G56 6 Speed Heavy Duty Case

  Рет қаралды 1,430

Long Range Gear

Long Range Gear

5 ай бұрын

Here is an excellent upgrade for Dodge Cummins platforms with 6 speed manual transmissions. The factory case is very weak and can cause massive damage internally, these upgraded cases help a TON in power capacity and longevity for your diesel truck. Contact us today to get set up with one!
Long Range Gear
(509) 499-0760
www.LRGdiesel.com
IG- ‪@longrangegear‬

Пікірлер: 10
@jameswalterswalterstransmi1933
@jameswalterswalterstransmi1933 2 ай бұрын
I'm working on a G56 and wondering if ther is a go no go spec on the synchros
@wanderingquestions7501
@wanderingquestions7501 5 ай бұрын
My ‘17 RAM Cummins 6.7 that just needed a turbo actuator at 72,000, and clutch at 86,000. I fully expected some new expense on that truck. But when I got the clutch in, I also had the shop put in a Banks intake elbow. Then some force took a hold of me and I got tunes on an EZLink, AND Banks Intercooler. With street and race tunes my cfm was limited at 400cfm with stock CAI. I switched to a KN oiled filter in the RAM CAI box. That took me to 422 cfm. I’ve just added the K&N turbo air intake pipe, replacing the stock air intake resonator/silencer. That didn’t improve cfm but in tests I found I picked up 4-5l% in manifolds density and lower their temps relative to the turbo air density’s temp. I then think what will break yet. I wonder if towing with the add power and torque wlll be too much for the GS6. I have a dual-disk clutch. This episode keenly impressed me , that - that’s the way to go.
@longrangegear
@longrangegear 5 ай бұрын
There’s still plenty of room to go with a G56 in your application. But I can’t recommend these cases enough.
@wanderingquestions7501
@wanderingquestions7501 5 ай бұрын
Thanks
@bryandepiazzy8679
@bryandepiazzy8679 5 ай бұрын
Wouldn’t an nv5600 be better in this situation with hi HP?
@longrangegear
@longrangegear 5 ай бұрын
In stock form I’d say yes, however the gain of the heavy case puts them close to the same level in my opinion, and there’s far less to change and far less investment than to convert the truck over to a 5600. Plus, very soon here we’ll have some billet gears that will rocket the G56 past the nv5600 in capacity.
@tes997
@tes997 4 ай бұрын
Where yall located? Thanks
@wanderingquestions7501
@wanderingquestions7501 5 ай бұрын
Are there tougher gear sets to fit the heavy case too?
@longrangegear
@longrangegear 5 ай бұрын
They’re tricking in. I have some billet components in hand and the rest are a few months out.
@wanderingquestions7501
@wanderingquestions7501 5 ай бұрын
Thanks
Valair vs South Bend Clutch
15:44
Long Range Gear
Рет қаралды 6 М.
How To Rebuild Your NV4500 Part 1- Parts and Prep
26:35
Long Range Gear
Рет қаралды 15 М.
Зачем он туда залез?
00:25
Vlad Samokatchik
Рет қаралды 3,3 МЛН
Beautiful gymnastics 😍☺️
00:15
Lexa_Merin
Рет қаралды 15 МЛН
Эффект Карбонаро и нестандартная коробка
01:00
История одного вокалиста
Рет қаралды 9 МЛН
Cool Items! New Gadgets, Smart Appliances 🌟 By 123 GO! House
00:18
123 GO! HOUSE
Рет қаралды 17 МЛН
We tear apart a good NV5600! Dodge Ram Cummins Diesel Six Speed
57:08
Long Range Gear
Рет қаралды 10 М.
1.1 MILLION MILE NV5600 TEARDOWN!
34:02
Long Range Gear
Рет қаралды 2,5 М.
This G56 is destroyed!
11:04
Long Range Gear
Рет қаралды 2,3 М.
NV4500 teardown- you wont believe this 5 speed's 5th gear problems!
38:18
NV5600 Low Oil Failure! Early style, small input destruction!
40:24
Long Range Gear
Рет қаралды 3,1 М.
How To Rebuild Your NV4500 Part 2- Assembly
38:58
Long Range Gear
Рет қаралды 3 М.
Oreilly's NV4500 Transmission Teardown
36:04
Long Range Gear
Рет қаралды 1 М.
NV4500 5th gear nut solutions explained
4:15
Long Range Gear
Рет қаралды 7 М.
Зачем он туда залез?
00:25
Vlad Samokatchik
Рет қаралды 3,3 МЛН