As I follow along it seems so easy, but the minute I'm off on my own I get stumped occasionally. I will just keep at it as I'm sure this will get easier with repetition. Thanks for the video. Also, I don't mind at all about the length. I could watch videos like this all day especially when it's about a topic that I want to increase my knowledge on.
@PetePanaia3 жыл бұрын
Thank you Lars! I am designing an assembly made from multiple parts cut from 6.35 mm 5052 aluminum. I have been living with the Sheet Metal tools of Fusion 360 for some time now. Some really useful tips and reminders in here! So glad you are back! Thanks again! 👊😎
@cadcamstuff3 жыл бұрын
Awesome to hear, Pete. Thank you for watching!
@KAL00KI3 жыл бұрын
I don't work with sheet metal, but watching this gave me some much info for other jobs. Lars, you're a star.
@cadcamstuff3 жыл бұрын
Haha, Thank you so much for the kind words
@IanJohnstonblog3 жыл бұрын
Awesome video as always. “If you double click on a line, it will select the whole thing” got a whaaaaa?!! from me. I’ve been using Fusion for a long time, and did not know you could do that.
@d2doctor3 жыл бұрын
Likewise! Also, when extruding, just clicking on a surface automatically extrudes to object. Very useful.
@Benctmoi3 жыл бұрын
Thank you Lars, added few tools to the toolbox. Oh... i love the "I know it is going to be a long video, but here another trick". You can give us as many tricks you want, I'll take it.
@cadcamstuff3 жыл бұрын
Thank you, Eric. I'm happy you find the video helpful
@TheJedc433 жыл бұрын
As always sir, grest job!!!! I am a sheet metal fabricator and I have commented on K factor in the past. When I get some free time, I will email you some useful tips for any future sheetmetal videos. TAKE CARE.
@cadcamstuff3 жыл бұрын
Thank you so much, Marc! And thank you for watching!
@vaughnmanagan27403 жыл бұрын
You are a top shelf teacher.
@xiajack3 жыл бұрын
Learned lots of stuff, thank you! And I also noticed a little interference between the the door and the bracket.
@koenverelst72223 жыл бұрын
Hi, i'm new to Fusion. this tutorial really inspired me a lot. this example showed really a lot of tools and possibilities. Thanks a lot
@graycox643 жыл бұрын
I hope they keep to their word on the licence more sheet metal please Lars
@MikaelJSandersson3 жыл бұрын
There really should be an embossing tool for sheet metal. For the dimple.
@WARFYTR3 жыл бұрын
The dimple trick doesn't factor in the material thickness. The inner side should be larger than the outside.
@mmmmmmm87063 жыл бұрын
Awesome, thanks Lars! +1 for the woodworking question. Recent update has an extension for laying out parts on a ‘sheet’. Forgot what its called.
@cadcamstuff3 жыл бұрын
The new arrange function. Yes, I will have to cover that the best I can when I get to the manufacturing workspace. I think the next video will be assemblies
@davebarkerdesign Жыл бұрын
Excellent video..always learn something new. Great job!
@thesatelliteguy2 жыл бұрын
Great Video Lars! Thanks a lot and keep them coming
@Dimitri.van.der.Poorten3 жыл бұрын
Thank you Larsen for the series top top
@deangood11423 жыл бұрын
Thanks a very good video and as always interesting. tips and reminders are always good.
@cadcamstuff3 жыл бұрын
Awesome to hear. Thank you for watching!
@Eitanbarazani3 жыл бұрын
Are there any changes related to woodworking and if so are you planning a video describing them?
@cadcamstuff3 жыл бұрын
I think that comes down to what you are trying to do. I covered What's New in Parts in the last few videos. That applies to woodworking. Next is What's New Assemblies, that could help you build a dresser etc.
@Grazvius3 жыл бұрын
You should check JoinerCAD. This is add-inn dedicated for woodworkers.
@Eitanbarazani3 жыл бұрын
@@cadcamstuff I was hoping some video about Arrange/Nesting.
@Eitanbarazani3 жыл бұрын
@@Grazvius thank you. I will check it out.
@IceCreams623 жыл бұрын
Thanks a lot Lars. Stay safe
@cadcamstuff3 жыл бұрын
Thank you so much, You do the same
@mitch6025 Жыл бұрын
Really good! thank you
@mohammadjavili82213 жыл бұрын
Enjoyed it... as always , thanks :)
@cadcamstuff3 жыл бұрын
You are so very welcome. Thank you for watching!
@dougryde37673 жыл бұрын
Why do i feel like ive been screwed over from Autodesk..Was spending time to learn this program with a view of buying it if it was for me..Now they can go jump ill go elsewhere thank you
@channel01233 жыл бұрын
why what happened? i seeing lot of people complain
@raddog19822 жыл бұрын
great video. I learnt a lot
@IBHoevelbrinks3 жыл бұрын
Tank you for the very helpful tutorial!
@cadcamstuff3 жыл бұрын
You are so very welcome, thank you for watching
@RinksRides3 жыл бұрын
32:00 neat hack. :D
@cadcamstuff3 жыл бұрын
Happy you like it
@CodyLatimer-be4cb7 ай бұрын
Cannot set sheet metal rule to thickness . New fusion had to move things that didn't need to. Your videos helped so much and for a program to become more confusing is beyond me. But thank you for posting
@brianburns3356 Жыл бұрын
Lars its just great like all your videos
@husseinfarah48923 жыл бұрын
Thank you Larsen for the series of episodes that helped me a lot with Fusion 360
@cadcamstuff3 жыл бұрын
Awesome to hear. Thank you for watching
@estenberg23 жыл бұрын
I've used 3D-printed parts in order to create tooling parts for shaping sheet metall. Wouldn't it be a cool option if you create a sheet metall object and from that can create the tooling part/parts with the click of a button? Is there any option for that in Fusion or any other CAD-program today?
@cadcamstuff3 жыл бұрын
You could use something like the boundary fill or boolean operation to do something like that. That would make for a fun video
@estenberg23 жыл бұрын
@@cadcamstuff Thank's Lars. I'll see if I can figure that out :)
@thomasandkimcowieson83403 жыл бұрын
I liked the different methods of achieving the same goal.
@cadcamstuff3 жыл бұрын
Glad to hear that :-)
@davematthews76863 жыл бұрын
That was a great video and got me thinking of uses. I don't have a waterjet or plasma cutter but I can laser out a paper pattern or maybe find a format that the wife's Silhouette cutter will speak. You could even build little folded paper constructions.
@cadcamstuff3 жыл бұрын
Thank you, Dave. And thank you for watching
@aeiou45153 жыл бұрын
Hey Lars, great to see you back, thanks for the video pal 👍🏻
@cadcamstuff3 жыл бұрын
You are so very welcome. Thank you for watching!
@brucefox65803 жыл бұрын
Thanks Lars, always useful info.
@cadcamstuff3 жыл бұрын
Very glad that you find the content useful
@adambergendorff27023 жыл бұрын
another absolutely AWESOME video!
@cadcamstuff3 жыл бұрын
Thank you so much, Adam. Thank you for watching
@groensewe3 жыл бұрын
Hi Lars, great tutorial I have really learned a lot about Fusion watching your video's.Your explanation on processes is well thought out and extremely well explained.Could you help me with a problem please? I have sketched up a part in 2D which has various cutouts and needs to be rolled, how do I create the 3D model of this part in the sheet metal workspace?
@elong703 жыл бұрын
Thanks - very helpful
@Jackalbeez3 жыл бұрын
How do you create outside miters? I am working on a drawing for a tank and I would like to have a 2" flange going around the top edge of the tank, which will allow the tank to rest on this flange when placed in the frame. I would like to have each flange to meet at the end with a 45 degree miter for welding. I just can figure out how to create the mitered corners.
@robertprice53973 жыл бұрын
Hey Lars great content. You have any other ideas about dimpling?
@rowycoracing3 жыл бұрын
Glad you are back.
@cadcamstuff3 жыл бұрын
Thank you
@adzakadol36013 жыл бұрын
HI Lars I want to add a flange to the rounded ( arc ) edge on a sheet metal pattern. How would I be able to do that? It doesn't allow it as a bend or flange.... It only allows for flanges to be added on straight sections.... Help?
@MatthewTinker-au-pont-blanc3 жыл бұрын
Interesting content! Well done! Hardly a "kinda" in sight!
@cadcamstuff3 жыл бұрын
Thank you :-)
@jcjimenez53273 жыл бұрын
Hi Lars good to see you back at it. The problem that I’m having with flat pattern is when I create a flat pattern and I’m going to the manufacture of space to use my plasma cutter it it refolds the pattern back up and won’t let me use it or am I doing something wrong please and thank you any information would greatly appreciated
@Brownstone313 жыл бұрын
That takes the fear out of the sheet metal section. thanks
@cadcamstuff3 жыл бұрын
You are so very welcome. Thank you for watching
@matteodelninno77363 жыл бұрын
why place the decimal if you don't have any other sig figs? habit?
@NostromoVA3 жыл бұрын
Great tutorial!
@cadcamstuff3 жыл бұрын
Thank you!
@mgas12373 жыл бұрын
Great to see you back Lars :) Keep up the good work.
@cadcamstuff3 жыл бұрын
Thank you so much! Thank you for watching
@johnvanyperen42992 жыл бұрын
Hoi Lars This is a very good livestream for the sheet metal f-360 user Flanges extrude folding assemble joint revolute ... but how do people in america call this part: Bracket ? Can you change this in: Suspension bracket or Mounting bracket for blinds, Side supports or Mounting supports.
@evanlacava92133 жыл бұрын
Daily Lars vids 👌🏻👌🏻✅
@cadcamstuff3 жыл бұрын
I wish I had the time :-)
@solarguy60433 жыл бұрын
No thanks, Autodesk has burned the bridge for me.
@channel01233 жыл бұрын
why what happened? i seeing lot of people complain
@solarguy60433 жыл бұрын
@@channel0123 The free version just lost a bunch of features to "encourage" people to buy the "real" version. And you can't just buy the "real" version, it's 50 or 60 bucks per month forever. Well, until they decide to change the deal _again._ Lars explains the changes pretty well if you look at his recent video.
@channel01233 жыл бұрын
@@solarguy6043 ok, i will check his video, very strange their new changes. sounds more confusing now. thanks for the info
@BlackSmokeDMax3 жыл бұрын
Pretty sure it was done because it was to easy for people who should have been paying to lie and get it for free. Don't think they'll come out and say that though. But it seems reasonable.
@solarguy60433 жыл бұрын
@@BlackSmokeDMax Then pursue the cheaters, don't penalize the makers that did much of the beta testing for autodesk....at no cost. Thanks for nothing.
@d2doctor3 жыл бұрын
Thank you as always :) I love the sheet metal stuff. Its amazing how simple and intuitive it now is, compared to when I used to do that sort of stuff 2 decades ago in 2D Autocad! I almost want to go out and find an application for it so I can have a play with it ;) Question: once the design is flattened out, is the output of that to DXF the feature which is now limited to the pro version?
@cadcamstuff3 жыл бұрын
Thank you for watching. Yes, you can still export a sketch as a dxf. You you could project the flat pattern in a sketch and export that. You could also program the part in the 2D CAM workspace and send the code directly to the machine and avoid the dxf.
@herbertmoessmer54243 жыл бұрын
Was mich interessieren wuerde sind verschiedene biegeradien in eine blechteil und auch bestehende radien nachtraeglich vergroessern. ebenso wie ein gewinde in zeichnungen bemasst werden kann. diese arbeit hier --- wie immer gut gelungen. danke
@cadcamstuff3 жыл бұрын
Sorry, I only understand English and Danish
@herbertmoessmer54243 жыл бұрын
@@cadcamstuff Hvad der ville være af interesse for mig er forskellige bøjningsradier i en metalpladedel og efterfølgende forstørre eksisterende radier. ligesom en tråd kan dimensioneres i tegninger. dette arbejde her --- som altid godt udført. tak skal du have
@herbertmoessmer54243 жыл бұрын
What would interest me are different bending radii in a sheet metal part and also enlarge existing radii afterwards. just as a thread can be dimensioned in drawings. this work here --- as always well done. Thank you
@sijmengrunbauer76973 жыл бұрын
@@herbertmoessmer5424 Thats a really good point. I never thought of a sheet metal part having 2 bends, each with a different radius. Now i wonder how to do it.
@herbertmoessmer54243 жыл бұрын
@@sijmengrunbauer7697 ich habe viele designerdunsthauben konstruiert und gebaut, da wurden jede menge verschiedener radien benoetigt
@rickwallace62703 жыл бұрын
Hi from Australia
@cadcamstuff3 жыл бұрын
Hi Rick, Thank you for watching
@TommiHonkonen3 жыл бұрын
6 years from now when i open the document i just question the way i designed it
@cadcamstuff3 жыл бұрын
Tru, I can't remember what I had for dinner last night :-)
@Casiyounadatube3 жыл бұрын
Very cool, I don't do sheet metal but this can be used to build 3d models out of paper or 3D printing. Also cutting wood with laser.Can Fusion 360 do also surface layout optimization when you have to cut the sheets of material? Thank you 😊👍
@cadcamstuff3 жыл бұрын
Hi Daniel, Thank you for watching. Yes, that is the new arrange function that I need to make a video on soon .
@thomasandkimcowieson83403 жыл бұрын
Great video as always. Is there away for fusion to put in bend parameters of a press brake to know if you can “ACTUALLY “ build the part. I’ve made several sheet metal parts that I had interference with the press brake tooling
@cadcamstuff3 жыл бұрын
That is a good question. The only thing I can think of is to maybe make a part that is the press brake and check if the fold would fit within it. No easy solution
@jimshort31903 жыл бұрын
Can you somehow send through the import file for this?
@metromfg3 жыл бұрын
Lars when are they ever going to add hemming to sheetmetal?
@cadcamstuff3 жыл бұрын
That is a good question. I don't remember seeing it on a roadmap, but it has to be on the development teams radar
@rufustoad1 Жыл бұрын
Why have you quit doing these videos? I hope your health is OK??
@jameswoods51893 жыл бұрын
HI Lars, can you help me with a flat pattern? I have tried everything and can't get it to flat pattern. I made a solid body and then created a shell. Is it possible to flat pattern it?
@spencerhazelwood93553 жыл бұрын
dont turn it into a shell but turn it into sheet metal part
@jameswoods51893 жыл бұрын
@@spencerhazelwood9355 thanks for the reply. I have tried that, but sheet metal only seems to work with flat and straight parts, I am trying to make a flat pattern of a slightly curved surface so it simply doesn't see it as something that it cam do that with. I was wondering if there is a trick I am missing. If you can help that would be amazing.
@alexanderjohnsen42572 жыл бұрын
kan du ikke snart få dit viking skæg tilbage :-)
@brianhatley59633 жыл бұрын
I really appreciate your video lars, looks like ill be subscribing to your channel, and fusion 360!
@cadcamstuff3 жыл бұрын
Hi Brian, Thank you so much, and thank you for watching the videos
@HOUSEDESIGNBYENGG3 жыл бұрын
Make a video on reverse engineering with exampl
@cadcamstuff3 жыл бұрын
I would love to know what specific you are looking to reverse engineer? A space shuttle or a spoon?
@crozwayne2 жыл бұрын
Again, not enough explanation and way too quick. Could you not go a little slower? like the way you describe sheet metal rules? i had to watch someone else Fusion youtube videos to understand this, also how on earth did you make the thickness by default, 1 mm? the little things like this cause so much infuriating grief with Fusion, i am a paid licence user btw
@josephwilliamcosta3 жыл бұрын
Fusion360 is dead. Start doing freecad videos now please.
@COdrummaCO3 жыл бұрын
Joseph Costa what? No lol
@jothain3 жыл бұрын
You do realize that he's heavily tied to Autodesk? 😊
@nickrowan3 жыл бұрын
Why? Because they've put a few restrictions on their free software? Don't be dramatic.
@COdrummaCO3 жыл бұрын
nickrowan so pay for the software lol
@nickrowan3 жыл бұрын
@@COdrummaCO I was replying to Joseph saying that "fusion360 is dead".