FULLY BUILT 300ZX Build Breakdown.

Рет қаралды 3,909

Күн бұрын

I've heard all of your inquiries, and rather that making you sift through every single one of my videos, I thought it would be best to put everything into one, single, video. So, here it is! Every single modification and the complete build breakdown of my 300ZX!
No, It's not at 1,000hp currently, HOWEVER, this entire setup from the fuel system, turbos, ECU, and engine components are all theoretically capable of getting there(only potential problem I foresee would be the fuel pumps are not capable of it. It's just a matter of me and my own competency of tuning and engine building and putting my skills to the test from here on out!
Support the channel and get some sick Merchandise!
billybuilds.com/
Use Code "BillyBuilt20" at checkout! until May 15th!
Wanna support the channel and get some stuff for your own build that i enjoy using? Below are some affiliate links to check out!
amzn.to/3XfvOTI Boost control solenoids:
Efan setup: amzn.to/3pfewtt -Spal 30102049 16" Curved Blade Performance Fan , Black
fan relay harness: amzn.to/3p4rytT
amzn.to/3tCRHCf -1/4 Inch od Push to Connect Fittings Pneumatic Fittings Kit
amzn.to/3H4HiCi - Elbow and Straight Combination 1/4 Inch Tube OD x 1/4 Inch NPT Thread
amzn.to/3S7DTsW - Nylon push-connect hose
amzn.to/3H4HzVQ - use these to adapt to a barb fitting for regular silicone hose
amzn.to/3SlbIHa -Tilton Hydraulic release bearing
amzn.to/48mBfFl - needed to go from the - 4an Tilton fitting to -3 on the chasebays hose.
amzn.to/3RKFxPM - deutsch connectors for the wiring!
amzn.to/3H7eetX - deutsch crimper!
amzn.to/3OQmnrT - Lisle 81780 Carbide Scraper Set -
amzn.to/3OQmnrT -Permatex copper spray
Quinn 1/2" digital torque wrench -amzn.to/3NdbKOG - Mine is snapon, but if i had to get another this would be it.
Music:
NEFFEX - Grateful

Пікірлер: 54

@rudimerm7686 2 ай бұрын

The Nissan designers not only nailed the exterior of the 2+0 Z32, but the Z32's interior is one of my favorite interiors of all time.

@yosvanirodriguez7499 2 ай бұрын

no fr tho, even the stock steering wheel is so nice, simple yet elegant, a little leather or alcantara and some stitching is all it needs

@beaches2mountains230 2 ай бұрын

I didn't know that color was a special option. When I was 15 years old, I worked at a body shop during the summers, and one of the guys was fixing up 1 that had been wrecked for himself and it was that color and he took me for a ride and I was hooked. I remember hearing the Turbo's whistle. And being impressed with the engineering of that car back then that was early 2000. Because of that car, I ended up getting a 300 ZXNA as.My first car from some japanese guy and it came with those same wheels that you have on your car crazy small world

@ChaseBaysTV 2 ай бұрын

Sick build dude! Thanks for the support!

@Billy_Built 2 ай бұрын

Thank you for your great products🙏

@kfneely1 2 ай бұрын

BDE still sells the goose honk killer kit.

@Billy_Built 2 ай бұрын

Been a long time since I've looked.. Good to know!

@brianheiden6623 Ай бұрын

What a great build you used a lot of parts I've had my eye on for a few years. Lot of new stuff since I built mine. Dam it your giving me the itchvto start dumping money into the z again lol. Right on dude keep making vids and tuning the beast!

@perfectdiversion 2 ай бұрын

Phenomenal video and thoroughness. This gives me inspiration to do this to my Z that i have owned since 2006! Spent a bit of money on mine and spent a bit of money on idiots to fuck mine up too!

@Billy_Built 2 ай бұрын

Appreciate that! I thought I've had mine for a while.. You got me beat!

@turbofridge1 2 ай бұрын

Love this car so much, inspired me to finally get mine sorted 😊

@Billy_Built 2 ай бұрын

Appreciate that!

@atarparker 2 ай бұрын

I have some very expensive 3pc fully forged wheels, so I feel like I'm in a good position to say this: there's nothing wrong with most reps

@izaahrusche 2 ай бұрын

What brand

@atarparker 2 ай бұрын

@@izaahrusche forgeline sp3p wheels

@ErAcEr100 2 ай бұрын

Fantastic rebuild of the Zed 32, another great iconic vehicle to rival all the sports cars from the 90's still on the roads today.

@Billy_Built 2 ай бұрын

For sure!

@dannoyes4493 2 ай бұрын

Well Done.

@Billy_Built 2 ай бұрын

Grazi

@for-sure-friend 2 ай бұрын

i really want a 300zx. love yours

@PizzaCologne3 2 ай бұрын

dream build forsure

@sirisotyp3 2 ай бұрын

No clue how I made it through this entire video without a ticket or upset neighbor…legit sat in my car and just revved it in the parking lot feeling fast as fuck boiiiii.

@sirisotyp3 2 ай бұрын

With my internet 1000hp.

@Billy_Built 2 ай бұрын

@@sirisotyp3 intranet herseperwers

@typeralex 2 ай бұрын

Z is coming along nicely!

@awmarlow8 Ай бұрын

What hood struts are you using? I’m over my factory hood rod but it felt like all the aftermarket manufacturers of hood struts for the Z32 disappeared.

@HayaiDemoN 2 ай бұрын

I was keep looking the z in the background and thinking did he get another one? But you clear it up later in the video. Nice detailed analysis of the Z

@Billy_Built 2 ай бұрын

LOL yeah. One day I'll get another..

@johnnygeorgopoulos4072 2 ай бұрын

If you ever get another Z, it's gotta be one of those rare convertibles..... and then turbocharge it (don't think they were even available with turbos, right?)

@Billy_Built 2 ай бұрын

I don't think they were offered as a turbo option anywhere. I know of a convertible right now actually that's in really good condition. Although I really do not like any convertible😅

@jeririch1143 Ай бұрын

That plenum looks frikn cool. a u said Merlin top feed fuel rail. u mean polar?

@Billy_Built Ай бұрын

Nope, I have Merlin.

@ingar83 Ай бұрын

To be honest. If it makes 800whp or 1000whp it does'nt really matter as a street car. The ONLY thing that matters is that YOU are happy with how the car works! Everyone can go in to a tuner an have a dream of a 1000hp on the wheels, but at the end it's all about how the car feels after the tune! I want my car to scare me on full throttle, and that threshold is around 700whp myself in my z32. And that power makes me respect my car AND I can drive it reliable.

@kelving.2200 Ай бұрын

Great Z32 Guru, what do you think about the alternate rear hood for the 2+2 model?

@RogueA.I. 2 ай бұрын

I love that intake. It’s much nicer than the original spider version.

@Billy_Built 2 ай бұрын

I agree.. Much lighter and less heat soak too.

@immortaldarkred2154 2 ай бұрын

I would love to buy a mk3 supra shirt if you are down to sell one in the future!

@BananaConquistador 2 ай бұрын

Great vid! Where did you get those air filters? Also, are you running wideband O2 sensors?

@Billy_Built 2 ай бұрын

The air filters are JWT shorty filters. I forgot to mention I'm using the Haltech can wideband setup.

@gamedaygaming2564 2 ай бұрын

hey billy whats up really love your channel just got my 300 last month. question is it possible to run the r35 coil packs on a stock ecu?

@Billy_Built 2 ай бұрын

Thanks, to my knowledge no, not effectively anyway. They need a way to adjust dwell time

@eliasali9383 Ай бұрын

I don't have any vg30dett near by, but found a couple of NA ones. Do you recommend buying a NA and putting a turbo? If I'm buying a NA I'm going for a single turbo build, what do you think?

@farmer3242 Ай бұрын

Also how did you run your motor in with the new wiseco forgies?

@Billy_Built Ай бұрын

You mean like break in?

@8Bitplus 2 ай бұрын

quick question, will the platinum pro support DBW when merlin finally releases it?

@Billy_Built 2 ай бұрын

No. Not to my knowledge anyway.

@farmer3242 Ай бұрын

Great build man, i built my z 10 yeas ago, single TO4Z, custom plenum, single nissan 80mm throttle body, custom everything, link g4 extreme ecu, i used the stock idle air control valve. Did you? I have harder valve springs and my motor chatters around idle a bit, i think its the vct and the idle hunts a little bit. It chatters only when it is at about 950ish rpm. Have you had the chatter or tick tick noise around idle? Does yours burn oil? Mine does, its got JE pistons and eagle rods. Mine has 450rwkw at 21psi, iv done a 11.1 qtr mile with drag tires on.

@Billy_Built Ай бұрын

Nice. Mine doesn't burn excessive oil. Not totally sure what you mean by valve spring chatter. But with forged pistons it's common for them to have piston slap when the engine is cold, and a little VTC rattle on these motors is normal.

@davidjackson3221 2 ай бұрын

📽📽📽🏁👍

@therealphee 2 ай бұрын

Billy. Is your car cobalt green?

@genericexcuse4737 2 ай бұрын

Nissan’s Cobalt Green is a bit brighter shade of green. This is probably closer to Black Emerald, or some other shade that isn’t exactly Nissan spec.

@Billy_Built 2 ай бұрын

Around @22:40 I go into the paint details. It's a Black emerald. But even after owning the car for nearly 15 years I sometimes Struggle to spot the differences unless they're right next to one another.

@idontgotagun9867 2 ай бұрын

Nothing wrong with reps at all, especially with the power you’re making you’ll gap the majority of people who care about reps but have a 200hp Honda or a stock mopar

@eliasali9383 Ай бұрын

I don't have any vg30dett near by, but found a couple of NA ones. Do you recommend buying a NA and putting a turbo? If I'm buying a NA I'm going for a single turbo build, what do you think?