From Grocery Getting to Corner Carving: The 328i gets an F80 M3 Suspension Makeover

Рет қаралды 15,010

Ай бұрын

► A BMW can be judged on many traits, but handling is likely to top all. The F30 328i isn't a poorly handling car out of the box, especially if fitted with the Track Handling Package, but there's plenty left to be desired. The F80 M3 is a shining example of what the F30 chassis can be, so we figured, why not rob some parts?
The shared F80 and F30 platforms allow for extensive parts interchangeability and support from all the usual aftermarket suspects. Bilstein DampTronic B16 coilovers provide the perfect dual-purpose damping we were looking for with this project, and they function as OE with BMW's EDC. Elsewhere, 034 Motorsports and RevShift ensured unwanted roll and bumps were handled firmly thanks to revised bushings and sway bars. Even Genuine M3 parts were grabbed to help improve the lack of front camber from the factory. Yet all of that pales compared to the most impactful change in the build.
What's that going to be? Stay tuned for episode 4 of the Rein 328si build, and find out!
SUBSCRIBE: kzfaq.info?sub_c...

Пікірлер: 41

@fcpeuro-media Ай бұрын

Link to Parts List from THIS Episode : shorturl.at/itGS2

@johnjoyner75 Ай бұрын

Any chance y'all are planning to start selling the F8x arms with the F3x Syncro monoballs pressed in, like used in this build? The F30TAKIT looks like it uses F3x arms and this link has the standard F8x arms.

@lamboferruccio Ай бұрын

4cyl cars may not be popular as a tuning platform in America but outside the US where governments tax cars based on engine size they are very popular, can’t tell you how many 320/328/520/528’s I’ve tuned all with similar suspension and brake upgrades you’re doing here, it’s nice to see it outlined here on KZfaq for a change

@lyte561 Ай бұрын

Since in my country you only got 4 cyclinder engines for the f30 I bought the 320i n20. Many people who have no proper knowledge were criticising that car only issue with it is the timing chain which you know will only break when it goes over 100k kms. But finally there’s someone upgrading and actually showing the potential of the 320 and 328i

@lamboferruccio Ай бұрын

Yes agreed as long as you catch it early and replace it it’s good for another 100K and the engine responds really well to tuning too, it’s no N55 but it’s still a fun platform to play with!

@Cybrons Ай бұрын

You guys are touching things that I thought you would never be touching, wonder how it'll drive like I'd love to drive it myself to get a understanding.

@fcpeuro-media Ай бұрын

The way this car feels honestly far exceeded our expectations.

@M3Eurotrash1 Күн бұрын

In the process of doing the same thing to my 2012 328 Manual. Ran into the same situation for the rear spring arm and currently in the process of developing a solution similar to SPL.

@malikharris8297 11 күн бұрын

I really love 328i videos thank you

@fcpeuro-media 11 күн бұрын

Glad you enjoyed these!

@MrGiomig Ай бұрын

This was my first BMW I have a 540 now which is great but this car is a great daily and very modifiable

@gregoryh4601 Ай бұрын

Very awesome Build sir

@fcpeuro-media Ай бұрын

Thanks Gregory , we are excited about it!

@timiafolabi4237 Ай бұрын

Will there be a build sheet with parts link? I will be very much interested in some of the parts you guys added that aren't normally done for the N20

@ReeshaRacing Ай бұрын

Yes I was waiting for this lol

@fcpeuro-media Ай бұрын

Happy to deliver!

@bryantharris5914 Ай бұрын

I watch a lot of your videos, congrats on the weight loss!

@1hughjanus80 Ай бұрын

THANK YOUUUU!!!! Thank YOU!!!

@lloidpadilla427 Ай бұрын

CANT WAIT FOR PERFORMANCE MODS

@petert7807 Ай бұрын

Wait, you can off set the holes on the swaybar? You show it as a 2-way on the screen?

@binmoy9803 Ай бұрын

Will this entire thing work on a regular 328xi?

@hahababyboy Ай бұрын

I have fitted an M Performance Brake Calipers, and have also programmed it onto my F32 428i. However I noticed it is pretty spongy on brake pedal feel (original floating calipers felt better), to the point that double pumping the brake pedal made it 150% more firm. Ive done multiple brake bleed-- its still the same unless i changed to New Brake Pads. Seek your advice on above.

@washableaxe Ай бұрын

If you are confident the DSC is programmed correctly, I’d suggest running the ISTA brake bleed procedure.

@prasanthselvadurai3450 Ай бұрын

Bigger master cylinder to push more fluid? Idk

@washableaxe Ай бұрын

When i visit the website I Can’t see any sort of cumulative parts list for this build. Is my browser messed up or is it not there yet?

@robertmack651 Ай бұрын

What downpipe did you guys go with here??

@wolvesbrigade1700 Ай бұрын

Hey guys a few questions. Firstly for the shocks did you consistent the Evolve Bilstein B16, they look a bit nicer and are supposedly better valves. Not sure if they make em for F30 though but would be worth looking into. Second, why did you choose 034 Motorsport for the Sway Bar/Bushings In comparison to RevShift/H&R or Dinan. Lastly for the inner rear LCA millway and suspension secrets make some really nice solid inserts to set the arms and dial in the setup even more. Also is the LCA upgrades needed cause I’ve been interested in looking into them. Lovely video, I have a 2015 328i Msport that’s I’ve upgraded brakes, tires, and a few smaller mods and this is really having me reconsider my original plans of selling the car. Amazing mods all around and I’m so excited to see what next!!

@carbonjesus5063 Ай бұрын

I just want to know how the heck to make it possible to fit in a 40i LSD for the 328i. I want this. I need this 😭

@gwapo3927 24 күн бұрын

Whats the hp on it now ?

@davidrubin2612 Ай бұрын

can I please buy your awe exhaust you took off and those calipers?

@paulmickle1135 Ай бұрын

You can buy mine lol midpipe

@fauzansheikh4382 Ай бұрын

Can I get a link to this cart? Thanks

@fcpeuro-media Ай бұрын

shorturl.at/itGS2 here ya go! Full cart coming for the entire build too.

@buildindian8169 Ай бұрын

I cannot see the logic of swapping to F80 arms if you need to upgrade the bushings…the whole point of using F80 arms on an F30 chassis is to get the steering feel from the mono balls so why not just up the f30 arms to mono balls.. Please clarify…

@maximusaxe 29 күн бұрын

Wheel & tire specs?!

@WhiteBeardDetail Ай бұрын

Can we get this video for xdrive please. It's like super rare to get a video like this for my vehicle. 440i gran coupe xdrive. I can't use those control arms because of drive. Or just a detailed video for what can be done with xdrive. Arms shocks and bearings and such. Also the rear suspension and arms too. PLEASE..... PRETTY PLEASE 🙏

@brianj6314 Ай бұрын

No stfu us n20's have been waiting for too long

@matthewschaefer2678 Ай бұрын

you could get mono all front control arms and will be better