this should be an option in the thread tool

Very helpful! Thank you

THis is one of the best design processes I have seen when talking about splines. Now I need to attempt to use this way to make some templates for some parts I am making

Nice! Exactly what I needed

Wonderful tutorial.

Thank you very much for this great tutorial !!!!

I appreciate the clarity you give especially compared to so many other tutorials. Your tutorial was clear and gave me exactly what I needed. Thank you Most tutorials only gave an explanation for methods to create a gear that I struggled to put to use.

I was trying to follow the video along, but when I go to set the radius dimension of the 3 point arc, it says "over-constrained sketch, create a driven dimension instead?" Any ideas?

Thanks for the explanation, I had issues figuring out how to make spiral flutes like that. Anyway, I have some experience with cutting tools and while it certainly looks like a drill, it wouldn't be functional. It's missing all the clearance angles for the cutting edges, making it a cone will make it not cut at all. Also don't chamfer the cutting edge.

Another good video! There is a shortcut method to repeat commands, if you right click, it brings up "Repeat" last command.

excellent

What about the same, but for the internal thread?

Hey let's make a video with voice while eating a candy. 😂

Awesome!

I'm a huge fan of this channel and want to follow this tutorial when it's complete. I've already done plenty of your models following your guides. Keep it up! We appreciate it! 🙏

Thanks. I have a job coming up where I will need to mill such a slot in a pipe on my cnc milling machine. I was thinking of modeling using the coil function but this is way quicker. Silly of me not to think of it because I use emboss for putting serial numbers on 3D resin printed parts I make. :)

How many milmmiters is 1/4 hex?

great video

Great videos man. One thing that will help people streamling command entries is by using the shortcut menu, hitting the "s" key, then type in any command, and you can import commands into the shortcut menu.

Love it!!

What the?!?! I've watched over 1/2 dozen videos on this topic and it's been all move this edge, offset that, loft this, sweep that... now I find the video that uses just 2 chamfers and it's done. Glad I looked it up again - knew there was a better way. Thank you.

This sick project needs an ending!!

great stuff.

please make a part 5 idk what to do from here

please make a part 5 idk how to finish it

haha, this woult have saved me some headaches if I knew it sooner!

I've been using Fusion 360 for 8 years now, started with Solid Design, where everyone does, then at Manufacture workspace with 5 Axis and additive, then Electrnics, then Surface Design, now on Form Design and Generative. I can say I am really advanced but not an expert. And watching this Gentleman's workflow, it is simple and beautiful. Thumbs up and subbed!

Thank you. This is the only video I found that doesn't rely on the timeline method which doesn't work anymore for creating the chamfer

Very useful for beginners, thanks a lot♥

👏👏👏+👍

hi, great video, can you share how did you manage to create the specific light beam from the optics?

Great video. Are you eating or what ist the smacking coming from?

Is that component color an appearance? if yes which one? awesome video! thanks!

Dude, i need to do that but the point at the start and the end of the hole in the cylinder must be at 180º degrees... In your video the hole dont do a half spin... How can i solve this?? Thanks for the video btw is very usefull

Thanks for making this short and like my snapping is now, to the point.

fusion didn't save anything. just lost 6 hours of my life to a circle on my project. I'm so fucking tired of how unstable this program has become.

I had to slightly modify this so I could ADD the knurling to the surface of a thin wall rather than remove it with the first cut. All that required was adding a line to the square so a trapezoid is extruded out of the wall instead of the triangle cut into it. Everything else worked perfect!

I watched a lot of videos on this subject for my project. My search ended here. Thank you.

quick question, how do you mesh the gear teeth?

tnx , I will be sure to watch your videos before blaming autodesk. . ;)

Thank you.

That is boss level! Thanks for posting. Helped heaps.

Does it work with all types of threads? For "BSP Pipe Thread" I can't create a chamfer that's bigger than the small portion that I left unthreaded.

Could you help with CAM for this slot on a regular 3 axis mill?

Fantastic workflow! Thanks for the video

Thank you so much

Fantastic, not frantic as most seem lol. Many thanks! :) Hi from Blackpool UK lol

excellent videos , im working through all of them from the bottom of the list to the top , one question with this one , i would never of thought how to do the hex with a sketch , then revolve ,it still doesnt make sense how it works , how did you ever learn this ? i could of sat here all week and not come up with doing it this way

This works perfectly, and so simple. You are a great teacher as well.

Fantastic tutorial. Well planned, executed and explained for a beginner like myself. Thank you. Gilles