Fusion 360 | Shell, Web and Rib?

Рет қаралды 15,913

Күн бұрын

Let's take a look at using the shell, web and rib features in creating this model.
Link to Reddit post:
/ can_someone_help_me_wi...
Link to starting file:
a360.co/3wk80Vh
If you have found this video useful and would like to support me, you can buy me a coffee at
www.buymeacoffee.com/fusion36...
or you can also support me on Patreon at
www.patreon.com/fusion360scho...
Disclosure: Autodesk has kindly sponsored the full version of Fusion 360 that is used to produce the videos on this channel. That being said, Autodesk has no editorial control over the content on this channel. I am still an independent creator with the aim of creating videos that help viewers in using Fusion 360. These videos are not meant to promote Fusion 360 as a product.
#fusion360school
0:00 Intro
1:03 Shell
4:51 Boss
7:15 Rib

Пікірлер: 31

@Fusion360School 5 ай бұрын

For the rib sketch, it is actually not necessary to snap to the boss. The project->intersect step could have been skipped. If you terminate the line away from the boss, the rib command would automatically extend the wall to the boss. Also, you can simply draw the line through the boss and perform a cut to remove the excess from the boss hole. Happy Lunar New Year to all viewers who celebrate! Wish you all good health in the year of the dragon!

@Brickalistic1977 19 күн бұрын

I found that at 4:48, to make life easier, you can use the extrude command and for extend, select "to object", and from there select the correct face.

@TheRealStructurer 5 ай бұрын

Every time I watch your videos I learn something new. Very well explained. Thanks for sharing 👍🏼

@johnagorman 5 ай бұрын

Sensational! I've never used some of these tools - Web, rib, intersection... Thank you!

@MarcelHuguenin 5 ай бұрын

Thanks! There's a great tip in every video! Instead of using a sketch and splitting the body for the area in front of the tunnel you could also do a press/pull of the vertical face.

@Fusion360School 5 ай бұрын

Thank you for your support! Ahh, did not think of that. I went back to try this. It works.

@darranedmundson1505 5 ай бұрын

I've been using Fusion 360 design and manufacturing spaces for 5 years... and I still learned a few tricks: the look-at and the section view options in the Sketch dialog, and not having to fully extend the rib sketch. Nice tutorial.

@TimeWasted8675309 5 ай бұрын

Thanks! You always show such inventive ways of solving complex shapes.

@Fusion360School 5 ай бұрын

Thank you for your support!

@CoryCharlton 5 ай бұрын

So many good tips in such a short video. Keep up the great work!

@jamesthompson4062 5 ай бұрын

You always do such good helpful tutorials, thank you 😎

@ianpendlebury9503 5 ай бұрын

I always learn some new angle or approach from watching your videos. Thanks and Gong Xi Fah Chai.

@Fusion360School 5 ай бұрын

Thank you!

@noahkatz9616 5 ай бұрын

Very educational, many thanks!

@jamesx7424 5 ай бұрын

Really outstanding review of some less well known design features. Love the channel.

@Fusion360School 5 ай бұрын

Thank you for your support!

@jonlyons3601 5 ай бұрын

Slice and look at..How did I not know about those??!?!

@jonlyons3601 5 ай бұрын

Thanks!

@Fusion360School 5 ай бұрын

Thank you for your support!

@RussPitcher 5 ай бұрын

Thanks

@Fusion360School 5 ай бұрын

Thank you for your support!

@aretinolomaestro5031 5 ай бұрын

Grazie.

@Fusion360School 5 ай бұрын

Thank you for your support!

5 ай бұрын

Obrigado!

@Fusion360School 5 ай бұрын

Thank you for your support!

@mjm2363 2 ай бұрын

Good afternoon, an excellent video, but I need your help. When I use the web command to circle, the command takes the trajectory of the web towards the x or y axis, not the vertical one, which would be the z axis, which is the one in the example, and an error appears. . Also, I don't have all the commands that appear in your video in the web command. can help me thank you

@VinayVarsani 5 ай бұрын

A clean video as always 👌🏾 just a quick question re the rib: what is the benefit of using the rib command as opposed to just thin extruding the profile? Surely with thin extrude you could have any curve without necessarily having a horizontal and vertical start/finish and also extrude both sides at once? I can't remember but i would imagine there is a "to object" extent type.

@Fusion360School 5 ай бұрын

With thin extrude, you can only "thicken" along the sketch plane.

@Fusion360School 5 ай бұрын

To add on, a thin extrude would be possible if the rib is just a horizontal straight line through the boss. In that case, the sketch would need to be performed on a sketch plane parallel to the top plane. But there would still be a limitation as the thin extrude would not be able to conform to the cylindrical face of the boss.