Best statement EVER by Greg. “When you start asking questions, people get hurt”. LOLOLOLOLLLOL

Whoever is editing these videos deserves an enormous raise! Outstanding angles and editing on all counts!! I know how hard it is to do. Very impressive!!

Good teacher's, they talk, they explain the thought process. Many people understand that they need an explanation.

A+ for the laser on the story pole.

@10:30, "Greg's pushing in as far as I feel comfortable" 😂

Kyle, your air and water penetration management is impeccable 👌🏻🤌🏻👏🏻👏🏻!

The ceiling tie-in detail is outstanding.

Building coming along. Good job guys.

Two thumbs up for this installment of RR 2.0 😬

No regrets. 😂 Wood generally will bow or twist right at the knots in the wood. Less knots generally mean straighter wood. It also cups when the tree lines are farther apart.

I wish I could have a shop made by you and Greg. I have been following you for a long time now and amazed on what I learned from you.

looking good guys. the air sealing/insulation is fantastic with your attention to detail.

Walls looked real nice before framing, still looked good after. Good Job guys.

Love the banter...

A lot of work. You do a great job of explaining what you are doing.

Man all those free tools…nothing gets dirty !!!…Bravo!!

+1 for Greg with the hearing protection. My hearing is so bad from construction work early in life. Wish it had been a thing back then.

Greg you are doing a incredible job

Brother I have been watching you since you started this channel and no one works harder or smarter than you and Greg, you guys do a great job on all your jobs and I’m so glad to see y’all are doing well. Great work, great equipment and great teachers. Thanks for putting out such good content.

The quality of craftsmanship looks perfect! Can't wait to see what you end up doing from the shop floor to wall transition. That concrete edge looks like a mistake.

Love these videos, awesome shop!

As always awesome video!!

Unbelievable nice it's certainly coming on brilliant work😮

You guys do nice work

“Respect the drip, Karen” dude I’m dying 😂

👍👍👍 awesome guys.

There's a really good This Old House Pro2Pro on KZfaq with Christine Williamson talking about the detail for the bottom of the window. Instead of using spray foam, use backer rod, sealed with caulking to allow water to still seep out.

Kyle, for your wash bay area, you should check out the Obsessed Garage power washing solutions. They're pricey but pretty nice. There's a lot of cost with the water lines, so you could sub in pex vs the fancy stuff. Would cut the cost in half.

Greg has so much patience lol

You two are a well oiled machine!

The amount of money in tape alone on this building has got to be outrageously priced! Also the amount of insulation and a Raynour Garage Door?!?! Clopay or Garaga (out of Canada) best insulated possibilities. 33:44 oh they reached out and “GAVE” you the doors for a shoutout?!?! I enjoy your content, verbiage is key.🇺🇸🙏

Hey Kyle, have you looked into fabric ductwork? It's a pretty clever technology, great for big open spaces like you've got there, and a whole lot cheaper than sheet metal for both time and materials. Other advantages are it's inherently quiet, and you can unzip it and throw it in a washing machine if it gets dirty.

Hard not to be impressed with how well the Majrex lined up with the laser beam! Unless you’ve hung a decent stretch of membrane it’s not easy to appreciate how difficult that is!

I know that you will eventually put more majrex on the ceiling, but it just seems funny to talk about perfectly sealed windows and doors when your attic soffut and ridge caps are wide open to the interior air envelope.

Great video. Looks like you are staying away from the finger-jointed/glued lumber that all of the builders around here have defaulted to.

Your shop is going to be nicer (and 3 times as large) than my house! Also as air (and water) tight as a frog's heinie!

You know who also likes Rockwool. I built my own house and used Rockwool as insulation and small birds like to use it as a nest material. Birds come to take Rockwool from the wall in the spring to build a nest.

Yessah

Too bad you don't do jobs up in the UP of Michigan. Im looking for a post frame builder up there, and leary of what Im finding. I see your work and love the attention to details and the quality of materials you use. If you have any recommendations, they will be greatly appreciated!

OCD wow Craig is a saint.

I want my wood to look good as well. Personal grooming is so important.

I wonder if some staples through the twinet would have made any difference helping keep the air barrier adhered

It’s not a hole in the air barrier unless you remove the fastener. Nice to see how strong twinet is too. That’s a lot of load on it.

Please show how you address the interior side of the Magrex firestopping and draftstopping in the exterior walls. ? I am interested in the inspection process. I have always needed a mechanical inspection before insulation.

I would love to see a cross section of your walls. What will the total thickness of the wall be after siding and finish?

"I'm not drunk I swear" 🤣🤣

Kyle really digging your build. Question a little out of scope. With container homes and builds becoming popular, how would you apply your techniques and knowledge to making it insulated?

Weather has sucked the last 5 days.

I like when you cut the majrex on a window and you actually revile how bad is the weather. Straight downpour.

Looking fantastic guys! What's all the extra insulation hanging out in the background? That R23 Rockwool is really hard to find right now, I'm ready to insulate my rooms so I may have to go with whatever I can find!

Awesome. Work. Are those horizontal 2x6 u put on the wall gonna cause air leaks as u punctured the air barrier??

Great progress Kyle & Greg! And thanks for filming. 😁👍🏼

The Lesson here kids. Dont let your cavity get overfilled .

You should probably varnish the wood since you are also going to get leakage through the wood grain. The varnish will prevent the leakage...

Did you ever weigh the cost of materials and time for air sealing compared to spray foam for insulation and air sealing?

I knew the BLOWER DOOR TEST was coming..lol

Is it possible for you to make a VIDEO with TOOL stuff like the Pencil you are using, the length and size of chain / tie-down straps and the best way to use them - like where you place them to pull the framing into place. I will be building my first "personal" Pole Barn this summer. I want to and hope to do as much as I can with the help of some friends. Thank you, Tony

QUESTION; why are using paslode instead of Milwaukee framing nailer?? Paslode is louder and I know m18 is heavier. The shop is awesome love seeing materials you use.

Is Greg going to get his own office space in this shop?

👍

Would a stiffener "T" made it more stable?

It’s always best, when using double backed adhesive tapes, to use a silicone roller to install them. For some reason people think they can just rub their hands over it and get full adherence. Guess not. And as far as putting too much rock wool insulation into the wall void, why?

Can you run the vent pipe through the wall and not put a hole in the roof?

After all the air sealing, what are you going to do with the roll-up door?

Curious if using 2x4 or a 2x6 combination for cost savings. Instead of all 2x6’s.

Mechanical for exchanger after blower door test? If the buildings too world of problems

Great looking work. This building is going to be so air tight it will need a sign by the doors "If you need to pass gas please go outside."

Would it in any way shape or form been a good idea to stagger the girts? To not have the joint on the same studs.

Nice! How much insulation is going in the roof?

Nice solution with the L beam…

So with the Rissan tape being put on 'backwards' is that going to cause any issues with air movement, as in is it designed to move both ways? Wouldn't want you to have an air infiltration/potential cold/warm spot for mould to form. Thoughts?

Even the drill has lights for TV

Is it an absolute requirement that the vent pipe MUST go through the roof? Seems like it would be a better option to dump it out under the eave (especially since there are no operable windows nearby), and not add a roof penetration after the entire roof system has been installed.

What track saw are you guys using to cross cut your 2x6s? I've only ever seen the Festool that looks like that with an attached track but it didn't look like one.

SIGA needs to make Rissan corners

looks kinda big for a shop. i mean the height is like more suitable as a 2 story building. what will you do with all that space?

how long is the adhesive on these different types of tape you guys use meant to last? I could never trust it for a “lifetime guarantee”

Who makes that can shaker you used?

What tool is that what you are using at 19:54 for shaking the foam? Who is the manufacturer of that? Do you have a linek where to buy that? Thanks

May post framing builds be used in city areas like nj, nyc? Is it something that can be used for mutilfamily houses? Sorry if someone has asked before and you answered. I watched a few videos and I I haven't heard you speak on this. Just curious. TIA!

What part of the Us are you located? Nice job.

So what's going to stop those 2x6 from bowing?

First rate work, but there is more tape in this building than most other buildings have lumber. I'd lose my mind fussing over things at this level.

So badger vs diamondback. Which is best?

Do you guys do work in southeastern Wisconsin?

What boots are those ?

Ya really need to be in touch with a local mural artist. Or maybe the local elementary school..... Ya know so the walls can get some art work on them. Geeze louise, You build all these huge buildings with such massive expanses. Yea, Rent those walls to the local art musium. Or get a bunch of pastel paint, wavy lines. Green on the bottom and blue on the top, fading into the white. It's the end result there. Yea, Nice space and all but man. ~. Course you could go really retro and just paint everything black and then run a club there on weekends. Make mucho $$$. Oh yea. And now you are talking about black walls. I think a nightclub. Serve beer at night lights and dancing. Build it and people will come. Mucho $$$. You got it Kyle. All good.

You didn't insulate between the window and the framing?

You know it’s raining cats and dogs when you step on a poodle. Ha ha

with your serious ocd how do you keep Greg still working for you?

IN 2024 you do whatever you want to! LOL

Building science of window openings: Moisture Management Fundamentals with Joe Lstiburek kzfaq.info/get/bejne/qMudaLqZq8_Np4k.htmlsi=vqACc7u9Gq8uRHxu&t=1825 The full presentation is well worth watching.

So your 2' center is now 21.75".

I’m sure your local lumberyard appreciates you going through all the lumber and sending back all the sh**y boards… and I’m sure you have a relationship relationship with that one lumberyard that you use most of the time…I mean that’s part of the deal they have to sell what comes in there. You should have to buy what comes in unless you bought all number one material.

Good job, but it sure is putting a lot of faith in adhesive tapes that honestly are getting stuck to what is an unprepared surface in a lot of places, now if there was some sort of surface sealant/primer that promoted adhesion I might develop some faith, after all you're sticking it to timber which is just a shit load of little holes with some fibre between them and at the end of the day it will all be covered up and the client will never know when it has failed. Being that pressures could be higher and lower on either side of the membrane should it be pressure tested and vacuum tested post construction and again say 2 and 5 years down the track considering the investment in time and materials. I guess there should be some kind of standard to meet and maintain, is there one ? Too often in construction materials and methods are found to be failing once down the road, more often with the client left holding the bag and all of those materials were fit for purpose when initially installed, thinking about asbestos sheet, polybutylene fittings/tube/rings of all variations, galvanised nails in decking timber, galvanised bolts in decking timbers, multiple building and roofing papers, fibre glass and pic roofing sheets, monolithic exterior designs and material failures, compressed hardboard weather boards, sewer pipe sealing rings ... honestly the list just go's on and on. Don't get me wrong I see the effort you put in to do the best job you can and no one could ever accuse you of just thoughtlessly throwing a building up, and good on you but even from the other side of the fence you must also worry that some new product is going to bite you in the arse because they do and it's happening more and more with unproven processes and materials used to fill technical requirements.

Цена этого дома трилион сколько ленты потрачено

25:25 It's not a new invention, it's just redefining the wheel and the purpose of the wheel.

OOPS ~ I meant black windows and doors. ~. Put in a sound system. Dancing. I can see that. *The RR Club.* It's all there for you. ~ I know you can. 〰💥‼💥〰

Hospital grsde laboratory spec submarine duty Space ststion warehouse design... OH MY....,!

Хороший досок для муравьёв и мышей