to actual events, persons living or dead or to that of actual entities are purely coincidental.

Пікірлер: 284

@billevans3067 2 жыл бұрын

You must be psychic. I spent several hours this last weekend viewing videos on changing rear fluid but finally got frustrated after scouring your channel in disbelief that you didn't have a video on it. I never feel quite prepared to do a task until I see you show and explain it. And today, Voilà !... A rear diff' video! There are others who have decent videos on it, but your feel more confident and competent. Of the videos, I too watched one by Banks showing his replacement cover. Great presentation with a compelling argument for support. Is it worth $400?... It just might be. So, I have now: * changed engine oil, after watching your video, * changed Xfer case oil, after watching your video, * changed fuel filters, after watching your video, * lubed front axels, after watching your video, * and next on list is rear diff'... of course, after watching your video. I still have front diff' in near future, maybe after you post one. And I had trans fluid done at dealer, but I'll do it next time.

@PowerStrokeTechTalkwARod 2 жыл бұрын

Love it!! Front diffy coming sooooon 😉👀👀👀😉

@1John3.8 2 жыл бұрын

You're a couple tasks ahead of me but this is EXACTLY what I have been up to lately for the same reasons. This channel gave me the confidence to really understand my truck intimately and always aim to do my own work if at all possible.

@PowerStrokeTechTalkwARod 2 жыл бұрын

Thanks bro

@gamebredduramax71 8 ай бұрын

@@PowerStrokeTechTalkwARodis there a drain plug so o don’t have to remove the rear differential? I have a 22 f250 with the 7.3 50,000 miles.

@PowerStrokeTechTalkwARod 8 ай бұрын

@gamebredduramax71 only M275 axle

@bryanmontgomery4050 2 жыл бұрын

I always pull the fill plug first on everything I touch, don’t wanna drain it unless you know you can fill it!

@bradbitchasshoe 2 жыл бұрын

If every Ford technician had this much thoroughness, nobody would worry about warranty work....excellent job...i hate taking my 2019 f250 in for any kind of work, because nobody cares about customer service...you my friend do an excellent job and I wish you were local to me!!

@PowerStrokeTechTalkwARod 2 жыл бұрын

I can be local to anybody🤔😉

@IneptSoldier 2 жыл бұрын

I am very happy you did a video on this ... I didn't know for 100% what rear axle my Tremor had but now I know ... And also had no idea the m275 had a drain bolt .... So used to doing it the old way

@FlatPlaneCranky 2 жыл бұрын

2017 F250 Plati here and changed all fluids at 60,000 and I included the best upgrade….Banks rear diff cover!!! Absolute must do🤩

@AaaaandYerDhem 5 ай бұрын

The way you prepped those surfaces is pure gold. Love the work

@bryanlong1363 2 жыл бұрын

I used a 5 ton hydraulic Jack on the OEM Steele cover to remove it. Amazing how hard the cover was glued on.

@ChuckKarl525 3 ай бұрын

Did a lot of research to see what axle I had in my 2016 F350 Power stroke to be sure I did or did not need the friction modifier. The Ford dealer here was not sure based on my VIN both in the parts department and service department. Needless to say, I wanted to be sure of what I am doing, so I noticed that you had a video that included the electronic differential lock and friction modifier. Now I can rest easy. Thanks for your hard work on making these informative videos!!

@ckearnes 2 жыл бұрын

I just serviced the 10.5 and D60 in my Excusrion. Stoked to find out my F350 doesnt need the additive since it had the locker🤘 Also, Lube Locker gaskets are the bomb!

@tomcoppa2211 2 жыл бұрын

M275 for the win that is good info on the drain bolt. Doing a fluid change on my 17 KR today. Thanks Arod

@tundras4ever552 2 жыл бұрын

I did my first dif fluid change at 30k trying to get rid of any break in junk. Replaced it with Amsoil!!! Will probably change it very 50-60k miles

@vais3 2 жыл бұрын

Per Dana, you can utilize 75W-90 with the appropriate SHAE-256 spec. This applies to the front and rear Dana axles. On the Sterling 10.5, you can use the more common 75W-90 synthetic oils. I’ve personally ran 75W-140 in my 2017 with the Sterling rear axle with zero issues in temperature as low as 0° F. Personally, I run 75W-90 Mobil Delvac 1 full synthetic on both axles as it meets the necessary requirements for my application. The 75W-85 is not common and is only available through a few sources. Whatever is used, just be sure to change it based on climate and mileage. 30k miles is my personal threshold for axle oils. Your silicone preference is the same as my own. Best one for a diesel engine or an axle. Zero leakage.

@maurocatalan5378 2 жыл бұрын

Thank you. very good video very informative. Thanks again for all the good information and videos you provide for all the people who like to service their own cars. Blessings🙏☘️🙏

@PowerStrokeTechTalkwARod 2 жыл бұрын

Pppppreciate chu

@carls2210 2 жыл бұрын

Man, these videos always seem to come at the right time.

@PowerStrokeTechTalkwARod 2 жыл бұрын

Lmaooo rightttt

@scha0786 2 жыл бұрын

Love your content!!!! I have a f350 with the m275 and did not know about that drain plug bolt!!!! You just saved me tons of time and frustration.

@PowerStrokeTechTalkwARod 2 жыл бұрын

I got chu

@charlesmiller7139 10 ай бұрын

Wish the sterling had one. They should all have it. Cheapskate companys.

@markpedata7425 5 ай бұрын

I noticed that comment too. So just pull out the bottom right bolt and it will drain? Then you just put back and torque to what spec? Need a new crush washer or anything? Thanks

@rangervapes571 2 жыл бұрын

I use a scraper or a stiff drywall mud spreader to separate the dif cover

@sandman6298 2 жыл бұрын

Just had to look and see, 275 Dana 20,250,7.3 tremor. An excellent truck i might add.

@Flyingdoc74 2 жыл бұрын

Thanks Arod! All this time I have been pulling the cover off of my 2017 F250 with the Dana M275 to change the fluid. That’s not happening anymore. 👍

@PowerStrokeTechTalkwARod 2 жыл бұрын

Gotchu!!!!

@vince5506 2 жыл бұрын

Great info Arod! I had to run out and look under my truck to see which Axel I had 🤣. Now I know - the Dana 👍🏼

@PowerStrokeTechTalkwARod 2 жыл бұрын

Ur my fav, can always count on you to go investigate🤙💪

@robertmcleod2323 2 жыл бұрын

I'm running royle purple 75w 140 and the aluminum cover from a 2008 super duty on my late 99 with the 10.5

@clittle1559 2 жыл бұрын

To the DIY none mechanics start by hand threading the bolts before applying and electric/air tool .im not the weirdo pointing out mistakes hes a professional mechanic and has a feel for his tools.🤘🏽

@CrucesNomad1 10 ай бұрын

Kudos to you for using scotchbright and razor to clean. I would also suggest a runner gasket if you change oil often.

2 жыл бұрын

Aaron. this is very nice information of what type of axels and oil they use in the different trucks

@PowerStrokeTechTalkwARod 2 жыл бұрын

Thanks homie

@fishing4dinner 2 жыл бұрын

Excellent content. Very helpful. New sub from the Texas Gulf Coast. Keep it up!

@PowerStrokeTechTalkwARod 2 жыл бұрын

Thank u, we work very hard. You TX boys show thee most LOVE. Gotta check out our kill switch kit we have for these things to keep that truck urs!!

@fishing4dinner 2 жыл бұрын

@@PowerStrokeTechTalkwARod Indeed! Appreciate it amigo!

@jmbennie 2 жыл бұрын

What intervals do you recommend to change fluid in the rear and front axles? Transfer case? Awesome videos. Everyone smash that like button for the Powerstroke guru.

@PowerStrokeTechTalkwARod 2 жыл бұрын

🙏🙏🤙🤙 50-60k

@bp1798 2 жыл бұрын

That 2020 f250 with the dana is a nice looking truck.

@horlandomartinez93 2 жыл бұрын

Good video ! Just got little confused on the fluid type. All 3 different rear axels take the same 75w 140? Or the 250 with the high towing package uses different? I have the f250 with the high toe package. Thanks

@KratomSyndicate 2 жыл бұрын

Just put a banks on my 2017, the o-ring seal instead of gasket caulk was different. I used the 75W-140 Amsoil serve gear full syth. Supposed to fill to center of sight glass which was only about 2.9 qts for me. Was almost thinking of removing the nut on back diff and fill to top and then see if it's in center of sight glass. They have some fine print on the diff that says use manufacture recommended amount of fluid even if not center of sight glass.... so idk.

@herveyforward5956 2 жыл бұрын

Use the original side fill it will be just below center line. I also bought gold fill plug Magnets seen on Don Smiths channel. They are strong pick up much more metal.

@ryanwongfishing2695 2 жыл бұрын

Great informational video. Thanks

@IIIsticksone 2 жыл бұрын

I hit mine from the opposite side on the top. There are two indents that allow you to hit the cover.

@MsFrankbentley 7 ай бұрын

Thanks for the detailed vid. Very helpful

@herveyforward5956 2 жыл бұрын

If I had the HD Axle like your truck on my duty I’d leave it alone as you have the drain plug and easy fill. For services on the Sterliing I did install the Banks cover. Love the sight glass drain plugs fill plug and no more silicone!!! Of course you know as a Amsoil dealer what gear lube I use. And Gale Banks was so impressed with its performance he now ships the cover with Amsoil. Unless you wish to delete it on the order I think you have a couple pics I sent you AROD. I get a kick at fuel stops towing that cover it gets noticed. Looks good better yet performance cooling while towing is a benefit.

@PowerStrokeTechTalkwARod 2 жыл бұрын

Love it

@BC08 2 жыл бұрын

That Banks diff cover is the only one that has has had more than an iota of thought put into…. other than the stock one.

@Brandonpowerstroke 2 жыл бұрын

250 here with the high capacity tow package!

@jerryknorr679 2 жыл бұрын

Thanks for sharing this with us ARod very good. Thank you

@garyoakley2257 2 жыл бұрын

Great info, as always!!!

@PowerStrokeTechTalkwARod 2 жыл бұрын

Thnx pal!!

@mr_big_pea_pea4013 2 жыл бұрын

So glad i bought BANK’s Rear cover for my truck! Never have to remove the cover again and hopefully it will lube the Pinon like Banks claims too!

@micdrew84 2 жыл бұрын

I just got mine in but chose not to get the amsoil bags. I have the Dana rear. What fluid did you go with?

@PowerStrokeTechTalkwARod 2 жыл бұрын

I use what the dealer sells & that is Mototcraft but if the customer brought his own I would have used that

@rdp2370 2 жыл бұрын

@@PowerStrokeTechTalkwARod I have a Dana 80 in my gasser 14 F350, my dealer gave me 75w-140 and told me that Ford made an update from 75W-90. Will it be okay to use in my 80?

@PowerStrokeTechTalkwARod 2 жыл бұрын

Hmmmm

@rdp2370 2 жыл бұрын

@@PowerStrokeTechTalkwARod , not sure I like that one.. let me know before I make the change if you can..

@mr.s7059 2 жыл бұрын

💪💪🔥🔥 time to upgrade that diff cover to a BANKS

@willb7975 2 жыл бұрын

Thanks for the vid ARod. Completed front D60 and M275 rear service on my '17 F350 at 40k miles, early and preventative maintenance. Used Valvoline Synthetic 75W140 rear and dino 80W90 on front. Scored using a lubelocker gasket for the D60 vice gooey stuff. Lesson learned on M275 cover, used stiff painter's blade to break sealant and 12pt socket + breaker bar for bolts. Some still had uncured sealant at tips. Looking forward to pinion seal vid - had to do this on my '06 F350 a few years ago. Unsure if I am bought into Bank's diff cover, based on how many trucks are on the road with OEM covers and price point. Banks cover versus HSM upper/lower fuel filter solutions.

@PowerStrokeTechTalkwARod 2 жыл бұрын

HSM!!! GOT their videos coming soooon

@sammiskie1127 6 ай бұрын

Just an fyi for future on the m275 u don't need to pull the cover to drain . Bottom bolt on right is the drain plug according to this vid.

@efaraday4 2 жыл бұрын

Another great video! How about a video of a drain and fill on the Superduty 10 speed. I’ve read the procedure document but it would be nice to see a professional do it first.

@PowerStrokeTechTalkwARod 2 жыл бұрын

Buddy, it is coming!!!! So excited for you all

@charlesklippel92 2 жыл бұрын

Good job love your videos

@davestewart9146 2 жыл бұрын

Great video 👍😁

@Imwright720 10 ай бұрын

I might of missed it but always pry at bolt holes. If you bend it a little the bolt will pull it back down.

@Itsa_Mea 2 жыл бұрын

You got me. I was saying right off the bat, Step 1. Order BANKS Cover kit with Amsoil bags of gear oil. 🤐

@PowerStrokeTechTalkwARod 2 жыл бұрын

Lmaooooo

@christopherwilliams4647 2 жыл бұрын

The ford 10.5 and 9.75 haven't changed internally, and ran fine with 75w140 for years. I have a surplus of amsoil 75w140 I plan on using on my 19. I'm guessing the 75w85 is for fuel mileage?

@novo9756 4 ай бұрын

Just changed a 2013 with 250000 miles. Has the 10.5 and looked exactly like that 17 I was surprised truck hauls everyday aswell

@ford77410 2 жыл бұрын

Thank you for another great video but could you please made on on how to service these new 10 speeds?

@PowerStrokeTechTalkwARod 2 жыл бұрын

Its in the works pal

@hgoff5617 Жыл бұрын

Great vid. What kind of Motorcraft silicone are you using? What I'm seeing on Amazon says for 7.3

@matthewfort3740 2 жыл бұрын

Did both fifa's at 100k useing ford oil . Got it at my local ford dealership under my vin number. I did the transfer case to . But was told by them that ford no longer uses the transfer case oil but the auto transmission oil.

@PowerStrokeTechTalkwARod 2 жыл бұрын

Yepp

@bengesell Жыл бұрын

Alrighty. Motivated. Heading out to the driveway with a ballpeen hammer and flathead.

@adambowers496 9 ай бұрын

All you need is a hellwig helper and a lower gearing set like a 4:10 4:30 4:56 etc and you can tow just as much as the Dana 275 rear i do juat saying

@jasongriffin1127 Жыл бұрын

This is another phenomenal video. A true artist! I guess I only have a 10.5 Sterling. And a weak payload -towing capacity. Might as well have a 1/2 Ton suspension in my 22 250 Lariat. 😢

@codyphillips48 2 жыл бұрын

The axle specs is great info

@PowerStrokeTechTalkwARod 2 жыл бұрын

Thx pal

@DJPereira2012 2 жыл бұрын

Got to service the Diffy in the duties.

@jdl1276 2 жыл бұрын

holy hell this job would suck laying on my back in the driveway.. First time I changed mine i put an aftermarket cover on, now i have a fill hole, drain plug and a dipstick. just like a regular oil change.

@terrydtdi 11 ай бұрын

Arod, could the 2017 M275 Axle, be a direct swap with the Sterling 10.5, providing both have the E-Lock. I already have the f350 rear springs swap in my 250.

@TK2HOTSHOT 11 ай бұрын

Hi ARod, I'm getting a great amount of knowledge from these videos, thank you very much. Question: do the F-350 and F-450 use the same rear Diff covers?

@PowerStrokeTechTalkwARod 11 ай бұрын

Thank you, no sir they are not

@toyehooks8239 10 ай бұрын

If I have the locking actuator, you said I don’t have to, but can I still add friction modifier or no?

@paintendaveextremecollisio8057 2 жыл бұрын

Great Video. Thanks

@PowerStrokeTechTalkwARod 2 жыл бұрын

U bet

@clittle1559 2 жыл бұрын

off the topic but I frequent the ford parts dep for service products and cetane booster. I picked up the upholstery cleaner and wow does that ever smell terrible.. awsome videos

@PowerStrokeTechTalkwARod 2 жыл бұрын

Lololol

@1bad335i 9 ай бұрын

Hey what diff oil does your truck take The one with ELD 3.55 also what does the front differential take ?

@armedprophet3321 2 жыл бұрын

Everything I have is yours nephew, but you keep your hands out of my honeypot…lol

@hikerJohn Жыл бұрын

What about the 2010 F-250 Super Duty. You have to pay to get a build sheet with the VIN and they dont tell you what you get with it. This truck has 3 leaf springs, mine has 4 but the window sheet says 12.5K trailer tow hitch. I also have the 3.31 ratio limited slip differential that has a ribbed aluminum looking cover

@D4x4Bronc 2 жыл бұрын

I like the smell of gear oil. Need more info on the new m275 and m300 vs the 10.5 and Dana 80. Does the f450/550 use the m300?

@PowerStrokeTechTalkwARod 2 жыл бұрын

17 & up M300

@ryanbrown918 2 жыл бұрын

I've got an Aluminum Heat-Sink cover on my 2011 F350 6.7 that is factory. Which rear diff is this off the top of your head? BTW...Putty Knives work wonders on oil pan and diff cover removal without damaging sealing surfaces.

@PowerStrokeTechTalkwARod 2 жыл бұрын

10.5

@Plandrew 2 жыл бұрын

Question about these diff cover jobs: what do you do when the labor time is less than the amount of time it takes for silicone to dry? I get these as waiter appointments a lot. The boss and the customer in the lobby want it done in the book time. What's a tech to do?

@PowerStrokeTechTalkwARod 2 жыл бұрын

You pay book time you get a job that would & could come back. Those jobs, aren't a waiting around kind of job. If he wants that, than maybe your store isn't for your fast paced customer. However your boss man is going to have to explain to our honest hard paying customer that it would be in his best interest to drop the truck off & pick it up later in the day, no if ands or butts. You can't rush this shit na mean...???

@Plandrew 2 жыл бұрын

@@PowerStrokeTechTalkwARod thanks for taking the time to reply! I like your content and appreciate that you always keep it real

@PowerStrokeTechTalkwARod 2 жыл бұрын

🙏🙏🤙🤙

@curtisbull1583 2 жыл бұрын

One more question, why the silicone instead of a paper or cork screw type gasket?

@PowerStrokeTechTalkwARod 2 жыл бұрын

Cork old newwwws

@timallen1262 Жыл бұрын

I have the Dana M275 on my 2017 F350 with the drain bolt. Went re-installing the drain bolt, should I use some kind of sealant on the drain bolt and if so what would you recommend?

@PowerStrokeTechTalkwARod Жыл бұрын

U cld use some PTFE sealant

@TidalWaveDan 7 ай бұрын

8:13 a man of culture, I see. Iykyk💯

@666_Jesus_sucks Жыл бұрын

Where can I look up my differential by vin? Please help this is all so confusing 2021 f250 6.7

@therealj.s.c.6684 Жыл бұрын

I have a 2006 Super Duty 6.0 four wheel drive can you tell me what rear I have???

@harlinkerney8625 2 жыл бұрын

A thick blue shop paper towel would probably be pretty good to fold up and soak Up the remaining oil in there. What do you think??

@PowerStrokeTechTalkwARod 2 жыл бұрын

Sure

@mikz86ta1 2 жыл бұрын

Didn't some DRW F350's (2016ish) come with a finned aluminum cover stock? In which has a drain plug.

@PowerStrokeTechTalkwARod 2 жыл бұрын

Yes

@Geekdiymechanic 2 жыл бұрын

I’m having issues finding out what I need. I have a 2007 f350 powerstroke with a 37 axle code on sticker. 3.73 non limited slip. I’m pretty sure it is. Dana 80. What fluid do I use? How much? Friction modifier?

@PowerStrokeTechTalkwARod 2 жыл бұрын

I mean it is in the owners manual

@stephenperkins5492 Жыл бұрын

First time changing diff fluid. 2017 f350 dually. Should I use a gasket or the silicone?

@PowerStrokeTechTalkwARod Жыл бұрын

Depends on your cover. OEM silicone as u saw here. Banks diff cover, they use a gaskeeto

@Victorbanda1234 5 ай бұрын

I just got done pulling my rear differential cover, have you come across oem gaskets on the newer trucks? My rear differential cover did not have the ring on the outside but instead it has a metal spacer with a built in rubber gasket. Kinda neat and looks to be reusable. My truck has the same diff as the one in the video! No signs of sealant anywhere.

@PowerStrokeTechTalkwARod 5 ай бұрын

Yepp some had that. 10.5 sterling tho

@FlatPlaneCranky 2 жыл бұрын

Amsoil joose in every oil container on my Plati!!

@ballacii 2 жыл бұрын

Hey Arod, everywhere im searching online seems to recommend 75w-140 for the 10.50 sterling axle. I stumbled on this video after I changed my rear axle fluid and I used 75w-90 mobile full synthetic. Would that be fine not being 75w-85?

@PowerStrokeTechTalkwARod 2 жыл бұрын

All my info was a per Ford spec

@christopherwilliams4647 2 жыл бұрын

You'll be fine, the diffs haven't changed internally and have been running fine with 75w140. The 75w85 is for fuel mileage.

@SegoMan 2 жыл бұрын

Does this have the metal repairing nanobots in it to fix the faulty axle tubes????

@PowerStrokeTechTalkwARod 2 жыл бұрын

Thats the funniest shit ive heard all day 😭😭😭

@parkerl1215 2 жыл бұрын

So if I have the ELD in the rear axle I don’t need friction modifier?

@PowerStrokeTechTalkwARod 2 жыл бұрын

Correct!!!

@kgsstudiosfineart 6 ай бұрын

I have looked at the front and rear diff change videos and wonder if using vacuum to remove the fluid from both is not a better solution, especially for the front? I have a twin shock steering stabilizer on the front and would love to have confidence that a vac suck and refill would work properly. 2019 F250 6.7. I want to consider Amsoil, too, so your thoughts would be most appreciated.

@PowerStrokeTechTalkwARod 6 ай бұрын

100% not everyone has that option

@kgsstudiosfineart 6 ай бұрын

@@PowerStrokeTechTalkwARod Thank you. I have a sloping driveway and at work I can't make a mess. I think I could sneak a sucker in and get the job done in the work parking lot but there would be no time for curing of RTV. I have to change the power steering fluid on this one too. Do you think that the suck, turn lock to lock, replace, then repeat until clear is a viable solution for Alumiduties as well. Thank you for awesome help and support for the powerstroke clan.

@jasonholland4162 Жыл бұрын

Arod - there’s a hose connected to the drivers side of the rear dif. What is that for? I just found mine disconnected at the other end on my’ 17 F450. What should the other end be connected to? Thanks

@PowerStrokeTechTalkwARod Жыл бұрын

It is a vent..

@MnNorthernRedneck 2 жыл бұрын

Great video! I was wondering if you have any experience/thoughts on Banks Power's Diff Covers? Also, I am curious if you know whether or not the 2020+ upper oil pans fit earlier years and if the new design actually works?

@PowerStrokeTechTalkwARod 2 жыл бұрын

I have not. No it will not

@MnNorthernRedneck 2 жыл бұрын

@@PowerStrokeTechTalkwARod Dang. Thank you!

@r.l.28 Жыл бұрын

Just a heads up, my 2015 DRW F-350 does not have a Dana 80. Axle code is 3L I believe it’s a sterling 10.5

@PowerStrokeTechTalkwARod Жыл бұрын

Yes.

@mustanggeek8333 Жыл бұрын

I have a 2013 F350 diesel with the locking diff. What would happen if I did use the friction modifier?

@PowerStrokeTechTalkwARod Жыл бұрын

Probably nothing

@BeardedFordTech Жыл бұрын

I can literally smell this video

@PowerStrokeTechTalkwARod Жыл бұрын

I smell u

@BeardedFordTech Жыл бұрын

@@PowerStrokeTechTalkwARod that's what I was going for.

@howtoaroundthehouse7596 Жыл бұрын

Brother, please take the fill plug out first before draining. It’s a bad day if you drain, then put all back together just to find out the drain plug is seized or rounded out. Been there once. Never again.

@randallsheldon3066 4 ай бұрын

Hey Arod how do you feel about fel pro gaskets for the rear differential

@PowerStrokeTechTalkwARod 4 ай бұрын

I'd pass...

@The3055520 Жыл бұрын

2014 F250 SRW with the Sterling 10.5 ELD. Took mine into local dealership for a transfer case seal leak. I’m going to have them service the rear diff too. They said when they service these they just suck the fluid out of the fill hole, then refill. Is that ok? Or should they be fully removing the diff cover every time? Thx

@PowerStrokeTechTalkwARod Жыл бұрын

Thats ok too

@-R_H Жыл бұрын

What do you think of those lube locker gaskets for the 10.5 vs the TA-31? Thanks

@PowerStrokeTechTalkwARod Жыл бұрын

They coool

@-R_H Жыл бұрын

🤜🏻💥🤛🏻

@ai8438 Жыл бұрын

What are the torque specs for fill hole and pan bolts?

@PowerStrokeTechTalkwARod Жыл бұрын

Tight

@gobdeep 2 жыл бұрын

Got this project with a Banks cover lined up for this weekend. Looking forward to it!

@PowerStrokeTechTalkwARod 2 жыл бұрын

Damn skippy

@4040pmora Жыл бұрын

Forgot one! The brake line bracket. LoL Sorry had too. I forget it all the time.

@scottjaskulski8350 2 жыл бұрын

I have a ford sterling without a locking rear could you add a factory locker or would you go with a limited slip like detroit truetrac

@PowerStrokeTechTalkwARod 2 жыл бұрын

I have no idea

@scottjaskulski8350 2 жыл бұрын

@@PowerStrokeTechTalkwARod thanks

@marshallforeman2051 Жыл бұрын

It tastes a lot better then it smells

@johnwilson5320 2 жыл бұрын

my 2011 has finned cover on it. what up with that? not complaining but , it quite different than what you've explained.

@PowerStrokeTechTalkwARod 2 жыл бұрын

Was an early thing

@bengesell 5 ай бұрын

Howdy Arod. Great vids. I have the 2017 6.7 PS F-250 with the 3J axle code. Gear ratio is 3.55:1. Currently has the stock LT265/70R17 E121/118R tires on it. I want to upgrade my tires to something bigger. (I already have the BDS leveling kit on it.) 35s are what I'm thinking, but after doing some math, am thinking that 35s would be too big for my 3.55:1 gear ratio in my axle. Should I just get 33s or do you think the 3.55 can handle a bigger tire like a 35?

@PowerStrokeTechTalkwARod 5 ай бұрын

I think you're getting too techincal, yes youll be fine

@atm1513 Жыл бұрын

Hey uncle elroy, What capacity is the 2 post lift you use?

@PowerStrokeTechTalkwARod Жыл бұрын

18k

@scottkenney7823 6 ай бұрын

I love the smell of burnt gear oil don’t forget warranty on older super duty to synthetic gear oil if you can’t get it all GET SOME!

@davemccage7918 5 ай бұрын

I love the smell of gear oil in the morning. But I’m Slavic & Scandinavian, if you smelled some of our seafood dishes you’d probably understand why I don’t mind diff oil.

@PowerStrokeTechTalkwARod 5 ай бұрын

@davemccage7918 🤮🤢

@freddhobson3478 2 жыл бұрын

Fred H. 2019 f350 6.7L 102,000 miles I need to change the rear diff fluid but the 75w85 hypoid synthetic fluid costs $36 a quart. What makes this stuff so much more than other fluids?

@PowerStrokeTechTalkwARod 2 жыл бұрын

I duno bud..havent loomed into that

@christopherwilliams4647 2 жыл бұрын

Fuel mileage