Fusion 360 for Beginners - Lesson 6 - Revolve & Pattern (2023)

Рет қаралды 3,608

Күн бұрын

In this tutorial, you will take a new drawing of a more complex part than last lesson (don't worry, not too complex) and learn how to create it using 3 different methods. You will learn a ton about the following methods:
Revolve, constraints, dimensioning angles, patterns, multiple features within one sketch, and more!
Please don’t forget to like, comment, share, and subscribe!
📚 Check out our Udemy course: www.udemy.com/course/autodesk...
🫶 Help support us: www.learnitalready.com/suppor...
🗣️ Social links: www.learnitalready.com/more/s...
👕 Buy Merch: www.learnitalready.com/more/m...
📝 Read our blog: www.learnitalready.com/more/blog
💰 Save 20% on a Fusion 360 subscription by using this referral code: aklam.io/jVIc5t
Here’s some of the gear I use and can recommend: (Please note these are amazon affiliate links and I may receive a small commission, which is not added to the cost of any item, when you purchase products through my links)
🐁 3D Connection SpaceMouse Pro: amzn.to/3VZzN8z
💻 Apple 2023 MacBook Pro Laptop M2 Pro: amzn.to/45rBQ64
🎙️ Audio-Technica AT2020USB+ Cardioid Condenser USB Microphone: amzn.to/463rTNm
📺 PHILIPS 27" 4K Monitor (Latest version of what I use): amzn.to/440ix4O
🎧 Sony WH-1000XM4 Wireless Premium Noise Canceling Overhead Headphones with Mic: amzn.to/3sJyZYR
⌨️ Logitech mouse and keyboard combo: amzn.to/3xx3fZ8
🏦 Wise Online banking - Fee-Free Transfer: wise.com/invite/ihpc/taigrantf
Specials for Canadian residents:
📱 Public Mobile $10 discount off plan: publicmobile.ca/en/bc/plans?r...
💵 Simply Financial No Fee Account: blue.mbsy.co/6sFMBW
00:00 - Start
0:23 - Our lesson drawing
0:33 - (Link for last lesson)
1:04 - Create a component
2:00 - Start making our tubular part
3:04 - Create the c-bores
5:35 - Constraints! Constraints!
6:18 - Coincident constraint
8:46 - What about the other c-bores?
9:53 - Dimension angles
11:11- Equal constraint
12:15 - Create the c-bores #2
13:45 - Learn another way!
14:55 - Revolve
17:26 - Create those c-bores #3
18:19 - Pattern those c-bores
19:49 - Which method did you enjoy more?
20:41 - Even a better way?
21:50 - Concluding comments
#learnit #fusion360 #tutorial #drawings #manufacturing #beginners

Пікірлер: 45

@kdatrio 3 ай бұрын

Thank you for showing the two methods but then combining them into the "correct" way. Love the content and very thorough....will keep watching / liking / and commenting some

@learnitalready 3 ай бұрын

Much appreciated! Thank you for your comment and support!

@karolosmanski2309 5 ай бұрын

Another excellent video, another lesson learned, another comment and thumb up for Learn It!

@learnitalready 5 ай бұрын

Thank you so much! We are grateful that you enjoy and are benefiting from our tutorials so much.

@hansfritzmiller1846 Жыл бұрын

At first, I thought your lesson was beneath me🙄. But I stuck it out, and actually found a bit or two that got the brain gears turning. Thanks! 🙂

@learnitalready Жыл бұрын

That’s a humble comment! Thank you. I often felt that way about tutorials too, but learn tons from them including shortcuts and extra tips and tricks throughout. Remember, that these tutorials will get more and more complex as they proceed. Have you watched any of our other videos yet? We have some more advanced tutorials in our Short Tutorials and CAM playlists. Stay tuned for more and thanks so much for your support! Here are the other playlists as mentioned above: Short Tutorials: kzfaq.info/sun/PLLm7Yjr9z_z0GjYh4AvGC660HXPbQwB7W&si=krT9Zz-zfsQDzHoE Metal CAM kzfaq.info/sun/PLLm7Yjr9z_z24oVrRH8IOfpblwltoGhbS&si=kRrFp1SilzuaPK7x

@frankbonsignore.RochesterNY 7 ай бұрын

I appreciate your patient explanations.

@learnitalready 7 ай бұрын

Thank you!

@donaldweeks7089 6 ай бұрын

A great detailed video with simple explanation of reasons.

@learnitalready 6 ай бұрын

Thanks for your comment! Glad you enjoyed it!

@sultanrome7247 19 күн бұрын

Both methods are good but component 2 is easy. in my opinion your teaching is very very best.A lot of thanks

@learnitalready 19 күн бұрын

Wow! That is a very kind comment. Thank you so much for saying and for taking the time to write.

@lisacox9809 Ай бұрын

Thank you for this series. You are a great teacher..

@learnitalready Ай бұрын

Thank you so much for commenting and your encouragement. Hope you keep learning with us and enjoy our other tutorials too.

@user-zk7tw5os1g 10 ай бұрын

New to your channel - CAD skills are improving with each video I watch!

@learnitalready 10 ай бұрын

Welcome aboard!

@richiemag22 7 ай бұрын

Great Video ! so easy to follow.

@learnitalready 7 ай бұрын

Thanks. So glad you enjoyed it!

@artemgoncharenko646 11 ай бұрын

Greate tutorial for the beginners! Especially good that you cover several ways to reach the goal. And you sounds like a person who likes what he doing ))

@learnitalready 11 ай бұрын

Thank you so much for your nice comment and support. We are going to keep trying to improve with our tutorials, and kind comments like yours are super encouraging.

@artemgoncharenko646 11 ай бұрын

@@learnitalready When I tried fusion foe the first time, I faced the problem when the video is clear but you can't repeat it by your own, the skill is absent .In this case a simple homework task would help much.

@learnitalready 11 ай бұрын

@@artemgoncharenko646 Excellent suggestion. Thank you! I will have to implement that in future tutorials.

@TheInamsheikh 3 ай бұрын

understandable method and speed carry on the lessons please

@learnitalready 3 ай бұрын

Thanks so much!

@hanspijpers2100 9 ай бұрын

I sketched a 1.5 construction line from centerpoint vertical to fid the borehole centerpoint.

@learnitalready 9 ай бұрын

Great job! 👏

@althe111 Жыл бұрын

You are an excellent instructor, thank you for your good work. By the way, your voice reminds me of another excellent Fusion instructor here on KZfaq.

@learnitalready Жыл бұрын

Thank you for your comment! That was very kind of you to say. I’m curious to know who I sound like. 🧐

@althe111 Жыл бұрын

@@learnitalready His name is Vladimir (I think) but he has the Desktop Makes channel.

@learnitalready Жыл бұрын

@@althe111 He’s got some great videos! Glad you are pursuing your learning on Fusion 360 through many sources. Lots to learn with this amazing program.

@robberlin2230 Жыл бұрын

This is awesome, I am still a little hazy on sketch, component, feature and how they all work together but I'm getting there.

@learnitalready Жыл бұрын

Thanks for letting us know and for your support. We will try and explain that clearly in a feature tutorial. Thanks for the idea.

@305doveridge 11 ай бұрын

that was another great video. I appreciate you doing this!

@learnitalready 11 ай бұрын

Thank you! We appreciate your kind comment and support. Stay tuned for more.

@joell439 3 ай бұрын

👍👍😎👍👍

@learnitalready 3 ай бұрын

👍

@frostshock13 Жыл бұрын

I like doing sort of a hybrid of this I like the top sketching more, but prefer to use pattern. I didn't do the hard way as using a pattern made more sense. I am curious outside of having a part that has the same size holes/features, but not equally spread out. What are some other use cases for doing the harder method you described?

@learnitalready Жыл бұрын

Excellent comment! You’ve got the main gist of it… sketching the harder way, by sketching each angle, would be used for times when features like holes are not equally spaced or patterned. This tutorial is just showing the basics of being able to come to the same conclusion using different methods to prepare students be able to understand more difficult sketching in the future. I appreciate the comment very much. Thanks for tuning in. Feel free to comment on any tutorial you watch. Take care!

@eligiodu 7 күн бұрын

When you click "finish sketch" at 2:47 your drawing switches to an isometric view. I'm unsure as to what I'm doing diffeant, my drawing remains in the "top" view. For those who are experiencing this hover your cursor over the "view cube" upper right, a small "house" looking icon appears over the top left of the view cube, click on the house and your drawing will switch to the isometric view.

@learnitalready 7 күн бұрын

Excellent! Thanks for posting this.

@boboscurse4130 10 ай бұрын

When I try to define the second 120 degree angle at 10:25 I get an "overconstrained" error.

@learnitalready 10 ай бұрын

Impressive! You’re flying through these tutorials. Over-constrained dimensions happen when you apply two constraints that constrain the exact same feature. Review carefully what you have dimensioned or constrained and try to discern what has been constrained twice.

@frankbonsignore.RochesterNY 7 ай бұрын

A tad frustrated right now.

@learnitalready 7 ай бұрын

Hello! What is causing you trouble? Please let us know. We hope to help.

@frankbonsignore.RochesterNY 6 ай бұрын

Sorry it took me so long to reply. I am trying to follow on by doing what you are doing and I can't see it well enough to do EXACTLY what you're doing. so I noticed you have some new videos and I'll try those. Your videos are very good, it's just that I'm slow at this stuff.@@learnitalready