Wait, WHAT. That table saw trick for angles! Simply Genius. Great ideas.

Brilliant idea on cutting the angles on your table saw!!!!!

EXCELLENT projects !!! I love your use of wooden dowels. You don't see much of that anymore 😀😀 Great video

Going to have to watch this five more times just to remember all of the cool techniques and ideas. 👍

Dowel joinery on shop projects.....now that is posh 😁. Took a lot of inspiration, thanks

A different French cleat latching method. Interesting. Lovely video. Thank you.

Awesome that you take the litte extra time to sand each of your modules... looking forward to what comes out of your channel next! Subscribed! Cheers!!

Dude, you are amazing! Thanks for sharing, I’m definitely using some of your ideas!

I like the use of the dowels. You make them look easy.

I think that wooden dowels would be much more convenient than threaded rods. Thank you very much for this awesome video!

Outstanding video! I was mesmerized!!

There is woodworking and than there is "the Art of woodworking" you bring more than just a good design well made, you show that there can be a Art to it as well.

Haha. Great job. I loved the TV and remote. I did the same thing for my video. I'm going to have to try a paper towel holder on a French cleat though. Good idea

Very impressed with your creations and use of dowels. Bet you use a LOT of dowels! Good Job!

There's a word for this.... it slips my mind at the moment😄😁

Very nice! Looks great!

Very nicely done!

My friend! This is one of the best videos I have watched in KZfaq about tool panel! I would like to get my own, and now it's easier! Thanks a lot!!!

Great job!

A couple of questions/thoughts. First, why did you go with the tongue and groove method rather than the complementing angles approach? I have considered going with a tongue and groove and would appreciate your thoughts on this. Second, a minor suggestion on the paper towel holder - make the front edge a little taller, or with a lip, and then cut a slot from you hole through to the top of the side piece. At the same time, you could either use a wooden towel with a glued on piece on each end or use your bold with the nuts locked on end such that instead of having to unscrew and rebolt the entire unit each time you change paper you can just lift it up off the holder, slide out the dowel/bolt, slide on a new roll and drop back into place. I really appreciated the way you took your time to think about how you wanted your tools laid out -- very nice. And I just subscribed.

Nice ideas, I will use parts of them.... 👍

Truly inspirational.

Super travail, c'est propre et ingénieux. Bravo

Thank you! I'm just in the process of reorganizing my shop and have been looking for ideas. This is going to be a great help. Fantastic system. :)

That was fun. I like the compact design cleat hanging design. The over engineering part, just entertaining. 🙂

I always struggled with matching the dowel jig to both side and I never thought about just marking the other piece. Genius move

Enjoyed your video. Please add links to your magnet source and your doweling tool in the description. Surely sales could benefit you and your channel. Thanks too for sharing Token and Fernweh as well.

super job. Merci aus Süddeutschland. Thom

Pekna praca. Prehladne a dobre zorganizovane. Super.😁😊☺👍👌👏

Bravo félicitation excellent travail soigné 👏👏👏👏

Bravissimo idee chiare e concrete .

Bellissimo e Molto interessante per un Principiante Come Me. Grazie Mille e Buon Lavoro.

Bravo! C’est du très beau travail 👏👏👏👏👍

Great song :)

Great thank you

Nice work sir!

AMAZING

Have fun with that paper towel holder lol.

Nice work man. I used to have your ambition, determination and patience in the shop but I lost it along with my mojo.

Bravo

hola Y acá estamos...

Bon travail

Hi.wow,really appreciate your attention to detail and helpful designs hope to emulate you,one...day. thank u.

muy bueno todo🙂

merci

Wonderful build, but I have to know, how quickly did you regret tightening the nuts on the paper towel holder?

What is the name of the small blue tool used for spacing holes for the dowels? And brand?

Great video loved your clear wrkeat care making also like the other chap before me commented on soundtrack can you tell us who the singer is and song please

Great video except for the paper towel - That will drive you nuts ;) I love the doweling on your projects BUT, what are you using at 5:51 to make the indents? I have been looking for something similar but no luck as I do not know what name/description to look for.

Merci !

It's good to see people build similar concepts with their own techniques.

"Don't use those paper towels... Please... It's a pain in the ass to change the roll."

i miei complimenti....

Interesting I think I like the regular, 45 deg french cleat better. Alot of nice ideas. I'd do the paper towel holder different. I wouldn't want to be taking that apart to change out a new roll. Maybe a spring loaded bar.

wow, fantastic! out of curiosity, why did you decide on wooden dowels instead of wood screws to hold the vertical pieces? I'm asking as a novice wanting to learn.

what's the model of your metabo saw? Are you happy with it?

For roll materials (adhesive tape, electrical tape, etc.), wouldn't it be better to just make pins? When the material is used up and the roll becomes thicker, it will fall between the consoles.

What is the blue jig you use to locate down holes?

nice Ideas, but soooo much Material for the tools ? Greetings from the wood... And merry christmas for you all.

Que belo trabalho meu amigo, vídeo muito agradável de assistir. Ganhou mais um inscrito... Parabéns pela habilidade e profissionalismo. Forte abraço.. 🛠️👍🏼

Love the content on the video. I did give you a 'thumbs up' on the video tab, but I do have one slight criticism: Being new to wood working, and trying to gain perspective on how to create something like a French Cleat system - I wanted to know the locking, or hanging mechanism you had for your wall and cleats. I could kinda see how you designed the cleat planks to hold your tool holders, but a quick visual on that set-up would have be nice. I watched the whole video and don't recall any visual of that aspect of your cleat system. But overall, good video and camera angles.

Is your wall actually considered french cleats? I've never seen tongue and groove used as cleats before. Still love the video, just curious if that's something I've not heard of.

👍👍👍

good job, one detail : for the paper it will not be very convénient to change

Like the music with the project what is the name of the song and the group

👍

Question : you don’t glue any dowels??

Several excellent ideas for holders - thank you. Bur the music was an unneccessary distraction.

6:30 is good if the towels are enough for a year: you have to turn 4 nuts each time to change the roll! it was necessary to make a quick-release axle. 😂😂😂

I wish I was gifted to do this... Let's see if 3d printing a wall isban option.

Братка! Держатель для пульта нужно делать из 30-й фанеры! А для калькулятора из металла!

how will you replace that roll of paper?

what is the name of the tool at 8mn17 please ? Ty

Я эти работы одним лобзиком и шуруповертом сделал

Получается у тебя шпунтованная доска,и не "французский" подвес на 45*? Ну это тоже неплохо!

👏👏👏👏👏👏🇧🇷

you missed the main part. where is the end product?

Qual o nome da música usada no início do vídeo ?

Sei Italiano? bellissimo sistema

Wonderful video. Please could you tell me what the background music is?

I would leave out the knock-off music. To loud and distracting. Is that a French cleat wall or just shiplap? I like how you did the drawer dividers, clever!

Get a vac on that saw

卷纸那个配座封起来好难受，做一个从上8点钟开口的座可以灵活换纸还不容易脱落出来。

Well now I get it. This guy is still using Calculator.

Do you sell anything you make? Can I buy some of these items from you?

Edmilson Ferreira de Paulo

Why don’t try to GLUE ?

Nice work, but goofy 21st-Century hippy music...

Video was good but need to explain what you are doing

Aber wenn die Papierrolle leer ist, musst Du den ganzen Gewindestab ausbauen.....

и берись за острые концы всего 😁

Il lavoro e bello ma per chi non ha tutti quei strumenti Potresti fare un lavoro più facile

👍👍👍🇧🇷🇧🇷🇧🇷🏅🏅🏅🏅

Great video. What is the sound track?

Papierrolle mit einer gewindestange Fixieren 🙈

Смотрел бы и смотрел, но громкая музыка отбивает всю охоту ,понятно от шума инструмента все мастера глуховаты, всё равно пожалейте нас подписчиков.

Nice video, lose the music

Great ideas! But this men is bored

Entirely too many Allen wrenches…….ha ha ha Looks like a lot of work is required to change the paper towel roll

ハンマーの形を取ってた道具何て名前？