GAME CHANGER!! This Is Going To Add A Whole New Element To Our Shop!

Рет қаралды 372,606

Жыл бұрын

#fabrats #arcdroid #plasmacutting
We've had a new toy for a while, but haven't quite perfected it up until now. Check it out!
Make sure to follow along with us as we build and fabricate cool stuff!!
Get your own ArcDroid here:
bit.ly/3dy1W2B
We LOVE Onx Off-Road! Get 20% by using code FABRATS20 or click on this link:
webmap.onxmaps.com/purchase/o...
Get your own Fab Rat's Apparel Here:
www.thefabrats.com/
Videos you'll love:
A Mother's Worst Nightmare! How Did This Even Happen?
• A Mother's Worst Night...
We're Definitely Not In UTAH Anymore! What Did We Get Ourselves INTO?!
• We're Definitely Not I...
We Found A Nasty Surprise In The Seats Of The Firebird Barn Find.
• We Found A Nasty Surpr...
Will This Work? Racing Against Flooding and Quicksand!
• Will This Work? Racing...
We love Barnes 4x4. Check them out!
www.barnes4wd.com/?ApplyPromo...
Check out Yankum Ropes!!
bit.ly/yankumFABRATS
Use coupon code FABRATS at checkout to save 5% on your order!
Follow us on Instagram: FabRats
And THE FAB RATS Facebook page: / thefabrats
For business inquiries please email us at: thefabrats@gmail.com
Shipping Address:
Fab Rats
P.O. Box 234 or General Delivery
Glendale, UT 84729

Пікірлер: 786

@Sakratic Жыл бұрын

Love some older footage. It's when Randall gets to make a nice surprise appearance! Miss you Randall, hope all is well!

@tjshine8022 Жыл бұрын

I was like, "Hey, that's Randall behind the camera!"

@alanduncan8167 Жыл бұрын

Yip it was good to see Randall

@michaeltablet8577 Жыл бұрын

Me too

@jasonswift7098 Жыл бұрын

What are you on about who says its older footage

@carenclemmons5002 Жыл бұрын

Love hearing that sweet Randall voice quip back to whichever brother, Paul or Ben, happens to say something he can speak back to smartly. Wheee go have some fun together.

@levergun Жыл бұрын

VERY nice of the inventor to tutor you guys, and it was GREAT to see Randall. He is missed.

@bigtsperspective5831 Жыл бұрын

What an honor to have the man that built the machine in your own shop. Wow wee how cool that must have been for everyone 😊

@madmanmechanic8847 Жыл бұрын

When you are having troubles with it on you tube that is not a good thing bad for business so the guy thought well better go take care of this I dont need negative feed back on youtube

@russellhltn1396 Жыл бұрын

An honor, but also a smart move on his part. Making Paul successful with it is going to help his sales.

@jakerichardson7973 Жыл бұрын

And a very good learning opportunity for the designer also. He got to learn where Paul and Ben were getting stuck and will hopefully improve his teaching tools

@raulmartinez3632 Жыл бұрын

good to see Randall swinging the camera once again. good times. Fab Rats u guys rock.

@timothygeiger8271 Жыл бұрын

This is old footage. They have used that quite often in other videos.

@jasonharlow887 Жыл бұрын

I think this was recorded awhile ago Judging by the progress on the tow truck in the background

@myeyesaresmiling442 Жыл бұрын

Was thinking the same thing. Always nice to hear his voice from behind the camera and face in front of it.

@thatoneguy4life Жыл бұрын

This had to have been recorded a while back because he's used the machine in a few videos already lol

@TRCCtv Жыл бұрын

it's an old video

@ckamina768 Жыл бұрын

Good to see Randall again! Hope he is doing well in his new endeavors! Sure hope he visits once in a while!

@-_Robert_- Жыл бұрын

I bet it was old video. Thay have that Acrdroid from few videos ago.

@elvengods Жыл бұрын

He SHUD stick to one he shouldn't b.....skipping his jobs so much

@marvincarter870 Жыл бұрын

Oh yeah this machine is definitely a good asset to the shop. We've seen newer videos where Paul and Ben cut out gussets and other parts for the vehicle's. It was nice to see Randall making a visit to the shop even if it was an older video.

@mrfarmer532 Жыл бұрын

Loved the arctroid and hearing Randall in the shop 😊 good video 🎉

@steveboling2515 Жыл бұрын

Hearing Randle's voice just made me smile. Good to see and hear him again.

@ZachMauch Жыл бұрын

I was like. THAT 'S RANDLE!!!! HECK YES!!!

@dandydan2037 Жыл бұрын

Ok, been resisting but gotta say it. Everytime I see Paul and Ben working together it reminds me of Home Improvement. Ben is Al Borland to Paul's Tim Taylor... lol

@adamthomas4638 Жыл бұрын

Omg I never thought of that but your spot on ben is a cooler al borland

@albertstowel8613 Жыл бұрын

Lol , now every time I watch I think of home improvement. Michelle kinda looks like Jill to

@RobbBoswell Жыл бұрын

More power 🤘🏼🇺🇲 ooo ooo Ahhh

@paulrivers7248 Жыл бұрын

Yesssssss perfect

@hustlinghard8081 Жыл бұрын

Haha dangit, i can't unsee it now

@adriancp9957 Жыл бұрын

I recently got into the CNC Plasma table cutting business. It amazing how you start of with a lot of confusion and take baby steps. Once you get comfortable you'll be pushing the machine to its limits to find it's capabilities. Stick with it.

@olivier2553 Жыл бұрын

Some 40 years ago I had the idea of a machine like that, at least the part for tracing the contours. But I never managed to get it working. I have never been a good maker, there were too many mechanical errors. It was made to run on an Apple ][ computer. I am glad to finally see that my idea was not completely stupid even if I could not make it to work. Congratulations to the creator of the machine!

@inmyopinion6836 Жыл бұрын

Paul, please throw that doggone level away! Perfection comes from being flush, parallel or perpendicular to the piece you're working on. Get a good straight edge, a framing square and an angle protractor. I promise things will go much smother. Love those plasma tables!

@ModernDayTemplar606 Жыл бұрын

I wondered how this came to be part of the shop. So now we know and to have the designer willing to come to the shop and help with the setup shows his dedication for the product and customer. I think this was a very good investment for FabRats. It was also great to see Randel hope he is doing well.

@Patrick.Weightman Жыл бұрын

That Arcdroid is EXACTLY what I've been looking for, I'm definitely gonna keep them in mind. What a super cool guy flying out like that

@angrydingus5256 Жыл бұрын

I like that you've spent some time using the product before reviewing and showcasing it. I can tell this is an older video since Randal is filming and you're using the old bandsaw to cut the square tube

@lesaatuatasi6267 Жыл бұрын

Good to see Randall swinging the cam again. It's just like a CNC machine. You have to find where home is { 0 } than mark all your points and enter your cut out shape. G codes are pretty complicated on a CNC machine but, he simplified that which is pretty cool

@charlesirby9222 Жыл бұрын

This inventor is first cabin & he’s a helluva guy to come down there and school you boys! I hope you fed him well & gave him a big hug… I hope this tool makes him a MILLIONAIRE! …😎👍572

@jamesbigham9036 Жыл бұрын

I really like the arc droid it will definitely make things a lot easier. Seeing Randall was a very nice surprise

@DonAshcraft Жыл бұрын

"Arcdroid" coolest name ever. Did you see Ben almost glued to the arctroid guy, soaking up every technical aspect of it? Ben is another one of those quiet modest very bright guys.

@billburkart9087 Жыл бұрын

Wow this video is way behind. We've already seen you use it and the cameraman seems familiar. lol Any Fab-Rat video is worth watching.

@thelonewrangler1008 Жыл бұрын

I built a gantry style cutter a few years back and if I knew something like this was in the works I never would have wasted my time. It takes up so much space and all I ever really use it for is the smaller stuff that this machine is more than capable of. High five to the inventor!

@robert-vt1fq Жыл бұрын

I think that's fantastic that you showed up and helped you all God bless him and I think it's fantastic that he's helping you and you guys should make fantastic things and come out fantastic and you guys should look great God bless you and have fun I can't wait to see all the great things you guys may God bless you

@stig7657 Жыл бұрын

OOOHHHH I am really jealous... now that's a cool tool!!!

@johnme7049 Жыл бұрын

Hello Randall! We miss seeing you buddy. This is going to absolutely be a game changer in the custom fab world. And best of all for you guys, Matt is going to be SOooo jealous. :D That was so kind of Mr. Miller to come out and show you how it works and give some hands on instruction. BIG shout out and thank you to him! Good things are coming.😄 God Bless

@brucejr.5833 Жыл бұрын

This will make cutting brackets and braces so easy and they will be identical. Really cool machine. Props to the professor for stopping in.

@Thecowboy1950 Жыл бұрын

Yep well over 30 years ago I worked in a fab shop and we had a old electric eye cutting table you Drew your pattern with black Indian ink and your torch would follow that pattern and cut your parts out awesome machine and it was probably old technology even 30 years ago but I liked it

@paulhall170 Жыл бұрын

An old film, but great to see how you guys unboxed and set up the device! What a special moment to have the inventor pop in for a one-on-one tutorial, shows how much your channel is known and appreciated.

@Toyotarunner13 Жыл бұрын

So sick to have the GRIND HARD PLUMBING name drop !!🤘 you guys are two peas in a pod.

@golfmike304 Жыл бұрын

Paul is my kinda dude. “We’re going to build a 3’x4’ square box” 😂😂 Good to hear Randall in the shop. Sure miss ya Randall.

@frederickshipp8013 Жыл бұрын

Yeah we called them rectangle where I went to school. LOL

@webecamping0056 Жыл бұрын

That’s one little baddass CnC cuttin machine! Time and game changer…👍🏽

@SadPuppySoup Жыл бұрын

Look at how far we've come since the oxygen and acetylene days of my youth. And to have the man who designed it there to help you learn to use it must be a blessing.

@timpowell3255 Жыл бұрын

Cool. Little piece of machinery to have in the shop for what y'all do. Thanks for sharing your adventures and talents with us Sir ! 🤘😎

@ripvanrevs Жыл бұрын

My etch a sketch never did cool stuff like that

@kirk467 Жыл бұрын

I ran a shape cutter at the shop when I was still there, it had six cutting heads and I could hook up a plasma torch to it for other materials other than carbon steel! I was working in a machine shop/ fabrication shop and I would cut multiple parts to be machined! Sprockets, gears, flanges and blinds for multiple customers! It was pretty cool and I set it up with a mig gun for multiple welds on flanges and other circular parts! But the cool attraction was the water jet cutter and they have a couple machinist running those and they cut anything like rubber, wood and Teflon sheeting for Teflon flanges and gaskets! Those people made millions with what we had to do the many different jobs with! But I’m retired now and I don’t miss any of it because it was too stressful and lots of freakin overtime! Thanks for sharing Paul 👏🏻👏🏻👏🏻👏🏻👌🏻👌🏻🤙🏻🤙🏻🇺🇸🇺🇸

@craighull6910 Жыл бұрын

Great! Another tool I didn't know I needed until now.

@MrChrissnowden Жыл бұрын

306 people drinking coffee with me at the same time! Love the videos and hope to see ya at Carmel!

@thousandoaksauto1696 Жыл бұрын

Hey Paul, Thanks for having Andrew come out to demo that TOY, I mean, TOOL!! Now I have to get one for sure. When I saw the ad on KZfaq I saved the link, checked out the info and almost pulled the trigger. I'm locked & loaded now after seeing it on your channel! Thanks for helping me make that decision.

@montepatton9040 Жыл бұрын

Great to see Randal and hear his voice. That’s super cool that you got the main man himself down to train you on his setup and programming. That’s going to be an awesome addition to the shop.

@shanes_bs2659 Жыл бұрын

I was wondering if there was footage of setting the droid up. Also great to hear Randal again. I hope he stops by for appearances.

@justpain365 Жыл бұрын

Adding a lil extra "hand" isn't a bad idea when you can use it.... Go for it fella's 👍☕🥓🥓

@dalegereaux1863 Жыл бұрын

I worked with CNC equipment since 1979. Once you get it figured out it's like magic. If you're making lots of parts they all come out identical. But if you do it wrong they will all be wrong. So it's best to make sure the first one is right before you start making more.

@UncelJed Жыл бұрын

The best thing about a cnc cutter, plasma or anything else is the inherent ability to waste material. Hand layout allows for the use of more material with less waste.

@billbillinger2491 Жыл бұрын

I realize you built this a while ago, but still great to see the PPE being utilized! You are influencing a LOT of people in the world. 👍💪

@gregsmechanicshop5446 Жыл бұрын

That was nice for him to come down and show ya'll how to run that machine!

@ITubeTooInc Жыл бұрын

It's free advertising directly to his target audience. When a channel has almost 500.000 subscribers and growing very fast, many manufactures are willing to sponsor products and do guest aperances to promote their products. It would cost thounsands and thounsands of dollars in advertising fee to get anywhere near similar kind of promotin.

@MrGaryGG48 Жыл бұрын

It was nice for the "Professor" to come see Paul and his shop but it's also a smart move on his part. Paul is the kind of guy/shop anyone would like to have showing their equipment to a whole lot of new potential customers. This was a "win-win" solution to Paul's problem getting started with a new tool. He got some guidance from the "Source" and the "Source" got some great exposure to who knows how many new customers. Everybody benefits! 👍

@makingtechsense126 Жыл бұрын

Looks like a really neat tool. Glad that you got some hands-on training. Really cool that the owner/inventor came over.

@davidcat1455 Жыл бұрын

That’s what I need. Hands-on training. Just spent six frustrating hours trying to set my brand-new Arcdroid up.🤷Built a new table paying a lot of attention to get it exactly flat and level. Manufactured a boom that copies The track of the arcdroid to take the weight of the cable and the cutting torch. finally finished making the table and boom last night and spent most of today trying to figure it out. Never did get it to work. I think perhaps you need to be a lot more technologically competent than I am.

@henrycarlson7514 Жыл бұрын

So Wise , Thank You . A fine example , somebody designing some thing useful and some what affordable . A fine addition to the shop

@totaltreeservice4870 Жыл бұрын

we really miss Good old Randal around for sure , our best wishes wherever he's at !! Thanks for all the good videos Fabrats👍👋

@craigbowley6783 Жыл бұрын

Grind hard plumbing is awesome! Ethan is an absolute genius!

@Alconium Жыл бұрын

Cutting out a Fab Rats plate to tack onto the FJ would look way better than the door sticker IMO, though I do get that a big colorful sticker stands out on the trail more than a subtle cut out rusty plate.

@Nerffy Жыл бұрын

Great to meet the builder of the machine. He is a cool guy

@djsamples3777 Жыл бұрын

Good to see Randall!🏁

@terryroths4254 Жыл бұрын

wish I had that 30 years ago. Indeed a wonderful machine. Now..back to the tow truck.

@kimowensby3675 Жыл бұрын

Good to see Randall😊 We miss you!

@TrzCharlie Жыл бұрын

Paul: We're pretty much professionals now. You guys are great, I love that you show your screw ups along with your triumphs. Fab Rats is the real deal. I am hoping to meet you all one day. Michelle, thanks for another great edit. Charlie

@MrKounty01 Жыл бұрын

For us regular watchers it's good to see how your arcdroid came together. It has made alot of appearances lately

@ChuckHickl Жыл бұрын

The words coming out of Paul's mouth may be saying how excited he is but the abject look of fear in his eyes tells me a different story, something about old dogs and new tricks.

@mattchewynichols5217 Жыл бұрын

Older video recording ? I hear Randall!!! And Ben doesn't have his button up shirt lol

@jackreed3445 Жыл бұрын

It was good to hear Randall's voice and see him scurrying around running the camera. I think the camera operators should get an end credit on the videos. Looks like you will be able to cut a lot of brackets etc. now once you get the carboard templates sharper. Have fun but don't use up all your steel making ornaments, jack

@paulkoontz6095 Жыл бұрын

That is cool, always good to see Michelle. Y'all take care.

@vangoodwin7335 Жыл бұрын

Now you can copy Rory by putting FAB RATS into the steel fenders of the Tow Rig along with your Dad's name because it will always be his truck! Then you can show up Matt. Your Rig won't be as big but it'll sure be personalized! You are in my prayers Hoka Hey

@davidsnow1481 Жыл бұрын

It was good seeing Randall again hope everything is going well for him. That is a cool little plasma cutter yinz got there keep up the good work and stay safe out there.

@archieletsyouknow5508 Жыл бұрын

💯🇺🇸 Albuquerque New Mexico's in the house with support and much love to ALL FAB RAT subscribers👍🏼👊🏼✌🏼

@JanelleVocate-Ames Жыл бұрын

And thank you to Archie!!!🐿

@TheDanielsanti Жыл бұрын

Shoutout the 505!

@maxironpaw Жыл бұрын

Was nice seeing Randall in this older video. Have been wondering why we no longer see very much of Papa Dar.

@TDavis999 Жыл бұрын

That pose that Ben does while Paul is welding that second hinge needs to be on a shirt or a poster or something, with the title "Pose like your holding someone's welding job."

@soulsurfer8797 Жыл бұрын

I am totally buying one. True customer service. Owner comes to your shop. Wow, unbelievable. Restomod Mustang project about to totally go to the next level. 🙌🏾

@idonwanna4026 Жыл бұрын

That looks like a fun tool for sure. And, it was nice to see Randle again, too.

@johnperreault116 Жыл бұрын

I like how you do things right. Drill and tap, build solid hinges and the table grate was an excellent use of something that otherwise would have been junk

@waltermila Жыл бұрын

Do you guys want buy a cnc plasma table that I have? Cutting size area is 4ftx8ft , machine foot print is 5ftx10ft. It's here at my home in Salt Lake City Utah.

@trickster6831 Жыл бұрын

Should post the link to Arcdriod machines. Just a thought 🤔.

@kenguier8464 Жыл бұрын

I enjoyed seeing Randall in the shop again....Also like the new toy.... I do not do metal fabrication but I would love to have a unit like this.

@nopartsgarage6691 Жыл бұрын

Now I need one of those for up coming content. That's pretty slick tool for the shop.

@aaronmcconnell7358 Жыл бұрын

We need a visit from Randall sure miss him behind the camera. A arc Droid is definitely on my wish list

@robertmccullough4822 Жыл бұрын

The logo is great, but..... Keep using it on parts but at sometime....I think we would all love to see the "Rat"!!!! Consider it "Graduation". lol. Thanks Guys, and good to see Randall again!

@mannsonthemove2958 Жыл бұрын

Good to see old footage and one last hurrah with Randel. Nice job!

@justinknight2427 Жыл бұрын

I live in Portland Oregon and me and my father have been talking about taking a father-son trip down to Utah to meet you guys and bring you guys some goodies love your videos love how you guys are with your family I wish I lived closer so I can help you guys on a regular basis

@robertlemoine3500 Жыл бұрын

Thankyou,congratulations Fabs .

@michaelconley4863 Жыл бұрын

Man this channel has grown super fast .. I check in periodically and dang.. own your way to a Million Subs

@Big-chub69 Жыл бұрын

Just think of all the goodies you cab Fab up now, this is one KICK Ass Tool!!!Keep up the great work" Team FAB RATS"!!!

@UncleManuel Жыл бұрын

That really was a blast from the past! ... Get it? Blast. Because the plasma cutter uses compressed air... 🤪😁😇

@montegtaylor Жыл бұрын

Thanks for the knowledge.

@kevinhaley8625 Жыл бұрын

The pipe under the expanded metal put the pipe under the expanded metal frame and weld to the existing table side and just put a short bolt through it, works like a charm

@user-nu6cg9cb2e Жыл бұрын

Great ( grate ? ) video. ~4 min in . The grate will be destroyed over time. So, the next one should be made easier to replace. A bolt in or better yet hammer in. My suggestion would have been to use an angle frame. Wish I lived closer. Made in Canada eh! 😀

@troybilt6752 Жыл бұрын

Thank you for your time.

@kenmurray4232 Жыл бұрын

That's cool. I can see the time savings. Nice to see & hear Randell. I watched you using it but wondered when you got it. Thanks for sharing.

@scottmccargar8536 Жыл бұрын

Nice addition to the shop

@SMKreitzer1968 Жыл бұрын

How about that, awesome, cool addition to your shop! Great training on it too!

@stucook8622 Жыл бұрын

Good to Randall make a guest appearance. Thanks for the video!

@albertdehn8381 Жыл бұрын

Thanks for sharing 👍😀

@johnperry5102 Жыл бұрын

great video, like the new equipment you got, really moving along now, great job

@mjalco7410 Жыл бұрын

Looking forward to seeing what you cut out. Enjoy the new tool

@davetapani3253 Жыл бұрын

Now that's cool!! Thanks for the video.

@stephenpoe2037 Жыл бұрын

This Video has been on hold for a while ! So Glad you shared it with us. And what a Bonus to have the inventor provide instructions ! It's a handy tool for sure !

@originalghoul3738 Жыл бұрын

That is customer service, this guy I hope becomes the ultimate success because for him to come to Paul's place seeing him struggle and say nope Im coming to help you since you invested in me I am going to come and show you, that is rare indeed.

@seanworkman431 Жыл бұрын

I was wondering where that thing came from? Personalized service at it's best, what a top bloke.

@patriot8087 Жыл бұрын

Awesome tool to have in your shop.

@dave3301 Жыл бұрын

Thanks for sharing

@steelmill888 Жыл бұрын

Nice to see the shop getting some upgrades.I know it's something Paul has been wanting to do for sometime.Looks like Randell made a surprise appearance,

@danieleltis9429 Жыл бұрын

Looks a handy bit of kit 👌 looking forward to seeing it used and helping you out with custom part’s thanks for the videos! Dan uk 🇬🇧

@clinteastwood5718 Жыл бұрын

I've always wanted one of those! Thanks professor for the great episode.

@keithvanpolen9049 Жыл бұрын

Awesome video. Great to see Michelle and Randall.

@johnm4661 Жыл бұрын

what an impressive advantage in your shop ! ..and to have the inventor on site for tutorial !! wow. the whole family is intrigued. we've seen you use this device cutting supports & gussets on the Rat Tow truck (in background) but that after you gained experience, bunch of talented & capable folks in your shop !