Forging a Touchmark // A Makers Mark for the Blacksmith

Рет қаралды 40,386

6 жыл бұрын

In this video, I'm forging a touchmark. A blacksmith touchmark is a type of makers mark used to stamp onto his work for identification.
If you'd like to see how to make a touchmark stamp, make sure you watch this video beginning to end! A custom touchmark could be used by jewelrymakers and other types of craftsmen as well.
Let me know what you think about this video on how to make a touchmark in the comments below. If you've gone about making a touchmark stamp before, let me know how it turned out!
Want to SUPPORT what we do here at Christ Centered Ironworks Blacksmith Channel?
Visit my channel: / christcenteredironworks
Stop by my website: www.blacksmithpdfs.com
Get some merch: teespring.com/stores/christ-c...
Shop my Amazon Influencer page for shop tools: www.amazon.com/shop/christcen...
Social: / christcenteredironworks

Пікірлер: 81

@theflyingdutchmanforgebjwa2154 6 жыл бұрын

Roy, you always worry and apologize for the length on these videos. You need to stop doing that. Here’s why, knowledge, TRUE, knowledge, can’t be imparted in minutes, it takes time. However, You, have a gift that allows you to condense, effectively, years of knowledge and practice into a video (all while narrating and operating the camera) into a package that’s less than an hour. That’s true talent, and a gift given to you! So please stop apologizing, for a gift you’ve been given. We’re all here to gain knowledge (and speaking in my case at least but I’m sure there are those who share my opinion) take as much time as you need.

@johnjude2685 4 жыл бұрын

Great words ,Sir thanks

@nrgmgmt01 6 жыл бұрын

Nothing beats being on vacation at Hard Rock Hotel in Orlando while sitting at the pool binge watching blacksmithing videos. Gotta love it. Thanks Roy!

@chrisking3169 6 жыл бұрын

You read my mind on this one. I have been meaning to ask you about touchmarks. There are alot of videos out there showing how to make them, but I love your teaching style. thank you sir..

@captobvious9596 4 жыл бұрын

I greatly appreciate the in depth video. Most others are 4-5 minutes and yeah they show it, but they don't EXPLAIN it. So thank you for this video.

@marcs4738 6 жыл бұрын

Looks great, Thank you for sharing the process.

@micktait8576 6 жыл бұрын

Magnetic glasses 🤣👍at least you know your eyes are stuck to the job . Classic slip and excellent work mate

@jack5814 6 жыл бұрын

enjoyed your take on the touch mark

@billwilliams1151 6 жыл бұрын

Just made my own after watching this video. Thank you for sharing your knowledge and techniques.

@garygilbert1440 5 жыл бұрын

Nice job, Roy. You were correct about clicking forward, but I did watch most of it. Excellent end product!!

@henriktrulsson276 6 жыл бұрын

Thank you, I really enjoyed this video

@jimshort5906 6 жыл бұрын

Thx for the info brother. I appreciate your willingness to share and teach.

@fauseth 6 жыл бұрын

Thank you Roy!

@davidevans4926 3 жыл бұрын

Loved it!

@Robdontcallmebob 6 жыл бұрын

Thanks Roy, I need to make a new touch mark. Left mine in Indiana.

@boediethebuilder918 6 жыл бұрын

Enjoyed the video I think I'll give it a try

@SableWolfsDen 6 жыл бұрын

Awesome work Roy!!!!

@bob3274 5 жыл бұрын

Roy, I really enjoy your longer videos. I realize this one is over a year old as I write this note so maybe you won’t see it. Additionally, I have a few recommendations. 1. I really enjoy listening to Shinedown when doing tedious tasks. I’m an old school Metal Head so this may not be for you. 2. I use a pair of 3 power or #3 magnification dimestore glasses when doing very small work. You have to mess around a little to get the work the correct distance from your eyes for the view to be clear but they do work very well when the work is the correct distance from your eyes.

@PogyForge 6 жыл бұрын

Thank you Roy

@ChristCenteredIronworks 6 жыл бұрын

+Robert Poglitsch Thank you for watching !

@GeekGuyMJ 5 жыл бұрын

Great video. I'll be making my touch mark soon. Thank you!

@trumanlong1340 6 жыл бұрын

Been struggling on how to make one. Thanks for the video. God Bless buddy.

@gardeninginnorway478 6 жыл бұрын

Splendid video, and a nice piece of work! Been troubling alot with making a small G-letter, and have been forced to file a new surface several times.

@silleluap 6 жыл бұрын

thanks roy

@scottwallingwindyacresiron2654 6 жыл бұрын

Thanks for another fantastic video!! Your teaching style is perfect. I tend to ramble also. My daughter and I are very new to blacksmithing only been at it for about 4 months. We are still trying to come up with a name for our shop. Making a touchmark is one thing we really want to try making. Thank you again for hard work. Proverbs14:23

@jeffcoffey6078 6 жыл бұрын

Very nice

@thesweetestjerk8905 5 жыл бұрын

I skipped ahead exactly to the part where you said "now I know some of you have skipped ahead..." Haha woah.

@ChristCenteredIronworks 5 жыл бұрын

LOL got my eye on you 😏

@davidholdman8015 6 жыл бұрын

Awesome

@kensmapleleafretirement 4 жыл бұрын

Well done, thanks a tonnne for the video.

@sarahmikeg6523 6 жыл бұрын

Great work I made my cross shape makers mark by heating and annealing an old hardened nail setting punch and then filing down the cross shape and rehardening it. It works great. Your makers mark is cool but by being flat blunt shape can it stamp a good impression in steel?

@humeanity2393 6 жыл бұрын

You certainly touched the mark today

@stevedingman474 6 жыл бұрын

In my early 20s I rolled a pretty good doobie !!! That was 30 plus years ago !!!

@johnmccanntruth 6 жыл бұрын

The touch mark turned out really well, especially for having to try and speed it up for a video...

@alexr6113 6 жыл бұрын

Awesome idea now I need to find an old file to build along

@NiclasutanK 6 жыл бұрын

Great video, / Niclas, sweden

@gregsmith3289 6 жыл бұрын

Great video. I have some 01 tool steel. Do you think that would work for my touchmark?

@christopherconkright1317 2 жыл бұрын

Do you know sell touch marks since you got the laser or is it not powerful enough? My touch mark is a bit complicated for had making.

@justinpoff952 6 жыл бұрын

Is there a registry for touch marks so you can be sure you're not duplicating someone else?

@williambatchelor2267 6 жыл бұрын

Thank you for the video! I appreciate you going into detail on the filing of the mark. I have a quick question: How big would you say is too big for a touchmark?

@ChristCenteredIronworks 6 жыл бұрын

+William Batchelor 1/2" is probably the limit :-) thanks for watching

@williambatchelor2267 6 жыл бұрын

Thanks for the help! :D

@timothymoore7890 6 жыл бұрын

Nice video, ironically was halfwah through making one myself. Have you considered making and using a punch to set your cross in the touchmark? Or using the one you've made in the video to punch another piece, then filing up to the edges of the anvil. Leaving your touchmark as an outline, with less material to move in use.

@ScottStClair-dm6vk 6 жыл бұрын

Nicohlsons are made in Mehico now!

@grayem76 6 жыл бұрын

great detail roy looks great thought you were going to dremel the cross in but im glad you didnt as they are out of control when you touch the work

@ohmahgawdfilms 5 жыл бұрын

I may have missed it, but whats a good steel for a touch mark?

@shadowhunter3595 5 жыл бұрын

Just some cheap simple coil spring works well.

@OKBushcraft 6 жыл бұрын

Great job. I definately have a better idea now.

@peterl7225 6 жыл бұрын

This will be very interesting. Only watched 9 minutes. I have (tried) making 2 different touchmarks out of spring steel. I hope to learn how to do letters with holes. O P D and B for example.

@timothymoore7890 6 жыл бұрын

Theres an article on anvilfire www.anvilfire.com/iForge/tutor.php?lesson=jdpunch2/demo which shows an alternate method of making 'internal' shapes

@dheyderjr 6 жыл бұрын

Hey Roy I liked the video and content but why not make a live stream of making a touch mark? Something a little different that you could do as a give away or just as a demonstration so we as fans can ask questions as you work. I know that people will have questions that I'll never think of but some I could see would be the preferred size of a touch mark by you and the ones appropriate for different kinds of work.

@ethanstone717 6 жыл бұрын

Vid on the engraver?

@user-wd3de4nu9k 4 жыл бұрын

Toooop

@brittinghammerforge9441 Жыл бұрын

The ole left handed touch mark

@donaldlemoine6711 6 жыл бұрын

Very cool video! Not sure how you could see it:)

@namentatic4978 5 жыл бұрын

What did you say at 21:10, You will flip 480 degrees?

@Wolfe_Metals_Stacking Жыл бұрын

"Full 180°"

@mooncultwarwitch8400 5 жыл бұрын

Roy, 2 negatives equal a positive so what happens know?

@kimcurtis9366 5 жыл бұрын

Wouldn't it be better to anneal or normalize the steel of the touchmark, to file engrave the touchmark, itself and THEN, heat treat and temper the piece?? If you do that, you wouldn't have to worry about breaking your graver! I have often wondered if there is a REAL reason to do this AFTER it's been heat treated and tempered. Thanks, Roy, I enjoy your videos and learn a lot!

@MrJamesjustin 6 жыл бұрын

Haha, here after I shall know this shape as the 'doobie shape'.

@tobyjo57 5 жыл бұрын

Roy can you make me a personal Toutch Mark Please ? How do we comunicate about it ? Toby

@ChristCenteredIronworks 5 жыл бұрын

Hi Toby, thanks for getting in touch. Roy does make custom touchmarks. If you would like the details, please go to our website www.blacksmithpdfs.com and use the "contact button" at the top of the page. Have a wonderful day, Jessica at Christ Centered Ironworks

@Sam-ik7uz 2 жыл бұрын

About 20 DEG tangential to the top.

@patriciusvunkempen102 5 жыл бұрын

my needle files somhow break very often but that's my issue i guess

@totherarf 6 жыл бұрын

After you put that amount of work into something you want every piece you make to carry ..... why not temper it in the oven? 220C is 429F is Gas mark 7 (or a light straw) which should give a reasonable temper (and not mess up the cooker so you can bob a pizza in for tea while it is on) ;O)

@theswede686 6 жыл бұрын

How to touchmark your touchmark? :)

@bobsimmons919 6 жыл бұрын

Vernier calipers.

@ChristCenteredIronworks 6 жыл бұрын

+Bob Simmons thank you for clarifying what they are called :-)

@lonesouthafricanbear2135 5 жыл бұрын

lol TA hey :D

@harrisgraves592 4 жыл бұрын

No caffeine!🤯 I don't know Man! Lol

@darobbadooz 4 жыл бұрын

Just make a mirror image of your drawing.

@Bangalangs Жыл бұрын

Could have gone with “hand rolled cigarette” and been fine.

@graceyjewels7148 2 жыл бұрын

Thinking about God forging my life and then putting his "strike" mark of ownership on me, made me go looking for the name of a blacksmith's artisan seal. Now I know it's called a touchmark.