Why the Nissan VQ V6 Engine is Still Being Sought After, 20 Years Later

  Рет қаралды 683,339

speedkar99

speedkar99

Күн бұрын

The Nissan VQ series of V6 engines, which originally dates back to 1994 to replace the VG series of V6 engines, has been a stronghold in Nissan and Infiniti's offerings over the past two decades. Its most popular version is the VQ35DE, which were fitted many vehicles in the early 2000's including the Nissan Altima, Maxima, Murano, Pathfinder and Quest; and the Infiniti G35, M35 and FX35, and is still used in production vehicles today.
In this video we take an indepth look at a VQ35DE sample from a 2006 Nissan Murano, tear it down to see what's inside and how it works. We will also look at what makes this engine such a strong contender for Nissan, being fairly reliable and versatile across its product lineup. Additionally, we look at why these engines do fail, and examine common failure modes discovered over the years.
Nissan has definitely created an award winning engine that was way ahead of its time almost 20 years ago when it debuted. Sadly, V6 engines in its lineup are slowly being replaced by turbo 4 cylinders, but the VQ series will still be sought after for years to come.
Skip to section in the video:
0:00 Introduction
0:18 Engine Overview
1:37 Top Teardown
2:51 Bottom Teardown
5:46 Timing Teardown
11:07 Cylinder Head Teardown
13:59 Block Teardown
16:29 Component Analysis
20:39 Engine Improvements
21:45 Final Thoughts
Keep your VQ engine well maintained with parts you can find here!
Genuine Oil Filter:
amzn.to/3fgm6e5 (US)
amzn.to/38MuSyZ (Canada)
High mileage Engine Oil:
amzn.to/35ATfhi (US)
amzn.to/32RDoZI (Canada)
Engine Coolant:
amzn.to/3kz77N1 (US)
amzn.to/3nusFwl (Canada)
Timing Chain kit:
amzn.to/35CVTmJ (US)
amzn.to/38MvrsB (Canada)
Related links to check out:
How an Engine Works (VQ35DE)
• How an Engine Works
How Variable Valve Timing Works:
• How Variable Valve Tim...
Why Car Engines Burn Oil:
• Why do Cars Burn Oil?
Why Engine Lubrication Is So Important:
• Why ENGINE OIL is so I...
How the Engine Lubrication System Works:
• How the Engine Lubrica...
How a Car's Cooling System Works:
• Why Engine Cooling Is ...
This is the Camera I use:
amzn.to/2Y24ixX (US)
amzn.to/2Yhb3eo (Canada)
Link to Etsy shop where you can purchase speedkar99's brother's socks, t-shirts or hoodies:
www.etsy.com/ca/shop/Speedkar
Check out the speedkar99 Facebook page:
/ speedkar9
Check out the speedkar99 Linkedin page:
/ speedkar99
Follow speedkar9 on Instagram for behind the scenes coverage:
/ speedkar9
Subscribe for more videos just like this:
kzfaq.info_...

Пікірлер: 1 500
@speedkar99
@speedkar99 3 жыл бұрын
My apologies for the background noise in this video. I live ~1km from the runway of Canada's largest airport.
@rondhole
@rondhole 3 жыл бұрын
It's really surprising how stupid newer VQ35 engines. I believe older VQ water pump was outside the timing cover. At least before Renault destroyed Renault reputations
@ardyjuniorcars9020
@ardyjuniorcars9020 3 жыл бұрын
How I wish to visit you someday
@JoeUrbanYYC
@JoeUrbanYYC 3 жыл бұрын
@@rondhole 1995-1999 VQ on the Maxima was inside the timing cover. Not sure about the VG series.
@gaveintothedarkness
@gaveintothedarkness 3 жыл бұрын
Pearson airport? Fellow Torontonian?
@speedkar99
@speedkar99 3 жыл бұрын
Yeah !
@spideym35i
@spideym35i Жыл бұрын
I’m an Infiniti tech. I can confirm the only time I’ve seen a VQ fail was from lack of maintenance. They are insanely strong engines.
@speedkar99
@speedkar99 Жыл бұрын
Yep they are strong but when they burn oil and people run them low, they blow
@kjk4795
@kjk4795 7 ай бұрын
Do the new maximas also have a VQ V6 ?
@spideym35i
@spideym35i 7 ай бұрын
@@kjk4795 yes they do
@kjk4795
@kjk4795 7 ай бұрын
@@spideym35i nice, is it the VQ35DE ?
@spideym35i
@spideym35i 7 ай бұрын
Sure is!!
@nickvang9097
@nickvang9097 3 жыл бұрын
This man literally took the whole engine apart in a day for our entertainment. You sir, have earned my sub and like!
@speedkar99
@speedkar99 3 жыл бұрын
That's how I am. It's one thing to talk about it, but when you see it, awesome!
@Decimusblack88
@Decimusblack88 3 жыл бұрын
@@speedkar99 for real , can you make one putting it together
@cambodianboost3945
@cambodianboost3945 3 жыл бұрын
Looks to me he took only a half hour or so to completely disassemble this engine
@sunnice2
@sunnice2 2 жыл бұрын
Agreed this has helped me out sooo much
@tragedyfactorymusic
@tragedyfactorymusic 2 жыл бұрын
And he Promotes Dental Hygene..You da man!
@bradleyewoodworth
@bradleyewoodworth 3 жыл бұрын
No music, graphics or any other unnecessary BS. Extremely informative and well done! You should give lessons on how it's done. Bravo!
@mechtechau
@mechtechau 3 жыл бұрын
Completely agree except for the wrong head removal bolt sequence and using a pry bar to remove stuck components from the block. This guys a good backyarder and I appreciate the time he's taken but he may need some finesse if he ever builds something to last.
@bradleyewoodworth
@bradleyewoodworth 3 жыл бұрын
@@mechtechau I think he’s just doing it like that for the sake of time and because these are trashed motors for the most part.
@domingodeejayable
@domingodeejayable 3 жыл бұрын
i couldn't agree more.
@OOICU812
@OOICU812 3 жыл бұрын
@@bradleyewoodworth agreed.
@chrish8487
@chrish8487 2 жыл бұрын
Agreed. No fluff or BS just straightforward information.
@ky0611
@ky0611 3 жыл бұрын
I can't believe no one commented on how important the tooth brush's job was in this video lol
@speedkar99
@speedkar99 3 жыл бұрын
The teach-brush
@a.a7648
@a.a7648 3 жыл бұрын
Its his brother's one
@esphilee
@esphilee 3 жыл бұрын
@@a.a7648 ,this one is the wife’s.
@hydrocarbon8272
@hydrocarbon8272 3 жыл бұрын
@@esphilee Maybe they're the same! lol
@esphilee
@esphilee 3 жыл бұрын
@@hydrocarbon8272 , color is different. Not the same brush.
@renzobelmonte4761
@renzobelmonte4761 3 жыл бұрын
I like the various amounts of your family’s items are used in this video
@speedkar99
@speedkar99 3 жыл бұрын
I like being resourceful
@pospc2
@pospc2 3 жыл бұрын
Reduce,reuse recycle. I like using my family's old clothes as rags as well,that and wore out bath towels.
@JoseMartinez-cc4rz
@JoseMartinez-cc4rz 3 жыл бұрын
@@speedkar99 That Nike shirt looked wearable.😒😒😒😒
@badass6.0powerstroke10
@badass6.0powerstroke10 3 жыл бұрын
He uses his family's clothing in many of his videos, i just watched his CVT Transmission video other day, was using many of his family's clothes. Great videos by the way.
@gtlegacy8
@gtlegacy8 3 жыл бұрын
It’s not leaking oil it part of the design feature to help prevent the undercarriage from rusting 🤣
@speedkar99
@speedkar99 3 жыл бұрын
Well if it helps sure...these do have an aluminum block so there isn't much to protect
@pittypatterputzzler5311
@pittypatterputzzler5311 3 жыл бұрын
Lol.
@jman5106
@jman5106 3 жыл бұрын
@@speedkar99 he’s joking lol
@thegearknob7161
@thegearknob7161 3 жыл бұрын
This is part of the reason why the Front subframe on old Minis last a lot better than the rear ones do.
@wannabeetiger
@wannabeetiger 2 жыл бұрын
Good one! 🤣🤣🤣
@gradywilson3006
@gradywilson3006 3 жыл бұрын
I have owned a 02 Altima SE with the VQ35 since new and it has proven to be one of the most reliable cars I have ever owned. The car now has 240k on the clock and it still runs like a champ with great power available. Synthetic oil since new and regular maintenance have rewarded me with great reliability.
@davekvisler7409
@davekvisler7409 Жыл бұрын
Synthetic oil. Keep the oil level topped off and change every 5,000 miles. Along with regular maintenance to prevent overheating and these engines will last 200,000 miles plus. I just replaced an alternator on a 2002 Maxima, with 196,000 miles on the engine.
@dimakhidarkovskiy2175
@dimakhidarkovskiy2175 9 ай бұрын
@@davekvisler7409ain tha bitchh to replace the alternator, the AC compressor is on the way , very little room and lots of sweat, at least for me
@BigHeadClan
@BigHeadClan 6 ай бұрын
Ditto my 02 Altima hit 195k before she was written off in an accident, now drive a g37 and she’s at similar mileage. The Altima wasn’t entirely problem free it had a slight oil leak from the o ring behind the oil filter but that was about it.
@BruceLee-xn3nn
@BruceLee-xn3nn 5 ай бұрын
I just changed water pump on my step sons Altima. That shit sucks
@NikPappaconstantine
@NikPappaconstantine 2 жыл бұрын
I’ve oddly become addicted to watching engine tear down videos on KZfaq and I’ve got to say your channel is my absolute favorite. I really enjoy how you explain engine design and the benefits and drawbacks of a specific approach - I learn far more information from your videos. I can’t wait to see more!
@speedkar99
@speedkar99 2 жыл бұрын
Glad you enjoy them. I got a Toyota V6 engine coming next
@dann4561
@dann4561 3 жыл бұрын
Nissan V6s are Legendary. Everything from Maximas, Muranos, & Infiniti CUVs, to Zs, GT-Rs, & Infiniti Sedans/Coupes all use them. ^_^
@1PITIFULDUDE
@1PITIFULDUDE 3 жыл бұрын
My Frontier VQ40 hauls Axx and sound sweet, even with stock exhaust. Unfortunately, the truck weighs 4.5k lbs.
@liblib89
@liblib89 3 жыл бұрын
@@1PITIFULDUDE to be expected, it has a body on frame design
@RahBenjiii
@RahBenjiii 3 жыл бұрын
Dont forget the altima 😉
@ultraguy8771
@ultraguy8771 3 жыл бұрын
Many Renaults also had them in Europe.
@Lofi.z34
@Lofi.z34 3 жыл бұрын
You're talking about the VQ35DE & HR, and the VQ37VHR The VR30DDTT and VR38DETT for their twin turbos And for V8 the VK56VD which is a great engine, even used in FD
@08VaNupe
@08VaNupe 3 жыл бұрын
I’ve had a VQ30DE, VQ35DE FWD & RWD, VQ35HR Hybrid configuration and now VQ37VHR and all have been very reliable, never burned oil but 1 leaked at 200k due to valve covers. My highest mile one lasted 300k miles (VQ30DE) with regular maintenance and my moms VQ35DE also lasted 300k miles with regular maintenance. Long love the VQ
@OliverKoolO
@OliverKoolO 2 жыл бұрын
I agree the vq30 with 245k miles in my 2000 maxima is the best. Valves covers are bad still running tho
@ctknetwork3008
@ctknetwork3008 2 жыл бұрын
yep have a vhr myself in my 370z i’m building it
@winstonwolfwhiteshoes
@winstonwolfwhiteshoes 10 ай бұрын
What did you do about the valve cover leak? I fixed it once but its leaking again...
@08VaNupe
@08VaNupe 10 ай бұрын
@nofacewhiteshoes9209 I hd the valve covers replace and mine never leaked again sorry bro
@GurpreetHira
@GurpreetHira 3 жыл бұрын
My first Nissan product is a Infiniti m37....the best part of the car is the VQ37VHR! That exhaust note leaving a red light makes me smile each time...best sounding V6!
@luisamoa2500
@luisamoa2500 3 жыл бұрын
If you like that then you'll love the VR6 sound. Sounds like a baby GTR
@speedkar99
@speedkar99 3 жыл бұрын
Awesome VQ exhaust notes...I should have mentioned that in my video
@Mickey_Bauer
@Mickey_Bauer 3 жыл бұрын
@@luisamoa2500 I agree, VR6 is probably one of the best sounding engines, after V10, thanks to its unique single head design and uneven length intake and exhaust runners. I love my VQ too but VR6 is special when it comes to sound 🙂
@hauptwerk1
@hauptwerk1 3 жыл бұрын
Nope, it mows like a cow I have the vq35de and have owned an 3.0v6 Alfa Romeo Busso and that one made the best sound! And looks also a tenfold better by the way...
@RENEMARINE
@RENEMARINE 3 жыл бұрын
Everyone in your family is wondering where their clothes are😂😂😂
@sailingblacklotus
@sailingblacklotus 3 жыл бұрын
I got the vq40 variant. 300k still running strong.
@speedkar99
@speedkar99 3 жыл бұрын
Nice.
@thenostalgicgamer2093
@thenostalgicgamer2093 3 жыл бұрын
Vq37vhr is my favorite I got a brand new one dropped in my q40
@anuar.m.y
@anuar.m.y 3 жыл бұрын
vq40 in my frontier! i thought it was the same as the vq35 but bored out to 4.0 L?
@thenostalgicgamer2093
@thenostalgicgamer2093 3 жыл бұрын
@@anuar.m.y those things sound amazing
@elonsus9747
@elonsus9747 3 жыл бұрын
@@anuar.m.y basically yes.
@ZynovFTW
@ZynovFTW 3 жыл бұрын
I love my VQ37VHR in my '12 G37 Sedan ❤ such a reliable engine
@dxta7360
@dxta7360 3 жыл бұрын
@@abrame8750 I have a vk45de in my car too. But can you suggest how I can make that engine in my car to sound like a sport's car? I mean the exhaust system I want it sounding sporty.
@dandc2011
@dandc2011 3 жыл бұрын
@@dxta7360 Do you drive an M45 or FX45? If so Megan racing makes a pretty nice cat-back system. If you want really loud then delete the secondary cats and just straight pipe it out to a flowmaster tip.
@videomaniac108
@videomaniac108 3 жыл бұрын
@@dxta7360 You might check out some sound clips from cat back systems with an H pipe crossover.
@premiereautoengineering9830
@premiereautoengineering9830 3 жыл бұрын
I am running this channel in the midst of many difficulties. Thank you so much for helping me and sending me forward, comrades🙏🙏
@Pokemonguy16RS
@Pokemonguy16RS 3 жыл бұрын
Can agree these v6 VQ35 engines are bulletproof, owned since high school, and still runs to this day (Yes with 1-2 repairs/YR throughout the years). Even Scotty Kilmer says these engines are bulletproof.
@keegan8517
@keegan8517 3 жыл бұрын
Now I know specifically where my Z is leaking, thanks 😅
@chrismiller2053
@chrismiller2053 3 жыл бұрын
I enjoy the level of detail in all of your videos. You have answered so many of my questions along the way. So glad I subscribed several months ago. Thanks!
@janinelv
@janinelv 3 жыл бұрын
I just came across your videos yesterday and I’m hooked! Simple and straightforward I’m able to learn a lot without tearing it down myself! Awesome job! Thanks
@2k2albatross22
@2k2albatross22 3 жыл бұрын
Speedkar99, This is a great overview. I have had to change the valve cover once on my 2002 Maxima to resolve one of the oil issues that you have pointed out. As you pointed out I also had the oil leaking into the spark plug socket but that was resolved after the valve cover was replaced. After 16 years of ownership the car is still solid and feels like new. My car is a manual and it really is still a joy to drive.
@aomz6878
@aomz6878 3 жыл бұрын
Amazing video. I own a 350z which i turbocharged myself in a garage box. It was my first real experience with the engine itself and i learned so much out of it. This video helped me alot to understand visually most of the things ive worked on the past months under my car and it gave me confidence and enthusiasm for the vq which i adore. My next goal for the coming time is to reinforce and rebuild the engine in my z, which was very loyal to me for over 5 years now. These engines are just amazing in my opinion.
@CORZER0
@CORZER0 3 жыл бұрын
Crazy informative in only 20 min! Once again, you rock!
@spacecloud-0
@spacecloud-0 9 ай бұрын
man the knowledge, pacing, and recording was just amazing. I can't give this video enough praise. Thank you!
@cashkidd19
@cashkidd19 3 жыл бұрын
Great video I’ve owned Nissan’s all my life with this motor and alway wanted to see a break down of it. Thanks.
@tarekmmhamza6609
@tarekmmhamza6609 3 жыл бұрын
Good sir! If I were to take a class about auto engines and others, you’d be the first on my list as a professional instructor.
@OOICU812
@OOICU812 3 жыл бұрын
One of the best classrooms on KZfaq. Keep em coming!
@izwanshaari9854
@izwanshaari9854 2 жыл бұрын
I absolutely love the engine teardown and mechanical review videos. I'm subscribing. Keep it up👍🏻👍🏻👍🏻
@mattf0509
@mattf0509 3 жыл бұрын
I work on cars all day everyday, this video was great! I watched the entire thing. It was very informative and very well articulated. Thank you for taking the time to post this.
@speedkar99
@speedkar99 3 жыл бұрын
You are welcome
@Bulldogges
@Bulldogges 3 жыл бұрын
Packed with comprehensive engine information and conveyed by someone who REALLY knows these engines. The edits are excellent and there is no showmanship or extraneous commentary. This production should be the model for every video on KZfaq. I look forward to watching more of speedkar99's other presentations. Well Done!
@speedkar99
@speedkar99 3 жыл бұрын
Thanks! I have a few more engine teardown videos to post
@ShawnTheRazor
@ShawnTheRazor 2 жыл бұрын
Amazing how you explain these engines man. I have learned more about car engines in the past two videos than I have all my life.
@weloveups831
@weloveups831 3 жыл бұрын
I love your in depth videos. This video answered so many of my 2011 murano questions. I have very slight water seepage externally on both heads. Now I know I don't want to change my head gaskets. I have 113000 miles and routinely change my trans filter. I will run it until it blows.
@andrewstewart9589
@andrewstewart9589 3 жыл бұрын
Wow, that was an impressive breakdown and explanation. I'm digging into a timing chain job on my VQ40DE and this was extremely helpful.
@chuckschillingvideos
@chuckschillingvideos 3 жыл бұрын
I had a 2004 Infiniti G35 6MT with the VQ35DE motor. I put 169K HARD miles on that car and the only issue I ever had with it was the camshaft position sensor failed. It's an easy repair (if you can reach it) that doesn't cost much to do. Never burned a drop of oil. That was perhaps the last generation of decent Nissans.
@robtg5665
@robtg5665 3 жыл бұрын
My first video of this sub. Really like the no "BS" straight up knowledge dumps. Gonna share this sub. So our main man can get a garage or some kind of shelter. And also keep the man in good used tooth brushes. Keep up the great work!
@ronaldobrien211
@ronaldobrien211 Жыл бұрын
Simple words no fancy gimmicks and a fantastic informative video! wish there were more like you.
@mirceacartas6489
@mirceacartas6489 3 жыл бұрын
Thank you for the effort you put in these videos, keep up with this great work
@speedkar99
@speedkar99 3 жыл бұрын
Thanks. It sure does take alot to put these together but it's all for the learning
@burwood69
@burwood69 3 жыл бұрын
I've owned a VQ30 and now own a VQ40, 25 years difference and they still make this motor. Oil burning wasnt too common on the 35's but it definitely relied on maintenance from the owner.
@speedkar99
@speedkar99 3 жыл бұрын
Yep they need to be well fed
@BigHeadClan
@BigHeadClan 3 жыл бұрын
The early vq35 did burn a bit of oil but it wasnt a huge issue until late in life and easily addressed with good oil and exhaust mod. Think my 02 altima only took 1/5 a liter every 2 months at around 200, 000km.
@draganbuhanovich6411
@draganbuhanovich6411 2 жыл бұрын
Oil throws from psv to the intake,oil can can help
@erwinsm10
@erwinsm10 3 жыл бұрын
Great AUTOPSY evaluation of this VQ engine . Explanation is clear and you are knowledgeable ! Thanks for making this .
@ahmadeshtaya8460
@ahmadeshtaya8460 3 жыл бұрын
A lot of effort, really impressive, keep up the good work
@speedkar99
@speedkar99 3 жыл бұрын
Thanks
@HUGOSACCOUNT
@HUGOSACCOUNT 3 жыл бұрын
Fun fact about the oil galley gasket job on the secondary timing cover....when I worked for Nissan, you couldn’t buy just the gasket....you had to buy the whole timing cover. That oil leak was usually what caused most of those chain tensioners to lose their tension and resulted in the chain rattling on cold starts.
@speedkar99
@speedkar99 3 жыл бұрын
Good to know
@hackdeez1075
@hackdeez1075 3 ай бұрын
They also don’t sell bushings for subframes they want you to replace the assembly (at least on VQ RWD chassis).
@kaizersousa4082
@kaizersousa4082 3 жыл бұрын
Recently purchased a Frontier with the VQ40, not knowing a lot about these engines I found this video very informative and well put together. Nice to listen to someone who really know their stuff👍👍
@speedkar99
@speedkar99 3 жыл бұрын
Thanks! I'm glad you appreciate my work and video style.
@mattcaser6581
@mattcaser6581 3 жыл бұрын
One of the very best youtube automotive creators. You are an excellent teacher.
@eohgee-1269
@eohgee-1269 Жыл бұрын
dude you are really good at explaining these engine break downs
@scottfirman
@scottfirman 3 жыл бұрын
Good explanation of this engine. The biggest issue on them is the plastic guide on the tensioner. The top of the arm snaps off and allows the plastic guide to slide down off the tensioner. I had to replace the chains and guides on my Quest. The tell tale rattle on start up that goes away after warm up really gives it away. I was told the engine needs to come out but it DOES NOT. I did it myself.
@Daniel-zh3qz
@Daniel-zh3qz 3 жыл бұрын
Interesting and nicely edited as always. Thank you!
@speedkar99
@speedkar99 3 жыл бұрын
You are welcome
@ajourneysaved4311
@ajourneysaved4311 2 жыл бұрын
Thank you. I have a 16 altima with a vq35de that has over 100k. I have never had any problems with the motor or transmission. With everything going on in the automotive industry, I want to keep it running. Great tutorial! 👌
@julioalbertopalomo968
@julioalbertopalomo968 2 жыл бұрын
Videos like this is what makes KZfaq such a great place
@ikeudechukwu5018
@ikeudechukwu5018 6 ай бұрын
Glorious engine. I ran this thing hard in a G35 for 15 years. It was modified. No naturally aspirated V6 ever beat me. I ran down v8 engines who were surprised how fast it was. The thought i had a turbo. If you modify it correctly with the right parts and change your oil using Royal Purple, this car performs like a little v8.
@yokobono1180
@yokobono1180 3 жыл бұрын
BRO i love this channel you really tend to stick to VQs and all nissan parts, dig it not many channels do that and its funny as well !
@speedkar99
@speedkar99 3 жыл бұрын
I actually did alot of Toyota and Honda videos initially. But when it comes to teardowns Nissan cars/parts are easier to find cheap. I know them like the back of my hand now haha.
@sheltonforester3707
@sheltonforester3707 2 жыл бұрын
You’re an incredible teacher, man! Thank you so much! This information is invaluable!
@motomarmot6544
@motomarmot6544 2 жыл бұрын
Bravo 👏👏👏. Thanks for taking the time to educate us, you knocked it out of the park sir.
@adammartin1507
@adammartin1507 2 жыл бұрын
You mentioned the chain rattling on cold startup and that made me realize that that’s probably what’s going on with my CRV. It’s a really brief rattle and then it sounds fine. These videos are great!
@joshuav1088
@joshuav1088 2 жыл бұрын
Yeah I have a civic Si 2007 with 250k miles does that every morning when cold but runs like a clock k series are the best I had so many k series engines and they are super reliable
@thetechlibrarian
@thetechlibrarian Жыл бұрын
Yeah my mil had a crv that did the same thing. My rav 2ar does the same thing and we bought that new and did 5k oil changes.
@jgranger2002
@jgranger2002 11 ай бұрын
The crv probably needs a new intake cam gear. It will get worse.
@gnotagnome24
@gnotagnome24 2 жыл бұрын
It's wild to me that they have the water pump INSIDE the engine. Amazing how many different ways there are to design a combustion engine.
@loganamurray64
@loganamurray64 2 жыл бұрын
Internal water pumps are unfortunately quite common these days. Audi, Chrysler and Ford all use them to name a few. Probably one of the most common engines in North America (the Ford 3.5 Ecoboost V6) uses an internal water pump
@Soloist1983
@Soloist1983 10 ай бұрын
What an exhaustive teardown. I own 2 Nissan/Infiniti's right now w/ VQ35DE's, this video gives me a much better mental image to reference when working on the car. Thankfully they haven't needed much outside of regular maintenance.
@tinman9341
@tinman9341 3 жыл бұрын
Great video here mate. Very informative and right to the point! Kudos!!!!
@omaribawn777
@omaribawn777 3 жыл бұрын
Wow, i really appreciate you videos. LOVE it and i learn SSSSSSOOOOOOOOOOOOOOOOOOOOOOoo much. Keep goinggg
@speedkar99
@speedkar99 3 жыл бұрын
Thanks. Keep learning
@xXPepePeppersXx
@xXPepePeppersXx 3 жыл бұрын
"Use my wife's toothbrush," mine's more important
@calebcolon5144
@calebcolon5144 3 жыл бұрын
Excellent explanation and teaching on this engine. Love the tooth brush as a pointer and direct cleaner.. I enjoyed your video.
@dddarien
@dddarien Жыл бұрын
This guy knows his stuff! Had a couple of these engines and most of the weak points he discussed I actually had issues with. Now I’m searching for the 2AZFE tear down
@japerezo75
@japerezo75 3 жыл бұрын
My 2010 Xterra has the 4.0L engine which is not as smooth as the VQ35 and once it reached 100K miles something happened, like 100 additional HP’s were released. It got super powerful all the sudden. Great engine.
@speedkar99
@speedkar99 3 жыл бұрын
Lol. Just broken in
@typicalgaming6068
@typicalgaming6068 3 жыл бұрын
speedkar99 is this real or you being sarcastic ? Mine has 100 k and it is a vq. Lol
@japerezo75
@japerezo75 3 жыл бұрын
Currently at 130K. Replaced sparks plugs (preventative, they were in good shape) and right hand side valve cover gasket because of dust accumulation looking dirty.
@daveyboy924
@daveyboy924 Жыл бұрын
Amazing breakdown of this engine. I had a g35 aero 6mt and it literally drank oil. I had all bolt ons with a light weight fly wheel stage 1 clutch and a stillen exhaust with headers. Pushed out 300rwhp on the dyno. One day didn’t top off the oil and like you said, spun a bearing instantly.
@speedkar99
@speedkar99 Жыл бұрын
Ouch!!
@revvolutions
@revvolutions 10 ай бұрын
I have a revup that drinks a quart of oil with every fill-up, I'm at 410k km and still going.
@duranbailiff5337
@duranbailiff5337 Жыл бұрын
I have had two of these engines in the 4 liter variety in a couple of Frontiers. Excellent motors and we've had zero regrets with either one.
@kylosolo8815
@kylosolo8815 3 жыл бұрын
Wow I actually watched your whole video great job man I own a 11 maxima and wanted to see the internals but other vids where......well I wasn't thinking about time you actually grabbed my attention great job man and a new subscriber
@MuffinKingStudios
@MuffinKingStudios 3 жыл бұрын
Great video. Very informative and funny. Keep it up, you deserve it
@speedkar99
@speedkar99 3 жыл бұрын
Thanks
@carbon_wavelight
@carbon_wavelight 3 жыл бұрын
yep sounds about right. I had the same problems with my KA24E. Chain tensioner was plastic and wore out, and the valve cover gasket leaked like a sieve. Best part about these engines is that they paint themselves! Great videos btw, love what you do here.
@speedkar99
@speedkar99 3 жыл бұрын
Thanks. Hoping for alot more to come.
@zolotovasoulmate7807
@zolotovasoulmate7807 3 жыл бұрын
When your valve cover gasket leaked, was it leaking air and causing your engine to shake too?
@carbon_wavelight
@carbon_wavelight 3 жыл бұрын
@@zolotovasoulmate7807 no it just seeped out when she was all warmed up and had oil pressure :/ It did have tons of cam lope though, but I always thought that was because it didn't have a balancing shaft
@zolotovasoulmate7807
@zolotovasoulmate7807 3 жыл бұрын
@@carbon_wavelight what is cam lope?
@nigelmcclure4125
@nigelmcclure4125 3 жыл бұрын
Man I always learn something brand spaken new about your engine videos thanx bro definitely keep them definitely coming because I just actually really do love your vids bud because every time I watch them im definitely always learning something brand spanking new about something that U never even knew before so thanx a ton bro
@uniqueone1653
@uniqueone1653 2 жыл бұрын
Thank you for your knowledge and time. I learn more from your video than in school or a shop.
@kevinvazquez2741
@kevinvazquez2741 3 жыл бұрын
250k Miles later a coolant pipe on the top part of the engine craacked while driving cross state and it blew the head gaskets i cried for that it was still a good strong engine.
@shanefraser7764
@shanefraser7764 3 жыл бұрын
VQ30DE all day ❤🌿🤘
@CadillacDriver
@CadillacDriver 3 жыл бұрын
Yeap. I have a '98 Cedric Brougham with that engine, and only 38,000km on her. It's a beautiful thing.
@shanefraser7764
@shanefraser7764 2 жыл бұрын
@@CadillacDriver ive got a 98 Cedric Gran Turismo, there are only 10 registered in new Zealand lol and only 3 like mine, i have the vq30De. old mate in my town had a cedric with a vq3odet, Cedrics and glorias and cimas are rare but nz has a few of each, Lots of jdm imports from jpn
@CadillacDriver
@CadillacDriver 2 жыл бұрын
@@shanefraser7764 I'm a Kiwi also bro.
@nohandlefound.
@nohandlefound. 2 жыл бұрын
Have a gloria with the vq30det engine, it's a pile of wank haha
@aidenpryde50
@aidenpryde50 3 жыл бұрын
thank you for the in-depth analysis of the engine as well as the tear down. I have an 03 track 350z and Im just getting ready to hand it off to my oldest. Now I have a much better understanding of what I will run into.
@speedkar99
@speedkar99 3 жыл бұрын
Oh yeah...good car and good engine but keep up on the oil
@JohnDelaney1969
@JohnDelaney1969 2 жыл бұрын
You are a machine! Never seen anyone who knew his stuff better!
@KayBertoss
@KayBertoss 3 жыл бұрын
Oh wow, awesome video! I had a 2003 Nissan Pathfinder with this engine. We bought it used as a lease return with 80,000km’s. In 2006. Just traded it in with 300,000km’s for a new Tacoma. The engine and transmission were still going strong. I did regular maintenance with oil changes every 5,000kms. IF I floored it, it would still get up and go. Burned about 1 litre of oil between oil changes. Not bad for a vehicle with that many Km’s. Also, drove it hard through the coastal mountains 8-9 times every year during the summer. Only had one real issue with it and that was the throttle body failing at 120,000kms. Cost me 1k to fix. Other than that just regular maintenance. Came with the 4spd Auto. Auto trans fluid was changed just once from the dealership at 120,000ks. No problems with it. Must have been the trans cooler it came with.
@speedkar99
@speedkar99 3 жыл бұрын
They sure can take a beating!
@LemonsGD
@LemonsGD 3 жыл бұрын
Symmetrical V6 timing chain setups always look so cool
@slumgaming8165
@slumgaming8165 2 жыл бұрын
Great video. I recently bought a G35 with this engine soo I just learned a lot. Thanks a lot for a great video.
@mattgruver2970
@mattgruver2970 Жыл бұрын
Thank you for such a great video describing some of the details during tear down, and mentioning weak points and implied items that should be addressed during a head-gasket replacement. This is a sophistocated engine. I'm doing a head-gasket replacement for my 2008 XTerra, and this video will help me immensly.
@speedkar99
@speedkar99 Жыл бұрын
Glad it'll help. I'm guessing there's more room to work on it in the trucks
@donaldbiden3131
@donaldbiden3131 3 жыл бұрын
I've had several infiniti with this engine i love it
@cleric670
@cleric670 3 жыл бұрын
Preface: Good video, always like your stuff. Gotta clear up a few misconceptions about the VQ35DE though. The oil doesn't mix with the coolant when the water pump fails, there is a little hole drilled in the side of the block just outside the pump, that's the traditional "weep hole". All DE motors have it both the RWD and transverse. Also the front galley gaskets inside the timing chain cover never had an issue leakingon the VQ35DE as you mentioned. That problem was almost exclusively on the VQ35HR motor which is a COMPLETELY different motor with basically zero interchangeable parts to the DE. Just to clarify, the HR is not just a beefed up version of the VQ35DE, it's an entire ground up rewrite of the ENTIRE platform with zero interchangeable parts, it has more in common with the newest VQ35VHR. "VQ" just means "variable cam timing, dual overhead cams, electronic port fuel injection". Hence why three generations of engines all start with VQ. The biggest issue with the valve covers is not warpage which I've literally never even heard of. The problem is the spark plug well tube seals are built into the valve cover and not individually replaceable. When they fail it typically involves getting entirely new valve covers. There is a way to drill out the existing and replace with ones that sort of fit but it's quite a pain. The buildup on the pistons is almost ALWAYS caused by the poor quality piston rings used in the DE, the cause excess blowby gas to the crankcase which increases oil vapor consumption through the PCV system, in addition to just sucking it off the walls of the cylinder, these engines do have oil squirters so there's plenty of oil to suck... Typically the lower plenum (which you had already removed from the engine, the part with the injectors is actually the intake manifold) will have a massive amount of oil in the center galley section.
@larryvercher9809
@larryvercher9809 9 ай бұрын
When the water pump fails the coolant does get into the oil pan. It did on my 02 Maxima se. No fun replacing water pump.
@yahdah-juleus1041
@yahdah-juleus1041 2 жыл бұрын
So glad I found your video as I plan on building my 2002 maxima w/ 6spd Mt and the 3.5de
@physics2817
@physics2817 8 ай бұрын
Incredible journey into my fav engine 😇 Thank you 🙏
@nowimhigh
@nowimhigh 3 жыл бұрын
The oil builds up on the top of the pistons and valves thanks to emissions. The pcv positive crankcase ventilation valve is vacuumed back to the lower plenum and on the driver side valve cover the extra pressure is ventilated into the intake tube. It also allows fresh air into the crankcase. I just installed an oil catch can and I have both banks running to a baffled set up. It's a closed system so it ventilates back to the lower plenum vacuum. It collects about an ounce of vapors, oil, blow by, etc month. I checked my plenum and it's clean as a whistle. Before when I installed my plenum spacer it wasn't too bad. But it did have oil residue throughout the plenum going down the intake manifold and into the intake valves. A made sure to run a can of seafoam through the brake booster vacuum into the plenum. Then while I did a tune up and changed the sparkplugs I squirted some sea foam down the spark plug hole onto the pistons. I moved the crank to move the pistons a bit. Squirted a little more sea foam and let it sit over night. I then cranked it up and it burned all of that carbon off the pistons and valves. It made a world of a difference and the OCC does do its job. I just got a cheap $20 one off ebay it has two inlets for both banks with a baffled filter set up. Then an outlet that you can either vent to atmosphere or run as a closed system running back to the plenum. I highly recommend doing this if you just purchased a higher mileage G35. Your engine will run so much smoother and stronger.
@speedkar99
@speedkar99 3 жыл бұрын
You'll see carbon build up on my next video worse than this...BMW!
@shadowsaiyan
@shadowsaiyan 3 жыл бұрын
The VQ is older than 20 years. The platform has been in production since 1995. It's ANCIENT.
@speedkar99
@speedkar99 3 жыл бұрын
Yeah the VQ has been around for a while but the VQ35 variant has been around since 2001
@BigHeadClan
@BigHeadClan 3 жыл бұрын
@@abrame8750 An engine is more than just its displacement or power per cylinder, the Mazda engine doesn't make as much power because it's design is focused to reduced emissions and fuel economy. That said I agree Nissn is arguably the best mass producer of 6 cylinder engines in the world.
@charlgrobler4967
@charlgrobler4967 Ай бұрын
I really appreciate you sharing such valuable knowledge. Thank you.
@Enigmaafk
@Enigmaafk 3 жыл бұрын
Very good channel when it comes to engine analysis:)👍🏽
@SPfg3388
@SPfg3388 2 жыл бұрын
This is the engine I have in my 2014 Infiniti. The service manager told me it's the best engine Infiniti ever put in their cars. He said that if properly maintained, it should easily last 200k miles.
@coachnutt61
@coachnutt61 2 жыл бұрын
I have a 07 Infiniti g35s I have close to 230k and still going strong. I drive it every day every where.
@jadend2760
@jadend2760 2 жыл бұрын
My Infiniti has 214720 on it right now and the only problem is a minor oil leak
@coachnutt61
@coachnutt61 2 жыл бұрын
@@jadend2760 mine will use about a quart between changes unless I run it hard on a long trip.
@i-55southstl55
@i-55southstl55 2 жыл бұрын
I got a 2006 m35 with 231,000 miles on it. I just put a full tuneup, 2 valve covers and gaskets and intake gaskets, brakes and rotors all around, now the water pump and thermostat next.
@bbc_junior4863
@bbc_junior4863 Жыл бұрын
I was just watching a video of a guy who had over 300k miles on a 2005 maxima, and another guy doing some acceleration runs in a 2004 maxima with 235k miles. So i definitely believe it
@VenturiLife
@VenturiLife 3 жыл бұрын
Great video and explanations. Nissan used these engines in many cars, as you stated they are a very solid powerplant overall.
@carlosalejandro7315
@carlosalejandro7315 3 жыл бұрын
This is such a masterclass 👍🏻
@marquettecosten8781
@marquettecosten8781 2 жыл бұрын
Impeccable review of the VQ engine.
@kennyvincentngodo7788
@kennyvincentngodo7788 3 жыл бұрын
I have an 2004 Maxima with exactly this engine. Am about to hit 200k and all i have at the moment is a P0400 code which I intentionally don't want to fix. Very fast, solid engine and good fuel economy for what it is. Just give it good oil and engine flush at oil change, you'll be fine. Thanks alot for this video! Love your work.
@speedkar99
@speedkar99 3 жыл бұрын
Thanks for your ownership experience. How's the CVT holding up?
@monkeywkeys3916
@monkeywkeys3916 3 жыл бұрын
Had that car. Fav V6
@chipb1193
@chipb1193 3 жыл бұрын
@@speedkar99 I think the 04 Maxima was still the 5 speed. I don’t think the Maxima had the CVT until 2007.
@kennyvincentngodo7788
@kennyvincentngodo7788 3 жыл бұрын
@@speedkar99 The 2004 maxima i own came with the descent reliable 4 speed auto. 2005 - 2006 came with the faster but not so reliable Aisin Warner 5 speed auto. CVT started from 2007 till date. So am very lucky!
@kennyvincentngodo7788
@kennyvincentngodo7788 3 жыл бұрын
@@chipb1193 Yes, you're right. For the Maxima SL model, 2004 came with 4 speed auto, 2005 - 2006 is the 5 speed auto. 2007 till date is the CVT.
@sukh.088
@sukh.088 3 жыл бұрын
Hey, I own a 1996 infiniti i30 with a VQ30DE engine, and I would love to learn more about these engines, what are some good upgrades, etc. .... Thank you!
@QSSCEO
@QSSCEO Жыл бұрын
Man... You explained this perfectly. Thanks for the Video.... You definitely know your engines.
@kevindyer1034
@kevindyer1034 Жыл бұрын
Amazing video my guy, the way to taught, and explained is the way i learn. You should be a teacher!!!
@Dcc357
@Dcc357 3 жыл бұрын
Toyota's 2GR-FE V6 is their version of the VQ35. Been in production for a very long time and still a strong, efficient motor.
@kkkkkkkkkkaaaaaaable
@kkkkkkkkkkaaaaaaable 3 жыл бұрын
anyone ask? no? didn't think so
@Dcc357
@Dcc357 3 жыл бұрын
@@kkkkkkkkkkaaaaaaable Okay boomer
@speedkar99
@speedkar99 3 жыл бұрын
Yep it's a good engine but the VQ has been around even longer!
@worldlinerai
@worldlinerai 3 жыл бұрын
The VQ engines came out when Toyota introduced the MZ engines. I remember Nissan using the VQ30DE engines for their Maxima back in 1999 (3.0 Liter was the standard class for car and minivan V6s back then) and the VQ35DE is just an upsized version. I’m glad Toyota created the GR series to replace the MZ since the MZ couldn’t keep up with most competitors.
@pushhrodd01
@pushhrodd01 3 жыл бұрын
The 2GR is very similar to the VQ35 I work at Toyota and the amount of similarity is insane
@mattlowe9913
@mattlowe9913 3 жыл бұрын
You’re like the AvE of automotive. Keep it up!
@speedkar99
@speedkar99 3 жыл бұрын
Thanks. I love doing this stuff.
@bryanderksen4448
@bryanderksen4448 3 жыл бұрын
He doesn't cuss enough to compete with AvE
@chrisgooi
@chrisgooi 3 жыл бұрын
Thank you for this great video. Very Detailed and informative, easy for everyone to understand. How nice if you could do a Merc M104 inline 6 engine tear up one day! Stay safe.
@Hello-pl2qe
@Hello-pl2qe 2 жыл бұрын
What a breakdown. Great video!
@exit5398
@exit5398 3 жыл бұрын
Great info in this, extremely accurate, minus one small portion on your final thoughts. You said that the transmissions that Nissan chose to mate with the VQ were all poor, but that statement only applies to the automatic transmissions, which were utter garbage. The manual transmission option from 2005+ was the CD009, and is touted as one of the best available 6 speed manual transmissions in the tuner world. There have even been a few drag race 350z's pushing 1000 bhp+ on stock transmission internals and a really beefy clutch without damaging the driveline.
@jimmyerbe768
@jimmyerbe768 2 жыл бұрын
So far knock on wood that my pathfinder with the 4.0 engine has not had a transmission problem it is a 2006 and I have about 300,000 miles on the transmission I am on my second engine and I pull a boat on a trailer quite a bit on long distances, My transmission has held up well I replaced the radiator as some had antifreeze. Enter the tranny fluid from a leek inside the radiator also added a oil cooler for the the long haul dragging the boat.
@daveyboy924
@daveyboy924 Жыл бұрын
Agreed. The cdoo9 6 speed manual is actually used in the Toyota Supra also mated up to the 2JZ. It can handle basically anything you thro at it. You can tell that Nissan and Toyota collaborated in putting that transmission in race ready cars. The 94 Supra is obviously a much better fit than the 03 g35, but still a good choice.
@danrgoodnight9345
@danrgoodnight9345 3 жыл бұрын
my '02 Maxima has the 3.5 V6 - Love It !
@speedkar99
@speedkar99 3 жыл бұрын
Good car
@thepurpleufo
@thepurpleufo 3 жыл бұрын
Great video...this guy knows what he's doing.
@CarlosAguilar-de8rq
@CarlosAguilar-de8rq 2 жыл бұрын
Bro your a beast!! I been in this trade for 11 years very well explained & very well performed!!
@speedkar99
@speedkar99 2 жыл бұрын
Thank you
Why Honda V6 Engines Haven't Changed For 25 Years
15:04
speedkar99
Рет қаралды 711 М.
НЕОБЫЧНЫЙ ЛЕДЕНЕЦ
00:49
Sveta Sollar
Рет қаралды 8 МЛН
Nissan VQ37VHR: Everything You Need to Know
8:00
Dust Runners Automotive Journal
Рет қаралды 123 М.
Why Subaru Engines FAIL
14:23
speedkar99
Рет қаралды 6 МЛН
Сборка двигателя vq35de.
39:34
Андрей Тагильский
Рет қаралды 30 М.
Cloyes: How To Service Timing Components 2002-2009 Nissan 3.5 L V6 Engines
10:12
Why Ford Ecoboost Engines Fail
21:41
speedkar99
Рет қаралды 143 М.
Ultimate VQ Engine Care | Oil Gallery Gaskets | 100k Mile Service Guide
1:06:36
Old black engine!! Bike starting Diesel engine starting
0:45
pendu Mughal
Рет қаралды 17 МЛН
Поставим водителю 5 баллов?🤣
0:49
HELEN YES
Рет қаралды 3,9 МЛН
BMW M AGRESİF GÖZLER 🔥😈💀 #bmw #shortvideo #keşfet
0:10
Bmwmpower
Рет қаралды 2,3 МЛН