HF FULL BAND Mod. v1 - Quansheng UV-K5 (Skyworks Si4732 chip, LYSIA)

Рет қаралды 7,343

Күн бұрын

LUSYA Si4732 HF FULL BAND modification of Quansheng UV-K5 and UV-K6 portable radio. We remove old Beken BK1080 FM chip, and replace it with a new Skyworks Si4732-A10 SDR chip, which is the essense of the LYSIA HF FULL BAND mod. After this mod your radio will have new SDR receiver when entering FM mode on your quansheng UV-k5 or UV-k6, new tuner has the following capabilities:
- Worldwide FM band support (64-108 MHz)
- Worldwide AM band support (520-1710 kHz)
- SW band support (2.3-26.1 MHz)
- LW band support (153-279 kHz)
- Excellent real-world performance with integrated AM/FM/SW/LW/RDS
- Integrated VCO
- Advanced AM/FM seek tuning
- Automatic frequency control (AFC)
- Automatic gain control (AGC)
- Digital FM stereo decoder
- Programmable de-emphasis
- Advanced Audio Processing
- Seven selectable AM channel filters
- AM/FM/SW/LW digital tuning
Now, you have to understand, even though you are modifying your quansheng, you are not modifying your quansheng -- because the radio part of it will remain the same, you are merely replacing a chip, which in your stock radio is responsible for FM broadcast radio reception. With this new mod, you are replacing that FM chip with an SDR chip which provides you with all the above mentioned functionality. However, it's only as good as the software... So hold your horses and be sure to watch part 3 of this video mini series, in part 3 we are going to be taking a look at the software. Part 2 is about changing your display and keyboard colors.
Part 2 - • Change LCD Display & K...
Part 3 - • Do you need FULL BAND ...
Table of Contents
----------------------------
0:00 - INTRO
2:10 - Radio Disassembly
9:26 - BK1080 old FM chip
10:16 - Removing old FM chip, cap and inductor
15:58 - Replacing the 100 nf cap
25:12 - Installing new Si4732-A10 LUSYA dauterboard
35:21 - Making 2 jumpers
43:23 - Replacing the choke
48:29 - Recap of work done
50:31 - OUTTRO
Useful Links
-------------------
BK1080 Datasheet -- file2.dzsc.com/icpdf/17/12/18/1125865_165859249.pdf
Si4732-A10 Datasheet -- www.skyworksinc.com/-/media/Skyworks/SL/documents/public/data-shorts/Si4732-A10-short.pdf
CEC Firmware for the new FM chip -- github.com/phdlee/uvk5cec/releases/tag/v_01HF
LUSYA Modification Module Si4732 -- aliexpress.com/item/1005006706890871.html
#uvk5 #uvk6 #quansheng #hamradio #lusyamod #si4732 #codernov

Пікірлер: 19

@VassVince Күн бұрын

This is the most proffesional approach so far to this modification. Respect and good luck. 73

@andrewmarshall8086 8 күн бұрын

All the gear to do the job and you still you make it look hard joe LOL

@codernov 8 күн бұрын

There is a way to make youtube content that is watched and loved by most, I'm still learning, you're looking at my first video. Give me a chance. In this first version we didn't do something, we couldn't, because it wasn't in instructions. There is one more jumper has to be installed to increase sound. Stay tuned, I'm show where to install it.

@andrewmarshall8086 8 күн бұрын

Your ment to break of 2 tabs first and what happened to not loosing any parts LOL

@bsuyono 21 күн бұрын

I have checked on aliexpress there are different type of SI4732..which one better?

@codernov 21 күн бұрын

Browse my channel, there is video titled Do you need FULL BAND HF LUSYA Si4732 Mod. .. In that video's description there is link to the new brown board. Get that one. I got that one. Should arrive May 1st or earlier and then we'll do a video about installing that thing into my personal radio.

@bsuyono 21 күн бұрын

@@codernov thank you for your infornation...I would try to purchased the brown ones...

@ronlammers8972 16 күн бұрын

How hot is your hot-air blower ?

@codernov 16 күн бұрын

390 C

@Ham549 Ай бұрын

But can it do ISM band?

@codernov 27 күн бұрын

Dudes suggested Openwebrx. That means no.

@dj80d6 19 күн бұрын

yo can i just send you mine and pay you for this mod?

@codernov 19 күн бұрын

That's what I'm doing here, but outside country, there is no way you'd be able to pay me. We don't have SWIFT, there is no way you will be able to pay -- unless you're in few select countries like China, Cuba, Venesuela, Turkey, Iran, Belarus, etc.. But that's not a problem, you should be able to find a repair shop inside your country to get this mod done!! It's not something you have to send across the world to get done. Stay tuned, I have two new versions of this board coming up, both are brown in color. I'll be doing a quick guide, without hot air, just soldering iron , anyone can follow and DIY type of thing.

@Shadowcruise99 20 күн бұрын

I watched a couple of videos on that modification. With all the jumper wires required to get the breakout board and chip installed, the end result looks like a rats nest.

@codernov 19 күн бұрын

I ordered two brown board, those are the new board versions. The new one, and then couple of days later came out even the newer one. So soon I'll do a video on installing those. But this time around something quick, and something DIY, using soldering iron, so that anyone can do it themselves. Stay tuned.

@luigibellissimo 21 күн бұрын

e' una modifica da 5 minuti .

@codernov 21 күн бұрын

Ancora più veloce, 2 minuti.. Ma la qualità ne risentirà. Faccio le cose lentamente e prendo buoni soldi per il mio lavoro, in modo che le cose non mi ritornino indietro: in questo modo non faccio sprecare il tempo mio e del mio cliente.))