Fusion 360 | More than meets the eye?
Рет қаралды 7,480
9 ай бұрынCreating a concave top face on a simple cuboid.
Link to Reddit post:
/ how_would_you_model_th...
Link to starting file:
a360.co/3Mwxhkm
If you have found this video useful and would like to support me, you can buy me a coffee at
www.buymeacoffee.com/fusion36...
or you can also support me on Patreon at
www.patreon.com/fusion360scho...
Disclosure: Autodesk has kindly sponsored the full version of Fusion 360 that is used to produce the videos on this channel. That being said, Autodesk has no editorial control over the content on this channel. I am still an independent creator with the aim of creating videos that help viewers in using Fusion 360. These videos are not meant to promote Fusion 360 as a product.
#fusion360school
@Nightxp 9 ай бұрын
Thanks so much for checking out my Reddit post and making this video! I’m not used to surface modelling so will definitely be getting onto that now! This was great to see and glad it wasn’t a straight forward model to make. I trued a few methods but kept getting effects I didn’t want. A life saver of a video!
@Fusion360School 9 ай бұрын
Glad to help. Always a pleasant surprise to see OPs respond to these videos. If you don't mind me asking, what is that thing?
@Nightxp 9 ай бұрын
So it’s a rubber speaker stand that I needed to recreate from 3D printed TPU, I ended up 3D scanning the part as I couldn’t get the shape quite right to match the original one.
@ianpendlebury3704 9 ай бұрын
Good to see your subscription numbers climbing. Very much deserved. As always, a clear and thoughtful presentation.
@vvviiimmm 9 ай бұрын
Thanks for sharing. It would be useful to compare the resulting surface curvatures with isocurve analysis
@EndMotive 9 ай бұрын
Great tips! I don't think I have every used the "replace face" tool, looks like it could be useful for some of my projects.
@wellphoto3d 9 ай бұрын
Thank's
@moonblad 9 ай бұрын
Nice work. The curvature when viewed from the front seems like it's an arc, and might fit a larg urn. How about cuting away the top of the square block with a revolve command?
@Fusion360School 9 ай бұрын
This seems promising. I attempted to revolve with the sketch profile that was used to create the side cut but it cut the solid in a weird way. I probably need to adjust the profile to make it work.
@cpetroleite 9 ай бұрын
Muito obrigado pela aula!
@piranin666 9 ай бұрын
Thx!!
@johnnycomelately6341 3 ай бұрын
Could this be done in freeform with some measurements to control things?
@happywanderer5632 9 ай бұрын
Fusion deperately needs an upgrade to the sketch environment. Sketches are fundamental to using the program, and yet so poorly implemented that the program becomes unstable, erratic and inconsistent. I don't think Autodesk put their best programmers on this product