thanks for watching 👍

Great to hear, glad you enjoy the vids, Thanks for watching.

No problem, glad it helped.

Thanks Tony, glad you enjoyed it. thanks for watching.

No problem glad it was useful. Thanks for watching.

Glad it was helpful!

Thanks, lots of rifles I need to get my hands on, never had a HW110 before but I do want to do some other rifles in the future so ill keep the 110 in mind. Thanks for watching.

Thank you and thanks for watching 👍

So nice of you, yep ill try and make one soon. Thanks for watching.

@@sub12airgunners thankyou sir for ur reply I'll be waiting to c it soon 🙏

thank you for watching 😀

Glad you liked it! thanks for watching.

Glad it was helpful! Thanks for watching.

that's normal on a standard sub 12 gun nothing to worry about 👍

Thank you Sir, I was informed by FX this is normal too... It sounds terrible none the less!!! I will check the operation of the power wheel with my chrono@@sub12airgunners

Welcome aboard! Thanks for watching.

Thanks, forgot to mention in the vid this rifle is fitted with the 300mm liner so the hammer weight is needed, on the longer barrels its probably not fitted. Thanks for watching.

Thanks, good to see you like the vids. Thanks for watching.

Thanks for watching

Thanks, much appreciated, glad you liked it. Thanks for watching.

Can I contact you?

This is my name Hak Hak

Difficult question, there are a few that I could suggest, I think for an out of the box rifle it would be hard not to suggest Air Arms ultimate Sporter R, what they make works great and is well thought out and engineered, they are, in my opinion a little boring, but they defiantly do what you want them too. Other than them FX do make very nice stuff, and most, not all though, of FX products are absolutely fantastic, its not until you go back to other rifles when you realize how good the FX rifles are, for a sub 12 rifle, I would recommend the Dreamline classic or tactical, that, I believe is the best rifle FX make for sub 12 out of the box. Thanks for watching.

To be honest everyone I have seen has been good out the box, you obviously have to check the rifle does not have any cosmetic damage but apart from that if it hasn't been messed up by the previous owner or shop it should be good to go, I would go for the Dreamtac or Dreamline classic with the wood stock, as the Dreamlite is not very comfortable to shoot. But apart from that I think they are great little rifles. Thanks for watching.

Sorry I don't sell it, have you spoken to FX? Someone else I know had the same problem and he got a replacement part from FX, not sure if it was modified though as he had it fit by his RFD. But worth a Email at the least. Thanks for watching.

100% Dreamtac, no question, its a much better built rifle with a more stable chassis, it performs better than my maverick and I have never had a problem with this rifle and its done over 20,000 pellets. I personally don't like the maverick and can't recommend them. Thanks for watching.

You can find the sizes and number on the FX website, they give all the different sizes for each model, some of the o rings a little hard to find so I use a few different O ring suppliers but mainly simply bearings,A full tear down normally only happens when we first get the rifle, or when something goes wrong, the reg gets serviced every few months or so, but that's not necessary for every rifle, barrel cleaning happens usually when we start to see excess flyers in the groups, or when the accuracy drops significantly. That's quite a lot of air to be loosing, it could be coming from a number of places so you are best off finding the leak and replacing the o rings around it. Thanks for watching

Thanks, glad you liked it. Thanks for watching.

Very good question, I have just had a look on my rifle and the Wika gauge will just fit, it sticks out further from the body and the cylinder goes behind it, if that makes sense. the only thing is I don't know if you could guarantee that you could line the logo with the bottom, it may be rotated one way or the other. but on my rifle at least it fits fine. Thanks for watching.

@@sub12airgunners Thanks for taking the time to get back to me - it’s much appreciated - Good to know it fits - I think knowing I have an accurate fill is more important to me than having the readout ‘vertical’ - Thanks again 👍

Thanks for your interest here the link, although I think you may have found them already. Thanks for watching. www.ebay.co.uk/sch/geoffeve-7/m.html?item=373576473624&hash=item56fae49c18%3Ag%3AJ5EAAOSwNwpgWKA7&rt=nc&_trksid=p2047675.l2562

Thanks, go for it, the dreamlines are nice and simple to work on so its no big deal, the trigger was just something I made, a couple people asked so ill make some and stick them on ebay. Thanks for watching.

@@sub12airgunners thank you i will keep checking to see when they are available, i will be needing 5 off them 😀 thank you again, brilliant stuff

I made it, we do sell them on eBay but we are currently out of stock. Thanks for watching

it's a copy of a very old AR15 match trigger it works very well 😁

@@sub12airgunners Looks good and suits the rifle. Where do you purchase those or did you make it?

With the short barrel you have to use the FAC spring to get 12 ft/lb out of the rifle, I believe the Dreamtac compact will only achieve low power in the short barrel configuration, with the larger calibers and longer barrels you get more power but in the .177 barrel you need the FAC spring to get 12ft/lb. Thanks for watching.

@@sub12airgunners That's interesting to hear. Does it come from the factory with the fac spring? The .22 short tac compact barrel too?

Next time I take it off ill have a look. Sorry I can't take on any private work, I am a bit too busy at the moment. Thanks for watching.

@@sub12airgunners thank you very much, would be appreciated.. and I understand, just thought I would offer as appreciate your work..

Sounds like a reg issue, you could try rebuilding the regulator and making sure everything is alright in there. second have a play with different reg pressure and hammer spring settings. Thanks for watching.

@@sub12airgunners Thanks, it settled down a bit after upping the pressure to 75 bar, Still 20 fps spread. It will shoot with 6 fps spread when dialled down to 8 fpe. something is wrong here, or my chrono reads over 100 fps low. Ordered full service kit and new chrono, no airgun shop around me want to compare chronos, and they say they will destroy the gun if i come in to check it and it shoots hot!!!

Heres a link to my ebay, I have the tools I make listed. www.ebay.co.uk/sch/geoffeve-7/m.html?item=373576473624&hash=item56fae49c18%3Ag%3AJ5EAAOSwNwpgWKA7&rt=nc&_trksid=p2047675.l2562

Yes I did! thanks for your interest.

hi sorry no we don't do work on peoples guns

On the Dreamline yes, thanks for watching

I really appreciate the interest, but I don't have an RFD licence so I can't work on other peoples rifles, maybe one day. but for now I can't. Thanks for watching.

If you have a spot open on your FAC ticket then yes, but you are better off buying an FAC rifle from the factory, you will get the right spring and reg pressure set for FAC use. Thanks for watching.

Remember, once it becomes FAC it has to stay Section 1 and can never go back to being sub12. Even if you drop the power sub12, it has to stay on an FAC slot.

I made it, ill make a couple more and post them to Ebay in the next couple of weeks so keep an eye out. Thanks for watching.

@@sub12airgunners Hi mate. Did you end up listing them on ebay at all?

some don't mate i think the early 300mm 177 have the weight but most of the others don't 👍

@@sub12airgunners cheers That valve cap on mine is not budging- any tips?

Hi, thanks for watching.