FSX How to Taxi | B737 + B747 + A319

FSX How to Taxi | B737 + B747 + A319 | Tutorials

Рет қаралды 71,325

8 жыл бұрын

Fully learn how to taxi with a complete tutorial in the Boeing 737-800, plus tips for the Boeing 747-400 and Aerosoft's A319. Including the basics of speed rules, what lighting should be set up and what you should actually use for taxiing - rudder, ailerons or tiller? Learn how to taxi.
Visit - flyawaysimulation.com/
Aircraft:
Boeing 737-800 - Default
Boeing 747-400 - Default
Airbus A319-100 - Aerosoft - bit.ly/JFV-AeroA319
Scenery: Default
---------------------------------------------------------------------
- How to Take-Off - • FSX How to Take-Off | ...
- How to Land - • FSX How to Land | Boei...
- How to Use Autopilot - • FSX How to Use Autopil...
- How to Land with ILS - • FSX How to Land with I...
- How to Open Doors + Cargo Doors - • FSX How to Open Doors,...
- How to Taxi - • FSX How to Taxi | B737...
- How to Install Add-Aircraft - • How to Install Planes ...
===================================
► Gaming Channel: bit.ly/TectonicTCT
===================================
USEFUL INFO -
► Website: jfv.tv
► FAQ: jfv.tv/faq
► Specs: jfv.tv/tech
CONTACT/UPDATES -
► Facebook: / jacksfsvideos
► Twitter: / jacksfsvideos
► Instagram: / jacksfsvids
===================================
VIDEO CODE: JFV-TNJ-000-004

Пікірлер: 217

@aerofiles5044 4 жыл бұрын

I already know all these taxi rules and things but I still watched this anyway because it was soothing lol good work m8

@MarEpor 7 жыл бұрын

it’s impossible to properly taxi with the rudders on keyboard

@JacksFSVideos 7 жыл бұрын

Yes it is much harder to use the rudder when using keyboard and mouse. I would strongly recommend purchasing a joystick.

@Adrixnz 6 жыл бұрын

very fukin true

@paulbaltazarrr 6 жыл бұрын

MarEpor Ikr. But I got the hang of it

@JacksFSVideos 6 жыл бұрын

Nice!

@zarakdurrani7584 5 жыл бұрын

Jack's FS Videos would a ps4 controller be helpful in this?

@EuroAviation 7 жыл бұрын

You actually can see your speed while taxiing on the a318/19/20/21, if you look on the ND on the top left you see "GS" which stands for groundspeed, with your speed right beside it

@ringnyu6476 4 жыл бұрын

Nice video! I usually don't control my taxi speed manually. I just set 15 knots and hold the speed on auto throttle.

@JacksFSVideos 4 жыл бұрын

Really shouldn't be doing that on the ground!

@kgacademy1373 4 жыл бұрын

For the tiller you don't need a addon you just need to press CTRL+SHIFT+U and you just need to move the rudder.

@kaykay6047 4 жыл бұрын

You are so strong when you receive hate comments or whatever you ignore it and shoot it back with kindness your the best you earned a sub

@JacksFSVideos 4 жыл бұрын

Haha thanks so much! And thanks for subscribing :)

@pixafreno4412 4 жыл бұрын

ahahahahah now I understand, I was turning using the engines, full power Engine 2 to turn left, Full power Engine 1 to turn Right... xD

@JacksFSVideos 4 жыл бұрын

Oh wow, not sure how you managed that 😂😂

@pixafreno4412 4 жыл бұрын

@@JacksFSVideos Practicing the worst way of doing something is the best teacher to actually don't complain about the correct way.😂

@pixafreno4412 4 жыл бұрын

Btw on the B-737 now I use the pedals, I saw ppl actually turning with the yoke at the ground... Do you know what I'm doing wrong? If I use the Yoke the plane dosn't turn..

@JacksFSVideos 4 жыл бұрын

The yoke controls the ailerons, the pedals control the rudder, the tiller controls the centre gear. You should use them in this reverse order where possible

@adityaarora9479 7 жыл бұрын

your videos are really helpful :)

@JacksFSVideos 7 жыл бұрын

Really glad to hear you find the videos helpful! Thanks for watching and don't forget to subscribe!

@AusFlightSimmer 8 жыл бұрын

Thanks for the video, Liked!

@JacksFSVideos 8 жыл бұрын

Thank you!

@timotejkrajcovic 7 жыл бұрын

What scenery add-ons using?

@JacksFSVideos 7 жыл бұрын

In the episode, I don't use any scenery add-ons.

@nejcribic 3 жыл бұрын

Really useful! Thanks

@JacksFSVideos 3 жыл бұрын

No problem!

@AirplaneFan-ps3fx 6 жыл бұрын

Thanks Jack did not know that I Exceed 40kts wile Taxiing on Streight Paths In Curves about 15kts Nice video

@JacksFSVideos 6 жыл бұрын

Glad it helped you out!!

@washx2k755 6 жыл бұрын

I thought max was 30knot for taxi as captain joe said in his video

@JacksFSVideos 6 жыл бұрын

That's right, 30 is the limit

@jefferybensonakathetutoria5593 5 жыл бұрын

it is 30 knts...... and another mistake, its 200knts below 10,000 FEET

@z3ny156 5 жыл бұрын

@@jefferybensonakathetutoria5593 no, it's 250

@eamesaerospace2805 5 жыл бұрын

FAA says its 15

@smsotheraccount1040 4 жыл бұрын

Wait... I taxi at 40

@aaronholloway1991 7 жыл бұрын

thanks for the help

@JacksFSVideos 7 жыл бұрын

I'm glad it helped! Thanks for watching.

@aryanrishi 7 жыл бұрын

You have really great videos!

@JacksFSVideos 7 жыл бұрын

I'm really glad you like my videos! Thanks for watching and don't forget to subscribe!

@daraious-simulations1007 5 жыл бұрын

But the main thing I wanted to learn was how do you keep the nose wheel perfectly on the taxi line? What do you line it up with?

@JacksFSVideos 4 жыл бұрын

From inside the cockpit? Each aircraft is different, you just have to find a reference point :)

@Niek__o 7 жыл бұрын

Thank you! This was really useful!

@JacksFSVideos 7 жыл бұрын

Glad it was so helpful! Thanks for watching and don't forget to subscribe!

@Niek__o 7 жыл бұрын

Jack's FSX Videos ah in the time between the comment i made i got addicted to your channel 😂

@JacksFSVideos 7 жыл бұрын

Haah well that's good to hear! Hope you're enjoying the videos!

@alexmc3885 6 жыл бұрын

You’ve just gained a new bus jake!

@JacksFSVideos 6 жыл бұрын

Nice! I do like a bus

@poppestalis4987 3 жыл бұрын

i still dont know how to find the right runway

@matiasjacobsen2647 4 жыл бұрын

Hi.I'd like to know what airport you were at when you recorded this in fsx.

@JacksFSVideos 4 жыл бұрын

I think it was Stansted, London

@tyleranimated2334 7 жыл бұрын

I use flyawaysimulation i recently got a Lockheed constellation

@mmystkowski 7 жыл бұрын

I use simviation for models and fly away simulation for textures

@austben 7 жыл бұрын

Dominik Mystkowski I also use simviation for models! I haven't figured out how to install textures though

@Flightsimmovies 7 жыл бұрын

Runway tunoff should be on when taxi too Anti collosion must turn on when aircraft move or engine start.

@JacksFSVideos 7 жыл бұрын

Runway Turnoff lights should not be used while taxiing as they have the power of landing lights which are very bright. This is why they are called 'Runway Turnoff' lights, as they are only to be used when turning off the runway - not taxiway. The anti-collision light must be turned on before the aircraft moves, however for this tutorial, I just did all of the lighting at once.

@Flightsimmovies 7 жыл бұрын

+Jack's FSX Videos but why nokair use runway turnoff for taxi maybe it depent on airway than you

@JacksFSVideos 7 жыл бұрын

I don't think it is to do with the airline as it's a universal rule.

@mimonls1542 7 жыл бұрын

Jack's FSX Videos what dlc rex4 texture?

@JacksFSVideos 7 жыл бұрын

I'm not sure what you mean. Could you explain?

@Mohamedkhaled-ln6rk 4 жыл бұрын

How can I use the front gear to control the aircraft on the ground in fsx (what is the Shortcuts )

@JacksFSVideos 4 жыл бұрын

As the video explains, default aircraft don't let you use the tiller

@tupolevi 6 жыл бұрын

Can we reverse the whole plane while taxing e.g. over the waiting line? And what command is used here? Thanks.

@JacksFSVideos 6 жыл бұрын

You can push back technically anywhere in FSX, by pressing Shift+P

@itsdaniel2277 4 жыл бұрын

i love flightradar24

@mdpowergood 7 жыл бұрын

How to VC Screen fixation? Just like your vc view..

@JacksFSVideos 7 жыл бұрын

You can get into the 3D cockpit by pressing F9.

@yugoslavmapping4004 7 жыл бұрын

Great video ! But when i want to use rudder i can turn left but when i want to turn right it opens my cockpit (2D). When i changed settings it still didn't turn right. Anybody know how to fix it?

@JacksFSVideos 7 жыл бұрын

I'm glad you like the video! I'd like to try and help you solve this, could you contact one of my volunteers on Facebook, Twitter or Instagram or via email? All details are in the description.

@yugoslavmapping4004 7 жыл бұрын

Ok :D

@Flightsimmovies 7 жыл бұрын

Great work jack Keep doing it :)

@JacksFSVideos 7 жыл бұрын

Thank you! I'm glad you like it!

@markus9561 8 жыл бұрын

Do a flight in the Aerosoft Airbus. If you know how to use FMC :P

@JacksFSVideos 8 жыл бұрын

Thanks for the suggestion! Unfortunately, I don't yet fully know how to use the FMC, only the very basics. Therefore, I can only do this for members. Thanks!

@markus9561 8 жыл бұрын

***** Yeah no problem buddy :D

@BaidikGhosh8f 6 жыл бұрын

Hey my rudder is really fucked up....i use the ledt rudder to turn left in the grnd...the flight then Just keeps turning left and doesnt stop....plzzz i really need help in this

@JacksFSVideos 4 жыл бұрын

Try Ctrl+Shift+U to unlock your rudder

@Userznxbdjr 6 жыл бұрын

Can you say me which rudder addon do you used to taxi?

@JacksFSVideos 6 жыл бұрын

I don't use any add-ons, I just use my joystick, but you can use key commands too

@AnglerDanNE 5 жыл бұрын

How do you get these views of the wings and the pedals and stuff?

@JacksFSVideos 4 жыл бұрын

Ezdok

@jjuaton2994 7 жыл бұрын

what addon should you be able to use the tiller?

@JacksFSVideos 7 жыл бұрын

As far as I know, there are currently no add-ons that allow you to use the tiller in FSX.

@fancandyman 7 жыл бұрын

How do you get such realism can u list what did you use for this video also tell me what fax or prepar3d u have thxx

@JacksFSVideos 7 жыл бұрын

The version of flight simulator always used on this channel is FSX (Flight Simulator X). Other than the aircraft, I've used two add-ons in this video, which are REX 4 and a DLC that improves the graphics quality on buildings etc. (I don't have the name with me right now - you can message me if you want to know).

@fancandyman 7 жыл бұрын

Yeah u can sure tell me the name

@JacksFSVideos 7 жыл бұрын

I'm afraid I still away so don't have the name with me right now. You can message me if you want to know (one of my volunteers will respond).

@marcelodb5429 7 жыл бұрын

How do you use the tiller in FXK?

@JacksFSVideos 7 жыл бұрын

As mentioned in the video, you cannot use the tiller in FSX - it's not a feature included. Instead you can use the rudder.

@TheRacerX 4 жыл бұрын

Do you use num keys for taxiing?

@JacksFSVideos 4 жыл бұрын

No I use a joystick

@tf51d 8 жыл бұрын

Actually your premise is wrong, at least here in the US. there actually is no set rule by the FAA. Just a guideline to use "appropriate taxi speed". Most restrictions are more from airline SOPs and possibly specific airport restrictions. Boeings own FCOM for the 737NG states taxi speeds of upto 30kts is acceptable on long straightaways, and no more then 10 kts on a turn. Many airlines use the rule 10kts on the apron, or turns, 20kts on straightaways with possible obstructions, and up to 30kts on straightaways without obstructions.

@JacksFSVideos 8 жыл бұрын

Yes, the speeds you've mentioned in your comment are exactly what I've suggested to do in this video.

@clebyweby 7 жыл бұрын

I thought max was around 30-35kts.

@JacksFSVideos 7 жыл бұрын

The maximum is 30 knots, however I recommend on a normal straight taxiway, to go 20-25 knots and slow down to 10-15 knots for turns.

@tf51d 7 жыл бұрын

10kts for turns yes to15kts no.

@JacksFSVideos 7 жыл бұрын

This is why I said 10-15 knots. Every aircraft will handle turns very differently, so up to 15 knots (as a maximum - no more than this), is acceptable for certain aircraft. But yes, 10 knots would be better, but 15 knots would not cause any harm to some aircraft. Overall, the majority of aircraft will be fine 10-13 knots and some will also be fine 10-15 knots.

@lastsamurai2000 7 жыл бұрын

How do I use the tiller? As in, which key do I use to turn it left and right?

@JacksFSVideos 7 жыл бұрын

As mentioned in the video, you can't use the tiller in FSX. Instead, it's recommended that you just use the rudder.

@lastsamurai2000 7 жыл бұрын

That's unfortunate because the rudder provides a very limited amount of turn. Making a U-turn on runways is impossible without straying off the runway. Hope the next version of Flight Simulator takes care of tiller control.

@JacksFSVideos 7 жыл бұрын

I've found that more almost all aircraft, the rudder is fine to use. Commercial aircraft would very rarely have to do a u-turn on a runway and when they do, there is always a turning point (e.g. London City Airport).

@johnatanomg604 6 жыл бұрын

What i can do my rudder is not working on a320

@JacksFSVideos 6 жыл бұрын

What are you using to turn your rudder? Have you tried Crtl+Shift+U

@Chakshuvlogs 5 жыл бұрын

Bro in my fsx my a321's rudder is always go to right it's too much hard to taxi how to straighten rudder?

@stoplookingatmynamelol595 5 жыл бұрын

Chakshu vlogs adjust your rudder trim

@JacksFSVideos 4 жыл бұрын

Try Ctrl+Shift+U to unlock your rudder

@mahadahmad4119 4 жыл бұрын

Which key do you use to break

@JacksFSVideos 4 жыл бұрын

The full stop (.)

@nithishpraveen1861 7 жыл бұрын

Do tillers work on FS2004

@JacksFSVideos 7 жыл бұрын

Sorry, I'm not sure as I've never owned that version!

@NMartin3 7 жыл бұрын

Can i have the link for your sky addon?

@JacksFSVideos 7 жыл бұрын

I use REX 4 with Softclouds and Overdrive for the weather and sky textures seen in my more recent videos.

@dayinanlifeofassassinscreed 3 жыл бұрын

How do you use the Rudder?

@JacksFSVideos 3 жыл бұрын

Key commands are on my website or you can use a joystick :)

@aljaztravnik 6 жыл бұрын

What if i use the autopilot speed regulator?

@JacksFSVideos 6 жыл бұрын

What do you mean? The speed hold selector?

@zealsaballa1049 7 жыл бұрын

are you using a joystick. if not can you PLz tell me what you are using.

@JacksFSVideos 7 жыл бұрын

I sometimes use the Saitek Yoke, however I more recently use a joystick as I find it easier.

@OvercookedSteak 5 жыл бұрын

How about without a joystick or speed? I don't have these, I only have a mouse and keyboard...Er, the tutorials don't say.

@JacksFSVideos 4 жыл бұрын

Check out the key commands at jfv.tv/flightpath

@anyagupta8461 6 жыл бұрын

What is the default KEY for climbing?

@JacksFSVideos 6 жыл бұрын

There is no default key for climbing, you just have to pull back on your joystick or set the autopilot to climb

@ahmedjumaa7126 4 жыл бұрын

Jack's FS Videos please help me

@dionysisarvanitis8246 6 жыл бұрын

Wherever i am, my rudder is automatically making my plane turning right. Btw i use joystick

@JacksFSVideos 6 жыл бұрын

Maybe reset your rudder, Ctrl+Shift+U

@dionysisarvanitis8246 6 жыл бұрын

Jack's FS Videos thanks for the help mate, ill try it

@shehabeldinmahmoud3736 5 жыл бұрын

How to taxi and turn left and right without moving the stick on my keyboard please? If anyone can help

@ahmedjumaa7126 4 жыл бұрын

Shehab Eldin Mahmoud شلونك حبيبي

@JacksFSVideos 4 жыл бұрын

Left and right arrow keys

@Lovetutorialeveryday 7 жыл бұрын

How to make the rudder to center after turning the rudder to the left and right?My rudder will still keep left or right when I use my rudder.Anyone can help me?

@JacksFSVideos 7 жыл бұрын

Are you using hardware or the keyboard keys? If you're using the keys, which ones?

@Lovetutorialeveryday 7 жыл бұрын

I have set my rudder as A and D key so i can control easily.But the rudders cannot turn back to center automatically

@JacksFSVideos 7 жыл бұрын

What have you set the A and D keys to? What is the exact name of the command?

@Danish-wk2uq 3 жыл бұрын

spec pls

@harryroberts388 4 жыл бұрын

For some reason my A/T is on as soon as I start the flight. So I accelerate right into the terminal :( Any fixes lol

@JacksFSVideos 4 жыл бұрын

On a default aircraft?

@harryroberts388 4 жыл бұрын

@@JacksFSVideos yes

@JacksFSVideos 4 жыл бұрын

Not sure tbh, just have to hit F1 as soon as you get in the game

@1NightInParisOfficial 7 жыл бұрын

Why does the LED which shows my speed always show 45 knots instead of 0? Im flying a 737-800

@JacksFSVideos 7 жыл бұрын

Are you referring to the Primary Flight Display? And is the aircraft a default aircraft?

@1NightInParisOfficial 7 жыл бұрын

Yes I am. And sorry, I'm fairly new to X-Plane. Also, yes, the plane is a default aircraft that came with X-Plane

@JacksFSVideos 7 жыл бұрын

I'm afraid I can't help you with X-Plane as I've never used it before. I would only be able to help you with FSX. Sorry!

@LennyColton 7 жыл бұрын

Dany King The pitot tubes measure interpreted air speed "ias" for the PFD and Autopilot/Autothrottle and are only reliable at or above 45 knots. The navigation display displays ground speed "gs" and true air speed "tas" in the top left, and reduces all the way to zero.

@kylehussey9413 6 жыл бұрын

How are you moving your view like

@JacksFSVideos 6 жыл бұрын

Using ezdok

@fancandyman 7 жыл бұрын

What software do you use for scenery

@JacksFSVideos 7 жыл бұрын

There is no add-on scenery featured in this video - it's all default.

@mahmoudbassam4144 7 жыл бұрын

My recommended maximum taxi speed is 30 knots

@JacksFSVideos 7 жыл бұрын

That would be too fast in most cases. Usually 20-25 knots is acceptable and slowing down further for corners or bends.

@JacksFSVideos 6 жыл бұрын

Yeah it definitely can vary by aircraft, but on the whole, it's 20-25 knots

@theflyingtuba 8 жыл бұрын

When are you going to make the settings configuration of how to fix the lagging in fsx cause my fsx lags so much cause my laptop is not excellent nor isn't perfect and what causes fsx to lag it's annoying and also I get the fatal error so... what is causing the fatal error?

@JacksFSVideos 8 жыл бұрын

Unfortunately, I won't be making a video on what settings to choose to fix the lag in FSX. This is because everyone's computers will be different, therefore everyone's settings will need to be different. I suggest you simply try changing around the settings a bit and see what works. However, if you'd like more help on this, I can give you direct support via Facebook messages, Twitter messages or email. As for the fatal error, this can be caused by many reasons. The most likely will be that your PC has run out of RAM while running the game, in which case reduce your settings or upgrade the RAM. Or it can be caused by simply playing the game too long, which similarly causes the RAM to run out. Or, it could be down to a faulty add-on.

@piyushsharma7795 7 жыл бұрын

I can't control the speed how can I control it?

@JacksFSVideos 7 жыл бұрын

You can use the F1-F4 keys to control the throttle. Find all key commands here - www.jacksfsxvideos.com/fp-key-commands.

@EWormMusic 4 жыл бұрын

What airport are you at?

@JacksFSVideos 4 жыл бұрын

Can't remember for sure, but think it's Stansted, London

@johnnorza7062 7 жыл бұрын

are you using keyboard or pedal?

@JacksFSVideos 7 жыл бұрын

To turn the rudder, I use my joystick - it has an attachment behind the thruster control.

@brandnazvi9354 8 жыл бұрын

what throttle percent is to make a good taxi and what speed?????

@JacksFSVideos 8 жыл бұрын

The main part of the video talking about the speed is directly after the introduction. More is mentioned later on (particularly with bends) during the Boeing 737-800 taxiing. There is no set throttle you should be at, as this varies a lot by aircraft. For most commercial aircraft, it'll be anywhere from 10% to 25% - you can adjust the throttle yourself and see what percentage is best for each aircraft while keeping with the speed limit.

@brandnazvi9354 8 жыл бұрын

@paulbaltazarrr 6 жыл бұрын

Jack's FSX Videos its hard to adjust the throttle when using keyboard. I cant afford a joystick

@JacksFSVideos 6 жыл бұрын

You can pick up pretty cheap joysticks these days at around £25-£30. But otherwise, you will just have to get used to the keyboard

@paulbaltazarrr 6 жыл бұрын

Jack's FSX Videos yeah, i guess. Im trying to save up so i can get myself a joystick

@AirplaneFan-ps3fx 6 жыл бұрын

It takes Practice

@JacksFSVideos 6 жыл бұрын

Yep :)

@rahulk5039 7 жыл бұрын

TrackIR?

@JacksFSVideos 7 жыл бұрын

I don't use TrackIR in any of my videos. Thanks for watching!

@josephblessingh2384 4 жыл бұрын

What's the key for brakes for keyboard

@JacksFSVideos 4 жыл бұрын

Full stop (.)

@josephblessingh2384 4 жыл бұрын

@@JacksFSVideos oh the parking brakes!! I thought you wer talking about som other brakes

@JacksFSVideos 4 жыл бұрын

A full stop (.) are the brakes and Ctrl+. is the parking brakes :)

@glennroels6127 7 жыл бұрын

Hoe moet je een gate installeren in de demo

@JacksFSVideos 7 жыл бұрын

Sorry, ik spreek geen nederlands

@Niek__o 7 жыл бұрын

lol, not sure if translated or real.

@JacksFSVideos 7 жыл бұрын

Haha, no that was just Google Translate saying "Sorry, I don't speak Dutch" haha :)

@thebigr5356 8 жыл бұрын

First view

@JacksFSVideos 6 жыл бұрын

Woooooooooooooooooooooooooooooooooooooooooooooooooooooooooo

@sarmilaghosh832 7 жыл бұрын

Which airport and gate is that

@JacksFSVideos 7 жыл бұрын

I filmed it quite a while ago so I couldn't be sure, but I think it's Stansted Airport, London (EGSS). As for the gate, I'm afraid you'll just have to try out a few or have a look at some charts.

@sarmilaghosh832 7 жыл бұрын

Jack's FSX Videos Thanks for such a fast reply

@sarmilaghosh832 7 жыл бұрын

also i had a cracked version of fsx so will the addons work them also

@sarmilaghosh832 7 жыл бұрын

While taxing while using the rudder once turned left,doesnt turn rigt.What i mean is it doesnt stay straight

@sarmilaghosh832 7 жыл бұрын

Can u please give a fix

@Vivaxsolutions 6 жыл бұрын

Easy! Just... down crash!🛩

@JacksFSVideos 6 жыл бұрын

What do you mean?

@Vivaxsolutions 6 жыл бұрын

I mean don't not down

@JacksFSVideos 6 жыл бұрын

What do you mean?

@Koploper77 7 жыл бұрын

15:13 This is absolutely false, you were going 18 knots as indicated on the display. Do you really think that Airbus pilots in real life need to ''guess'' how fast they are going on the ground?

@JacksFSVideos 6 жыл бұрын

Yeah I know where it is now, but when I made the tutorial I didn't - thanks anyway!

@avator50 8 жыл бұрын

lot of incorrect things there mate.

@JacksFSVideos 8 жыл бұрын

Could you please tell me what you think is incorrect?

@avator50 8 жыл бұрын

Fist with the turning late it is the same thing in the real world because the nose wheel is behind the pilots it is not something wrong with FSX, most aircraft in FSX do not use the tiller they use the rudder instead because most people will not have something to use as a tiller so they just use the rudder to turn the aircraft I don't use the default aircraft that much but I do know they are no where realistic but you are pretty good with most things

@avator50 8 жыл бұрын

and with the speed you are correct with on straights staying under 20 but when doing turns you should be going 10 or less and as for reading the speed yes it is in knots you do not look at the speed tape on the PFD here is a ground speed on the PFD and the ND some aircraft have one some have both but they look something like 15gs.apart from all that good video mate keep up the good work.

@JacksFSVideos 8 жыл бұрын

Thanks for letting me know. But I don't think you quite understood what I said in the video. Perhaps if you re-watch and read below you might understand what I'm saying. With your first point of the aircraft turning late, I completely agree with you that it does happen in real life - this is why I mentioned it. I was not implying that it was a problem with FSX at all, I was simply saying that because aircraft can turn sharply, make sure you turn late. I was not restricting this to FSX, as I know this is what happens in real life. Similar with your second point of most aircraft in FSX not using the tiller, you are also completely correct. However, as with the last point, I mentioned this in the video as well. In the video, I said that in real life, almost all commercial aircraft will use the tiller, but as they don't work in FSX, you'll need to use the rudder. So basically, in the video I have said exactly what you've said in that aircraft can turn late and that you will most likely be unable to use the tiller. I think you've just misunderstood what I was saying in the video. Hope this helps!

@JacksFSVideos 8 жыл бұрын

Yes, staying under 20 knots is correct. I did say in the video to go between 5-15 knots (15 as a maximum) when going around bends, and that 10 knots is the ideal speed. However as I also mentioned, staying below 20 knots is very unrealistic and for added realism, you should exceed 20 knots and taxi between 25-30. Thanks for letting me know about the speed indicator for the A319! I'll remember that for next time for when on the ground. And thanks for your support!