I'm furious I've not seen your channel before. This is truly brilliant work.

Practicing some of these processes myself at the moment. This is a beautiful thing

Beautiful Bila! From my understanding and what I've seen and own. All of the Swedish made collared axes were hand forged from multiple pieces forge welded together. They also werent produced much after the turn of the century, about 1920 is the cutoff for them from my understanding. Finland on the other hand was industrializing its collared axe production at the same time Sweden was going towards a western style. Finnish kirves were forged in open dies like Gransfors uses today. An iron body with a welded in high carbon bit. Other than the very old Bila/Piilukirves, I haven't seen many hand forged Finnish axes. I would say their most different feature is the sloped top of the blade and the angle at which it meets the collar. Swedish collared axes are typically 90° or close to it, Finnish axes tend to have the blade angled in towards the collar in an obvious way.

Very fun video. Thank you for taking all the time to record and share this with everyone. I have been interested in these multiple part axes for a while and it’s interesting to see all the weld joints.

Tack för en verkligen bra video. Mycket uppskattat och inspirerande. 👍

Great piece of art. The fusion of the different parts and especially the forgeweldings are inspiring

Oh my. I am getting to forging multipart axes (and knives and such) myself again after three or so years, but oh my, this one is so very complicated, yet beautiful. I think I'll have a go at making a collared axe someday, hopefully soon.

Absolutely awesome!

Oh, and on topic of birch for haft material - I think that is part of the reason for why the collar is there in the first place! When I was travelling Finland, the majority of trees were birches, spruces and pines, and out of those I'd absolutely pick the birch. And the long collar means more wood is "gripped"/supported by the eye, working around using comperatively softer wood. That's my train of thought, anyway!

Loved this video! just starting to learn knife making, forging and heat treating is tricky!

Man ripped a log!!! Heck yeah dude

Good on you for tackling such an incredibly difficult forging! I like the honest self critique at the end, that’s how you get better as a craftsman.

Awesome. I really appreciate it, thank you for sharing and taking the time to produce this video. All of your work was taken in.

That’s one heck of a blacksmith. Great job and great video.

Beautiful axe and great insight into traditional forging techniques.. thank you!

Beautiful work. Love that handles grain

that is a quality axe right there heirloom quality very well made

Beautiful work Nils!

Thank you for sharing a great video with your amazing and fantastic videos.

Fun to figure out how the masters done it. Thanks, I did not ever see a collar axe, And I don't claim to know it all but do love seeing tooling and history, Thanks and thanks for the extra information Sir thanks

Great video, great welds, great axe.

gran video, me encanto esta hacha, es una obra de arte, y el que no hayas unido las partes con soldadura antes de forjar, fue excelente!, bastante informativo el podcast del final, primer video que veo y ya te ganaste un suscriptor, espero ver mas cosas grandes de ti, contigo aprendere mucho, saludos desde venezuela!

Your attempt, You nailed it figured it must surport the axe . I'm still messing trying to forge weld. But after some advice I trying again this week. Love your videos, Thanks Also the speaking at the end Thanks

wow that first sheet made from that bar ..man I like that

The axe is brilliant. The handle looks awesome!

Beautiful!!

Bra jobba!

Nils ..!!! Exelente...!! 🙏🙏😀

Has to be one of the coolest axes i've seen and definitely going to have to make something like it! Thanks for the inspiration

Obra de arte...maravilhosa esta ferramenta Parabéns você é um artista da cutelaria Brasil

Looks good. Awesome skills. I think the finnish used house axe contruction. Where you need to have 4 pieces of mild steel and one piece of high carbon steel. 2 mild steel pieces for the side, one piece for the rear sandwich, and one piece for the middle, leaving 2 gaps, one gap for the eye and other gap in the front for carbon steel insert.

Awesome job please keep making movies of your work.

keep it up love stuuf like this keep it up nils

I dont comment on videos... but this guys forge welding is on point and handpowered ... great job!!

Great visual documentation and great narrative explanation at the finish.

Respect very nice job nice handle lightweight axe fantastic long beard. Nice weapon to enter Valhalla. 🤘🤘🇧🇪🇧🇪

Muy buen trabajo te felicito desde España

That's a great idea you have setting up the shop-vac under the grinder. I'm gonna have to steal that page out of your playbook for sure. Awesome work and video!

Amazing axe!!! Beautiful workmanship end to end!!! Blessings to you and your family 😇

Lovely build! Those are some complicated forge welds. The discussion about Swedish vs Finnish style made me go out and actually look at my hewing axe restoration project that I was supposed to do something with forever ago. And made me realise that the axe I have flying around here is more than likely a 1-handed variant. Also made me realise that it is an axe head from a Swedish speaking area in Finland. Outside of a different blade shape - this one is leaning backwards quite a bit - the major difference seems to be a rectangular eye thats tapering down to the end, so probably wasnt wedged. Also at least now lacks a boss on the backside. There's a lot of mushrooming in that area, so it took some abuse. The way the the collar and the blade were attached seems more or less similar to your way of doing it though. Now the differences are probably coming down to different era and the fact that its a 1-handed axe in my case, but they were still standing out to me

Hello, I admire your manual work. Greetings TeamSpawtech from Poland.

Good job. Seems to be durable. That curly birch handle is really nice. Loved to watch you vid. Congrats.

Kult å se hva du kan lage👍🏻 Fortsett med å lage kule økser👍🏻😃

Awesome 💪🏻

You are a great gunsmith blacksmith

Great work Bro ! 💪

I think you did a fantastic job and did a great job on the video I always wondered how they managed to draw down such a long handle socket well done 👏

Totally awesome n sweet

Good work and worklog! Liked that you made the most of authentic techniques! With respect from Russia!

I would so take that into battle. Cool axe dude, amazing

Здравствуйте ! Очень интересный получился топор !

I think they would have pinned the pieces together and then forge weld it. This technique was used in complicated forge welds.

Great job, it looks fantastic, as always love the content and keep up the great work.

Good job!👍🏻

Nice one very good job, all the best for you.

Well done

I like your "Reckless testing". Well done.

Well done.

I like the shape of the edge and the upper part of the handle with the iron parts serving as a guard for the wooden handle. That looks so good. Can't wait to forge my own axes, but stay with the punched eye, until I am more confident with forge welding.

Хорошая работа. Скандинавы знают своё дело.

Really enjoyed the video Nils and the commentary about the build afterwards. That's important to us Noobs. Been following you from the ForgeCast, seems like you are starting to hit your stride. Keep up the great work.

Thank you wery much, I learned a lot of usefull information)

Another great video, thanks

Beautifully done. If your parts are slipping before welding and you don't want to tack weld, try cutting a few "barbs" into the insert with a chisel so that it bites a bit when heated and you should find they stay in place a bit better. Skal

Brilliant result mate. That is one great looking axe . Well done.

Great job! Particularly fort your first try.

Beautiful Axe Nils.

Awesome build man. Your reckless test drive turned out better than my carefully planned builds. Great to see such a complicated process.

Nice work!! That handle really looks amazing.

Fabulous handle grain, and a very nice looking head... Subbed here!

I'm not one to talk as I've never forged anything this big but I've seen a lot of really good smiths chisel in barbs along edges that fit inside another piece of the metal to keep the parts from slipping during the forge weld. Hopefully that makes sense. Look at black bear forge on youtube. He has a trade axe/tomahawk video where he uses the technique. Anyways awesome axe, the handle wood is amazing!!!

Very nice

wow that came out amazing thanks for sharing wouldnt it be easier though to assemble it all flat then bend the final side of the collar over at the end?

Awesome job man. Great work

Nice work Nils, just subscribed! 👍

I love this

Beautiful work! You killed it! I wish my forge was big enough for me to attempt things like that. Maybe someday.

Very cool

Awesome vid!!!!🔥💪🏻⚒

Grymt!

Interesting design and build. I hadn't seen one made of as many separate pieces before this, but it looks like it turned out very well. Most of the used Bilnas axes I've seen on Ebay have very distorted/mushroomed polls, so I think the piece of steel used there is a good choice.

1:00 Subtitles: [music] 1:19 Subtitles: [Laughing]

This was a very satisfying video to watch, I have no smithing experience, but liked how the front was all video, and then you finished with a comprehensive explanation of your project, I thought you did quite well, especially after learning this was your first time making something like this Of coarse each next time will give you a much better intuition to work with from practical experience to guide you.... as for the Swedish/Finish differences, I also have no knowledge, but wonder if it was nothing more than regional pride and bragging, if both styles are relatively equal in function and reliability... thank for a great video!

Очень понравилась ваша работа!

New sub and amazing video mate :) keep up your amazing work : D

Mình là người Việt Nam nên không biết tiếng anh ,mình thấy bạn làm các mẫu rìu rất đẹp mình rất thích , ở Việt Nam không có ai làm các mẫu rìu như bạn cả níu có thì phải đặc làm mà giá tiền công rất cao☹

Your axes are so pretty man. Edit : it did look really tricky to forge, the design is seemingly quite complicated for an axe, considering its in 3 parts.

What does sprinkling the borax on the metal do during the forging process?

Snyggt, riktigt häftigt att följa denna process!! // Rickard H

Awesome Video! I would like to learn to forge. Any tips for beginners?

Eye socket is deep!

Nils,you've done a Really good job on this,for the first time-especially,right on. The "book" that you mention-is that Lars Enander's? Have you by chance heard of a gathering of axe-smiths in France,last year,on the subject of this very or a very similar axe-code named "1700"?If not,look to see if maybe Jim Austen has written something about it(he was the chief presenter),but lots of good smiths were there,Terje GranaasMathieu Colette,et c.Maybe look up Mathieu's page,it has some photos of 1700 construction on there somewhere:facebook.com/Taillanderie-Claudel-609826759129934/photos/?ref=page_internal I cannot speak about the differences between this Bila and Piilukirves.They're Very closely related without any doubt(and both probably related to their common ancestor,some sort of Germanic "goosewing" type socket,which also had 2-3 or even more variants). I'd say that a big factor would be the type of local ore,and charcoal,and also socioeconomics(how much time/resources people could dedicate to refining steel).One-piece socket like you did(typical for Sweden)takes some Very clean,And highly refined iron. Possibly things in Finnmark were a bit more difficult with this.Also,their construction techniques were a bit different also,like hewing the vertical faces on logs after the walls were up...

Great work...check with Roy Underhill on design. He's very knowledgeable.

That was an AWESOME build. Different approach than some i have seen, but GREAT execution. Well done. Thanks for sharing. What steel did you use?

Did he chisel the surfaces he forge welded?

Really good work. Good to see a fellow scandinavian hard at work :) im impressed seeing you forgeweld those difficult and complicated pieces :) keep it up :) where did you get the wood?

Om du har några böcker att rekommendera om yxor och yxtillverkning vore det jättetrevligt om du kunde tipsa? Hälsningar från Finland. Mitt mål är att göra yxor som detta nån dag. Yxan blev jättefin

What wood is that? Is it sturdy? Good video

In my opinion your doing fine. And I respect your opinion on the handle material, ash or hickory would be stronger. Great video

I just found your channel. I'm very impressed. I'm a novice smith at best. You were asking for ideas...Have you ever made a Siberian Yakut knife? Please research it. It at 1st disgusted me since it is asymmetrical but I decided to try my hand at it. It has grown on me. I want to explore the design more. All the best from Oklahoma USA, John.