In this exercise we perform simple modeling in Autodesk Fusion 360.
Chapters
00:00 Intro with 2D drawing
00:22 First sketch
06:53 First extrusion
07:31 Second extrusion
07:52 Third extrusion
08:27 First set fillets
09:07 Second set of fillets
09:24 Second sketch
10:07 Creating the holes
10:57 Slicing the body using a plane at an angle
11:36 Final set of fillets
🔥🔥If you have found this video useful and would like to support me, you can buy me a coffee at
www.buymeacoffee.com/CADjungle
If you read the about section, these exercises are intended to help you become familiar with Autodesk Fusion 360 through repetition. These models are not always exact but, are measured for approximation. They also may not always be real word examples, but a guide in software use. When attempting to reproduce models for 3D printing, be sure to verify your own real world measurements for authenticity.
If you enjoy this content, please like and subscribe for more upcoming and progressive videos.
I do not work for Autodesk and currently do not get paid to promote their software.
This channel is independent of Autodesk, Inc., and is not authorized by, endorsed by, sponsored by, affiliated with, or otherwise approved by Autodesk, Inc