Keep up the great work bro…I’ve learn a lot watching this video..Respect 👏🏽👍🏽
@INFINITIBROTHERS3 жыл бұрын
I appreciate it brother 🙌🙏🤙 thanks for watching! Glad it helped out with a few things!
@shootergamer03212 жыл бұрын
Excellent video! Wish there were videos like this for everything on our cars.
@INFINITIBROTHERS2 жыл бұрын
I try to put everything on my page🙏🙌🤙
@jm3614 жыл бұрын
The reason why you install the torque converter on/in the trans (not onto the motor 1st) is so that way it clicks/locks in (on the trans-input shaft) so that way the front pump on the trans DOESNT burn up which can kill the clutch packs inside the trans.. Also make sure your fluids are full in the converter.. Either way best of luck! Your ride is pretty dope!Stay safe!
@INFINITIBROTHERS4 жыл бұрын
Yes I had to learn this the hard way 😞 it has to click three times before setting all the way in. I appreciate in my man! lots of trial and error with This one BUT it was all worth it 🤙
@James-wg8mn3 жыл бұрын
Great content! I feel like we miss the gold when you have to put down the camera to focus on the work. Maybe a tripod to show as you work on those solenoid swaps or similar progress work? Keep up the great progress!
@INFINITIBROTHERS3 жыл бұрын
Thank you🙏 working on that!I tried 😅🤷🤙
@johnseallende26654 жыл бұрын
Dedication!!! 👏🏾
@INFINITIBROTHERS4 жыл бұрын
🤙😎🙏
@helteeb88783 жыл бұрын
@@INFINITIBROTHERS where did you purchase yur vr automatic transmission ?...q50 or q60 redsport...wats the difference...the q50 and q60 nonredsport...wats the difference wen looking for that transmission?
@INFINITIBROTHERS3 жыл бұрын
@@helteeb8878 they are the same transmission as long as its a turbo. I buy my engine and transmissions on lkq ebay
@helteeb88783 жыл бұрын
@@INFINITIBROTHERS ok...I checked lqk ebay..no vr transmission...also maybe you purchased yur vr30 transmission on ebay...saw a bunch for sale ..they cost over 600 ..800.or over a thousand..depends on mileage..and greedy sellers...the pickmyour parts here in California ..have high mileage cars..those late model infinitis ..you only find them at private salvage yards and will pay more..any advice..
@helteeb88783 жыл бұрын
@@INFINITIBROTHERS those q50 non turbo have the same vr transmission on the qr60 redsport??... ..the q 50 and 60 have the same beefy torque coverter??I looking for a vr automatic like yurs so I can swapp the weak lagging 7at on my infiniti m37 for more power
@Hondacbr600rrish10 ай бұрын
Nice bro ❤ I was wondering if you got a trans cooler and the placement for the cooler up front. Thanks.
@acostamobilemechanic7425 Жыл бұрын
🔥🔥🔥🔥
@EyeFullBlooD5 ай бұрын
I'm also looking to do this myself and have basically everything besides the Trans and Trans cooler and i have a few questions. 1.) Was your G37 RWD or AWD? ~ Mine is a 370GT Sedan ( G37 ) and is RWD 2.) Did you have to make any adjustments to differential flange 3.) How is it holding up to this day? Most guides that came before this video, Reddit/GodZilla Raceworks write up advise that a spacer is needed, This spacer sits between the rear driveshaft and transfer case output flange. GodZilla Raceworks and SoHo Motorsports both sell this spacer. However from what i gathered, because were using the One Piece driveshaft from from the coupe ( Driveshaft shop ) , that it fits perfectly without the needed hassle for space as the coupes driveshaft is shorter than the sedan, you able to confirm?
@johnfix0711 Жыл бұрын
My 2015 VQ transmission in my Q50 is throwing a code that says 1st gear wrong ratio and it literally drops out of gear at red lights and won’t go anywhere after I drive it for about 30min… I’m looking to get a new transmission for it but I need to find someone who knows about it and I wanna Put a VR transmission in cuz I’ve heard it is stronger sooo what should I do
@nv16852 жыл бұрын
You Probably answered this somewhere. As intrigued and excited, I'd like to swap my 2011 G AWD 7AT the same way. The shaft and trans bracket are my biggest concern. I watched your videos (prior too), learned that the TCM and solenoids will not function from the donor trans. As to using the '11s very own solenoid to compensate for that issue. What other complications will I be facing w/AWD VR trans swap.
@INFINITIBROTHERS2 жыл бұрын
Hello thanks for reaching out and yes I do answer this question a lot however I don't have an all-wheel drive. The process is still the same you will need a shorter drive shaft which is the one that I tell people to get. For the transfer case there will be a little bit of a gap but you can fix that with spacer. You are able to use the solenoids from both transmissions. The reason why mine didn't work is because it was faulty. So you are good to go same process. Bracket and braces the same process 🤙
@RomeloRoman4 жыл бұрын
Hey I'm about to do this swap right now, I need a lil help I hope you don't mind me coming back and forth with questions, but do I need to get a VRdrive shaft?? Or just a single peice and get it shortened?
@INFINITIBROTHERS4 жыл бұрын
I am back on social media message me on my new Instagram account @theinfinitibrothers
@K3.725 күн бұрын
What’s the torque specs for putting it back together?
@enrikrodriguez93242 ай бұрын
I am doing a transmission replacement on a 2012 automatic g37x.. new transmission is ready to go in, I just don't understand how i would end up bolting back the torque converter..
@user-qu6rp8bk6v Жыл бұрын
Also how many kms did the new transmission have on it
@K3.724 күн бұрын
Do I have to get another flex plate if so what kind?
@TheTyGuy03093 жыл бұрын
What did you do about the driveshaft? The VR trans is 3/4 inch longer than the VHR
@INFINITIBROTHERS3 жыл бұрын
a one piece drive shaft it is shorter than stock.
@timothymiguel78594 жыл бұрын
Any updates on this build? I'm considering doing this to my RWD G37 Sedan. Curious about driveshaft, fitment, etc...
@INFINITIBROTHERS4 жыл бұрын
Hey what's up man sorry for the late response the car is driving better than ever! Everything is holding up and the car is running strong!
@gogatbilisigeorgia3 жыл бұрын
@@INFINITIBROTHERS is this a RE7R01B 7 speedtransmission?
@VanMan89 Жыл бұрын
Hey bro sorry one more question lol. I know the drain/refill procedure but have never filled from empty. Did you just put all 10 liters in before you put it in the car?
@INFINITIBROTHERS Жыл бұрын
You want to put as much as you can before you start it after you start it you keep filling it up until it comes out of the fill leveling hole while the car is on at operating temperature
@blakea.durgin5949 Жыл бұрын
so i was actually doing a little bit of research right, and they were saying if you drop the back of the diff (back two bolts where the two bushings are) you can get the drive shaft to fit with no shortening. let me know your insight. in the middle of collecting parts now
@INFINITIBROTHERS Жыл бұрын
Yes that is another option that I just discovered! But I still recommend a one-piece driveshaft. But if you're on a budget yes that is another solution 🤙
@blakea.durgin5949 Жыл бұрын
@@INFINITIBROTHERS im collecting parts and pieces for boost but right now im just fbo/tune. so one piece will eventually come after i boost.
@blakea.durgin5949 Жыл бұрын
@@INFINITIBROTHERS where the shaft goes into the rear of the trans there is like a .75 gap.lol i had to get under it to confirm
@6mtG Жыл бұрын
What more parts do you need other then another driveshaft? Trans went out and want to go this route just wanna find the price for everything thanks
@lilfire9 Жыл бұрын
Yea what drive shaft can be used. Can we get some links. Just found a q50 trans I’m thinking about doing this.
@tylerlarson3732 ай бұрын
I am about to do the vr swap this weekend and I have seen multiple back and forths all around about which solenoids to use. Yes I do know vq TCM on vr valve body. However I've seen everything from use vq solenoids to it doesn't matter which ones you decide to use. Anyone have input on this?
@clarencewilliams41434 жыл бұрын
Also I looking to go turbo though
@LegitMcMusic10 ай бұрын
I’m looking to do this on my 15 q50 AWD, is that possible? And what would be needed / how much labour hours would a shop probably charge, thanks for your input.
@INFINITIBROTHERS10 ай бұрын
You can use all your stock parts. All you need to do is change your t c m. I'm not sure how much a shop would charge.
@Warsoul37 Жыл бұрын
Hey man, I have a 2015 q50 and my Valve Body went out. Would I have to replace it with one from the same year or can I use the valve body from a g37, 370z, and any other car with the same trans on my trans? I’m hearing you can do it and no you can’t because the car won’t recognize the Tcm from a g37.
@INFINITIBROTHERS Жыл бұрын
It should work
@ortizjonathano3 жыл бұрын
Quick question does the flex plate from the q60/q50 work on the g37 sedan
@INFINITIBROTHERS3 жыл бұрын
I never got to that. I wanted to try but I ended up buying the fast intentions
@seekingsoflo Жыл бұрын
Where’d you order this transmission from might I ask? You’re right about it being very clean.
@INFINITIBROTHERS Жыл бұрын
eBay
@seekingsoflo Жыл бұрын
@@INFINITIBROTHERS nice that’s where I just got mine. Almost as clean as yours. Got it for $300
@INFINITIBROTHERS Жыл бұрын
I thought I got it for a good price! Paid $400 shipped from Florida to Vegas 😎🔥🤙
@VQTANK Жыл бұрын
Hey was wondering if I could use a driveshaft from a q50 or q60 on my g37x coupe?
@INFINITIBROTHERS Жыл бұрын
U can use original DS
@KevinRamirez-jd4pv3 жыл бұрын
Question, I want to do this to my manual 350z, its twin turbo boosted with 500 HP but I'm not sure if this transmission swap would work for it, do you know? Also what exactly do you think I would need for it to work since the stock 350z transmissions are either 5speed automatic or 6 speed manual like mine? Please help me out
@INFINITIBROTHERS3 жыл бұрын
I know that u can bolt it up to your engine. BUT since your car is a manual you might have to switch your wire and ecu to an auto. I'm not 100% sure. I've never tried. Iys not common to hear a manual to auto swap. 🤙
@hefnerdon74625 ай бұрын
I ended up swapping to the new BR solenoids …. So you are saying I wasn’t supposed to ? On my 2014 q50?
@VanMan892 жыл бұрын
Hey, I was wondering if you had the measurements for axle lengths. I'm doing the swap myself and taking the axles to a driveline shop to be modified.
@INFINITIBROTHERS2 жыл бұрын
The DS needs to be shortened by 1/2 and inch🤙🙏
@VanMan892 жыл бұрын
@@INFINITIBROTHERS thanks man. The rear has to be shortened 1/2", then the front increased by 1/2"?
@INFINITIBROTHERS2 жыл бұрын
@@VanMan89 no. Just the rear
@INFINITIBROTHERS2 жыл бұрын
@@VanMan89 either or
@winstonbeck48163 жыл бұрын
Do you know if I would have to swap the TCM from my '14 Q50? Just had a built trans bust, so I'm doing the VR30 swap. Just unsure whether I can keep the TCM
@INFINITIBROTHERS3 жыл бұрын
You need to keep the original TCM and solenoids in your old transmission and put it into VR valve body. DO NOT USE VR TCM AND SOLINOIDS
@1JuJuBanks3 ай бұрын
@@INFINITIBROTHERSdidnt u use the 2019 solenoid? Tho
@INFINITIBROTHERS3 ай бұрын
@@1JuJuBanks I did, but the fifth gear was a little funny. It would slip a little so I. Put back my old ones
@boosted99em134 жыл бұрын
Do you know the difference between the rs400 and the regular q60 trans.. I can get my hands on a regular q60 trans for cheap
@INFINITIBROTHERS4 жыл бұрын
They are both the same Transmissions. They are no different Q50 Q60 as long as it's a VR transmission 🤙
@INFINITIBROTHERS4 жыл бұрын
Jump on it!
@boosted99em134 жыл бұрын
Awesome thanks for the reply man
@htownpride83653 жыл бұрын
I wanna do this to my 2015 q50 3.7 the valve body just went out in it and I don’t want it happening again pls help
@INFINITIBROTHERS2 жыл бұрын
Hello so sorry about the late response have you figured this out for your car? You can reach out to me on Instagram @theinfinitibrothers
@Alexhernandez-xj7mp Жыл бұрын
Do you have to change the valve body when you get the vr transmission from the vq? Or can you keep the vr transmission with its stick valve body and slap it on ?
@INFINITIBROTHERS Жыл бұрын
You use everything on the VR transmission except for the TCM. TCM has to go into valve body of VR from your old transmission
@Alexhernandez-xj7mp Жыл бұрын
@@INFINITIBROTHERS oh ok cause I did the conversion and I still can shift pass 3rd gear. And my mechanic used the old valve body from the vq . And he said that’s most likely the problem. But I still have the vr valve body with its internals
@INFINITIBROTHERS Жыл бұрын
@@Alexhernandez-xj7mp I stated in the video that you have to use everything VR except for TCM. Used VQ TCM for VR transmission. So that means you have to use VR valve body with your old VQ TCM
@mr1989junior3 жыл бұрын
Hey bro do you have to Rubber Flex disc from the old drive shaft into the new one drive shaft with the transmission swap?
@INFINITIBROTHERS3 жыл бұрын
No. My 1 piece DS came with a replacement aluminum solid sandwich plate.
@mr1989junior3 жыл бұрын
@@INFINITIBROTHERS what kind of DS you have? Do the all 1 piece comes with a sandwich plate?
@INFINITIBROTHERS3 жыл бұрын
Driveshaft shop . They should
@115youngeen4 ай бұрын
will this work on my 2008 g35s?
@ManTimeDre4 жыл бұрын
My trans on my 2013 g37x just died at 93k so I’m about to do this myself. Any issues so far?
@INFINITIBROTHERS4 жыл бұрын
No issue so far the only thing that I can tell you besides what you see on my video is use the same solenoid and TCM from your old transmission. I used the one from the 2019 and my 6th hear was acting up. Switched back to my 2009 solinoids and 👌👌
@ManTimeDre4 жыл бұрын
Infiniti Brothers thanks bro I appreciate it. I’ll let you know how it goes 🤞🏾
@lostjester10 ай бұрын
what was the mileage and price on this transmission im trying to find on on ebay and they’re all around 1k
@INFINITIBROTHERS10 ай бұрын
At this time, I was getting them with under 20K miles at around 4 to $500.. Nowadays that's how much they cost probably more
@nismomike23593 жыл бұрын
Where do you get those aluminum trays that you lay your parts on?
@INFINITIBROTHERS3 жыл бұрын
O'Reilly or autozone🤙 they are a life saver!
@nismomike23593 жыл бұрын
@@INFINITIBROTHERS thanks man🤘🏽 they really are.
@donutman19134 ай бұрын
how come you changed out the valve body if the ones from the g tend to go bad?
@INFINITIBROTHERS4 ай бұрын
Because the valve body on the VR is upgraded
@officialaalexx2 ай бұрын
@@INFINITIBROTHERScould you confirm if you’re able to use the vr valve body instead of the one that comes in the vhr? I saw another video and the guy used the one that came with the vr one
@reedhoffman28894 жыл бұрын
How has the car been running the new trans? I'm hoping to do this swap soon.
@INFINITIBROTHERS4 жыл бұрын
I'm loving it man! Its a totally different. Car! Everything is holding up and running strong!
@kennyglentz91074 жыл бұрын
Alvin I’m going to do my swap here in the next couple weeks. Question. Those solenoids from the 2019 trans worked fine with your 2009 TCM? I’m swapping a 2017 with 12k miles and would love to use new-er solenoids. Thanks in advance
@INFINITIBROTHERS4 жыл бұрын
Do not use the solenoids from the new transmission. I repeat do not use them. I tested the current and Ohm's from the 2019 and the 2009s. They were different. That is the reason why my 6th gear was acting up and the readings were off the charts. Each shift said I was slipping like crazy. When I put the original solinoids(2009) it was back to normal.
@kennyglentz91074 жыл бұрын
Thank you a ton bro.! I appreciate what you’re doing with your G. Keep up the good work
@INFINITIBROTHERS4 жыл бұрын
Thanks man I appreciate you hit me up if you need any more help👐
@Charles-yp1bq2 жыл бұрын
Hey man, hope you will read this I'm thinking about doing such swap for my 370z in the future, and 1st question, do you know about any1 that did it already with 370z? And 2nd thing, as we have the bell housing of VR30, how about cutting flange from it and welding flange from VQ37 bellhousing? In order to have all mounting bolts and 100% support, or this is too crazy...? And also thank you for the videos
@INFINITIBROTHERS2 жыл бұрын
Hello thank you for watching my videos yes I know a couple of people who put it into their 370. And to answer your second question it's not necessary I've had the swap for quite some time now and I went under there recently to check bolts and they are still tight like I just put it on. But what you want to do is entirely up to you I don't see why not but if you ask my honest opinion I don't think you need to do it 🙏🤙
@Charles-yp1bq2 жыл бұрын
@@INFINITIBROTHERS awesome 🙂 So there is enough of place in 370z for bit bigger transmission, that's really good news As per your videos any year of transmission from VR30ddtt will work for this? As I've seen different part numbers and was bit confused which of them is actually right Thank you once again
@INFINITIBROTHERS2 жыл бұрын
@@Charles-yp1bq as long as you're 370 is 7AT you will definitely need a shorter drive shaft which is the one piece of aluminum
@Charles-yp1bq2 жыл бұрын
@@INFINITIBROTHERS will need to find some local shop for this As we don't have so many nice Z/G dedicated shops here in Europe
@INFINITIBROTHERS2 жыл бұрын
Oh you're in Europe! Cheers! As long as you can get a vehicle transmission in your hands with an aftermarket polyurethane mount and one piece shortened drive shaft. Everything is basically plug & Play!
@castillofloors728210 ай бұрын
Can a v30 transmission be swapped in for a 5/at transmission from 2008 Infiniti g35x
@INFINITIBROTHERS10 ай бұрын
No
@johnfix0711 Жыл бұрын
Bro how much is required to do a vr30 transmission on my 2015 VQ37 Q50???
@INFINITIBROTHERS Жыл бұрын
How much money?
@linfordmalcolm42952 жыл бұрын
Is their a way to tell the difference between the red sport 350 torque transmission from the 250 torque?
@INFINITIBROTHERS2 жыл бұрын
Yes the torque converter is going to be significantly bigger. The whole transmission is different. You need 3.0 twin turbo transmission it doesn't matter if it's red sport or silver sport
@linfordmalcolm4295 Жыл бұрын
@@INFINITIBROTHERS the silver sport transmission is only rated at 350hp and 250 torque while the red sport is rated at 400hp and 350 torque. So I believe it does matter what transmission you get. Am just trying to find out if there is visual way to tell the difference between the two. Part number, mark on transmission or anything like that.
@INFINITIBROTHERS Жыл бұрын
@@linfordmalcolm4295 they are the same transmission I know this because I took them both apart. They have the same amount of clutches and the same exact torque converter and the same exact valve body. I actually have a silver sport transmission and a red sport.
@christiancastro57463 жыл бұрын
What is the different in transmission??
@INFINITIBROTHERS3 жыл бұрын
Bigger torque converter upgraded valve body and 12 extra clutches
@Tsukiyo.98 Жыл бұрын
Did keeping the VR30 solenoids cause any issues?
@INFINITIBROTHERS Жыл бұрын
It was slipping on the 5th gear. I ended up using my VQ solenoids 🤙
@VanMan89 Жыл бұрын
Hey man, do you have the torque specs for the bellhousing bolts? I took mine off to get the original crank sensor hole welded up and new one precision drilled. I can't find the torque specs anywhere for bellhousing to trans case.
@INFINITIBROTHERS Жыл бұрын
I don't have a torque spec but I put a lot of torque on it with my torque wrench you just have to get a feeling for it to be honest.😬🙏🤙
@VanMan89 Жыл бұрын
@@INFINITIBROTHERS thank you, I'm about to do the same but I'm worried about the aluminum case lol.
@INFINITIBROTHERS Жыл бұрын
@@VanMan89 I think the same way but trust me I am a big guy and I put most of my weight on the torque wrench until I couldn't go anymore those are really big bolts. But I'm not saying put all your weight into it you can feel when it gets to that point. Make sure you do criss cross tightening and the transmission marries to the engine correctly the bolts will stop and you can tell when it's on there real tight. 🤙
@VanMan89 Жыл бұрын
@@INFINITIBROTHERS haha thanks man. Hoping to have the car off the jackstands next weekend.
@INFINITIBROTHERS Жыл бұрын
@@VanMan89 have fun my man if you have any other questions just hit me up!
@mitznu80854 жыл бұрын
Let's see some high speed videos LOL 😜
@INFINITIBROTHERS4 жыл бұрын
I'll show you something else high speed 😘😉
@mitznu80854 жыл бұрын
@@INFINITIBROTHERS LMAO longinisa ahh
@INFINITIBROTHERS4 жыл бұрын
@@mitznu8085 pshhhh no... How about Vienna sausage 👀 the yellow can
@mitznu80854 жыл бұрын
@@INFINITIBROTHERS lol.
@joshmesser11652 жыл бұрын
Does it have to be from a red sport or can it be from a silver sport or base 3.0tt? Whats the differences?
@INFINITIBROTHERS2 жыл бұрын
There is no difference as long as it's 3.0 twin turbo 🙏🤙
@joshmesser11652 жыл бұрын
@@INFINITIBROTHERS omg thank you man you have no idea. I was so worried i bought the wrong trans😂😰
@INFINITIBROTHERS2 жыл бұрын
@@joshmesser1165 😁🤙🙏🙌
@bumperlessg51714 жыл бұрын
Hey dudes I have a G35s and the Transsmission just went up on me , it’s has the 35hr but would I be able to put a 37vhr Transsmission on it , seeing as tho u guys just swapped the vr30 trans on the 37vhr
@INFINITIBROTHERS4 жыл бұрын
Honestly I think it's different but even if it did bolt up you would have to use your TCM and it will still only shift up to 5 gears. I think. There's only one way to find out! 😎🤙
@bumperlessg51714 жыл бұрын
Infiniti Brothers can’t you reprogram the TCM as well ?
@INFINITIBROTHERS4 жыл бұрын
Yes I hear that you can but I don't have any experience in that all I know is that my tune does not have anything to do with the TCM
@bumperlessg51714 жыл бұрын
Infiniti Brothers actually watching the video as we speak
@INFINITIBROTHERS4 жыл бұрын
I can learn something new today thanks to you my man
@Diyrepair1235 ай бұрын
I have a 2010 g37xs thinking about a vr30 swap. Will I need the transfer case and the driveshaft to swap over. My cars AWD
@urygen5 ай бұрын
Wondering the same. 2010 G37X sedan
@INFINITIBROTHERS5 ай бұрын
Everything will swap over
@INFINITIBROTHERS5 ай бұрын
Everything will swap over
@Diyrepair1235 ай бұрын
@@INFINITIBROTHERS do I need the vr30 transfer case and driftshaft, or the factory ones will work?
@INFINITIBROTHERS5 ай бұрын
@@Diyrepair123 You can use everything. Just make sure you swap out your t c m
@meidosonbol4 жыл бұрын
Hey bro, Can you post your fb name on here? I did my VR swap and I’m having some problems. I’m hoping you can answer some questions so I can try to figure it out. Would be highly appreciated!
@INFINITIBROTHERS4 жыл бұрын
Hey what's up man I'm sorry that you have to go thru that. email me and I'll shoot you my number. I don't have social media.
@jjgonzalez75943 жыл бұрын
How do you find what size driveshaft you need and where do you buy it?
@INFINITIBROTHERS3 жыл бұрын
You can purchase on Teambeefcakeracing.com 7at Coupe aluminum DS from DDS Cheapest I found. The DS is shorter than stock. U only need it 1/2 shorter to work. OR u can have a local shop cut your original DS. I highly recommend and 1 piece DS tho..
@jjgonzalez75943 жыл бұрын
Thank you for the great info and if I buy the DS from beefcakeracing does it come to size or does it still need to be cut?
@INFINITIBROTHERS3 жыл бұрын
@@jjgonzalez7594 it's shorter so won't need to cut. 🙌🙏🤙
@iptperformancetrans10 ай бұрын
Great video, would you guys be interested in a Collab?
@thegs21224 жыл бұрын
Bro I have a 2008 g37 coupe, will a 2015q60 3.7 motor will work?
@INFINITIBROTHERS4 жыл бұрын
Honestly I'm not sure. Only way to find out is to change your ECU to newer G37 and use real G37 TCM 🤙🤷
@thegs21224 жыл бұрын
Infiniti Brothers or maybe a 2012-2014 motor
@thegs21224 жыл бұрын
I mean it’s the same 3.7 motor
@Venom-ct8yy2 жыл бұрын
What is the exact name of the sensor that is down there? I want to replace it when I do the swap just to be safe.
@INFINITIBROTHERS2 жыл бұрын
Crankshaft position sensor
@Venom-ct8yy2 жыл бұрын
@@INFINITIBROTHERS and should I replace the camshaft sensor as well?
@INFINITIBROTHERS2 жыл бұрын
@@Venom-ct8yy no . Not unless u are getting a code
@Venom-ct8yy2 жыл бұрын
@@INFINITIBROTHERS appreciate it, still waiting on the coupe driveshaft from beefcake racing , then I will be able to install and get tuned by martin.
@INFINITIBROTHERS2 жыл бұрын
@@Venom-ct8yy 🔥🔥🔥👌🙌🤙🙏
@daviddaniel57703 жыл бұрын
how can u tell the year and if u have a redsport transmission on the side plate ?
@INFINITIBROTHERS3 жыл бұрын
Silver sport red sport are the same. As long as its a 3.0t they are exact the same. Mine came off a Red sport. I checked the carfax from the vin.
@Venom-ct8yy2 жыл бұрын
@@INFINITIBROTHERS where can I find the vin on the transmission to look up the year without taking out the valve body?
@INFINITIBROTHERS2 жыл бұрын
@@Venom-ct8yy there should be an imprint underneath or at the back. I forget. But to confirm it can see that date on the solenoid when you exchange tcm
@Venom-ct8yy2 жыл бұрын
@@INFINITIBROTHERS I was going to have the shop I bought the transmission from do the swap, I didn’t want to take off the valve body to check the year, they said it was off a 2021 with only 6k miles, I wanted to make sure it was what they said it was.
@Venom-ct8yy2 жыл бұрын
@@INFINITIBROTHERS I’m pretty sure I got a 2018 transmission instead 😓
@Jay-le7gh3 жыл бұрын
hey bro, i have a 2014 3.7 q50, can you tell me what’s everything ima need for this swap? from the flex plate to the driveshaft and all of that please? and would this be a good swap before adding bolt ons, (test pipes, custom exhaust, etc?) and will i need a tune after or will the car run fine after the swap?
@James-wg8mn3 жыл бұрын
watch the videos foo
@Jay-le7gh3 жыл бұрын
@@James-wg8mn nah foo
@seanbenson44818 ай бұрын
where did you source your transmission?
@INFINITIBROTHERS8 ай бұрын
Ebay
@James-wg8mn3 жыл бұрын
Could the swap be done in one day?
@INFINITIBROTHERS3 жыл бұрын
Yes🤙
@josecharfauros1116 Жыл бұрын
What’s the deal for the trans🫠
@georgegutierrez68762 жыл бұрын
Where did you order your vr from??
@INFINITIBROTHERS2 жыл бұрын
eBay mah man🤙
@RubberChickenMan0074 жыл бұрын
What happens if you don't swap out the valve body from the Q and try running it as it is?
@INFINITIBROTHERS4 жыл бұрын
It won't shift
@RubberChickenMan0074 жыл бұрын
@@INFINITIBROTHERS oh damn haha. That's kind of important 😂
@RubberChickenMan0073 жыл бұрын
When you did this swap, what driveshaft did you buy?
@INFINITIBROTHERS3 жыл бұрын
Months ago now. DSS
@RubberChickenMan0073 жыл бұрын
@@INFINITIBROTHERS do remember the part number? I just want to make sure I get the correct length.
@rexwhite412011 ай бұрын
Why did yuh cut out bell hoisin?
@INFINITIBROTHERS11 ай бұрын
Because the crank position sensor is located in a different spot on the VR
@brycehervey38715 ай бұрын
Boom 😂
@coleharrison37352 жыл бұрын
how much would you charge to do this swap?
@INFINITIBROTHERS2 жыл бұрын
I'm sorry unfortunately I don't work on anyone's cars.. 🙏🤙 I'll guide you through it though
@coleharrison37352 жыл бұрын
@@INFINITIBROTHERS thanks brother. your video is already a life saver. my shop was about to do it for me and then they burned down and have shut down. and can’t find anyone else willing to try to do it sadly. once i get free time i’m going to try to tackle it myself thanks to you!
@INFINITIBROTHERS2 жыл бұрын
I will guide you through it! You can hit me up on Instagram if you like 🤙🙏
@geeteedan4 жыл бұрын
this is for a rwd trans and not awd correct?
@INFINITIBROTHERS4 жыл бұрын
You can do the same thing with the all-wheel drive model from the VR engine. Same process
@geeteedan4 жыл бұрын
@@INFINITIBROTHERS I've actually looked into this a good deal since watching your video. I have a 15 Q50 AWD with the Vq and very interested in the swap. I have cross referenced the drive shaft and for my 15 Vq and the 16+ Vr trans, the awd have the same part number. I believe i can just order the new trans support and it'll bolt right up. Only issue I see is that the front drive shaft has different part numbers for the 15 and 16+ so thats where I'm stuck at currently.
@verefiedxL2 жыл бұрын
@@geeteedan did you wind up finding out what difference there is with the front drive shaft?
@geeteedan2 жыл бұрын
@@verefiedxL it's the same. The 14 and 15 awd trans has a larger case extention on the transmission. The 16+ vr trans is overall longer but the case extention is shorter so it's the same distance from the transfer case and the front axle. Can reuse that so just need the 16+ awd trans and then the spacer for the rear driveshaft.
@DennyBalance Жыл бұрын
@@geeteedan thank you
@user-qu6rp8bk6v Жыл бұрын
What was the total cost of this bro?
@INFINITIBROTHERS Жыл бұрын
At this time it cost me just under 1k my VR transmission had under 20k miles 🤙🙏
@clarencewilliams41434 жыл бұрын
Yoooooo bro can you do some work on mine
@INFINITIBROTHERS4 жыл бұрын
Yea Man 👐 what you need tho? Depends. M limited on space RN
@clarencewilliams41434 жыл бұрын
Like that trans swap and doing my turbo set up. I heard that a 5speed auto trans was strong too
@modiddly16636 ай бұрын
Cost to drop my g off to you 🤣😂🤣
@xxsupreme_01xx375 ай бұрын
no impacked. u were
@real_ultrajoe Жыл бұрын
What the hell is that
@xxsupreme_01xx375 ай бұрын
rere
@ricardosantiago7024 жыл бұрын
Automatic 😂😂
@INFINITIBROTHERS4 жыл бұрын
What is so funny in my man? LOL
@nozahyoublockqork2690 Жыл бұрын
Hey do you think i can private message you on facebook ? i have a few questions thanks
@INFINITIBROTHERS Жыл бұрын
You can reach me at Instagram @theinfinitibrothers🤙🙏