Another Resistance Band Snapped During My Home Workout

Рет қаралды 2,447

2 ай бұрын

Workout Program: gamerbody.com
Resistance Bands:
► SunPow Resistance Bands: amzn.to/47oBwXz
► GEKU Resistance Bands Bar: amzn.to/3QLwhKC
► Step Platform: amzn.to/47qjTqy
► Felt Pads: amzn.to/3S3QqxO
► ACBEE J-hook Resistance Bands Handles: amzn.to/4aTZps2
► Serious Steel Fitness Band Guard: amzn.to/4crbNkl
► Boss Fitness Door Anchor: amzn.to/45Je3ia
► Holyluck Drawstring Bag: amzn.to/3ROiG6Z
► Wrap It: amzn.to/49xugt2
► Serious Steel Band Guard: amzn.to/3xj2Klk
► Harbinger Wrist Straps: amzn.to/4amoefU
Adjustable Dumbbells:
► Core Fitness Dumbbells: amzn.to/3VemHTT
Free Content:
► Subscribe: gamerbody.com/youtube
► Workout: gamerbody.com/
Please leave any comments/questions below for follow-up videos!
#ResistanceBands #Snapped #HomeGym
Note: prices for products may vary based on when you watch and click the link within the description of the video.
Affiliate Links: Affiliate links are present within the content. These affiliate links may lead you to third-party sites to purchase products or review any information. GamerBody LLC and the author are not responsible for any content displayed on those sites when accessed through the links. GamerBody and the Author will receive a commission for any promoted product you decide to purchase through a provided link. Affiliate, Copyright & Disclaimer: gamerbody.com/disclaimer/

Пікірлер: 57

@kthornsberry 2 ай бұрын

I’ve had two bands fail. I notice that they failed where they pass through a hook. I realized that I always hooked the strap at its same natural fold point. Now I make sure that I vary where they connect with a hook or edge. So far I haven’t had another failure.

@JariSatta 2 ай бұрын

I bench press 355 lbs so the solution for me was to layer more bands as to not stretch them to the fullest. I take snapped bands as achievement of strength. With 4 thickest bands (2 each hand) I can't even overhead press 50% of the way/range. No foot plate.

@danderson5084 2 ай бұрын

Happened to me too a few weeks ago as I mentioned in another vid, Undersun heavy band snapped not even under much tension. Heard nothing from them so much for them standing behind their products.

@GamerBody 2 ай бұрын

That's unfortunate. When I snapped the x-small band they replaced it immediately. I hope support hasnt gone down hill since.

@danderson5084 Ай бұрын

@@GamerBody Yeah I'm not impressed. The medium one has a nick in it too, I need to replace them.

@rockweapon7895 2 ай бұрын

You could try doing triceps overhead extensions and overhead press on the step plattform seated. In general I think everything is fine up to shoulder height with bands when using plattforms. Everything above is better seated, or I would say safer. I do like overhead presses standing as well as for triceps. But its a good deal doing it seated.

@GamerBody Ай бұрын

I might try that. I think the setup might be awkward, but I'll test it out. Thanks for the suggestion!

@rockweapon7895 Ай бұрын

@@GamerBody I found that crossing legs seated helps stabilizing posture while doing the movement, especially on the lower back. And I prefer the Innstar Bar over the geku bar for better pre stretch

@josephroa4475 2 ай бұрын

It’s happened to me before with Undersun and Quantam bands. You can also use door anchor at bottom of door with a climbing carabiner.

@HillbillyYEEHAA 2 ай бұрын

I'm sure if you message James, he'll have a new one sent out . I had an issue with one I bought for my sister in law, they replaced it immediately

@josephroa4475 2 ай бұрын

@@HillbillyYEEHAA it was a long time ago and yes they did replace it. They have great customer service.

@CoachRosenblatt Күн бұрын

Have you ever tried doing the overhead press or tricep overhead extensions from a kneeling position? I think its a great modification for these band sets. Also, how do I get in touch with you regarding new product reviews?

@Salemej 2 ай бұрын

I started wanting Undersun and similar brands, but first I bought a cheap 10 USD tube set because I was “learning” how I was supposed to train with a band. Never got to the point of needing even middle price bands. Maybe I've been very lucky but I've bought about 6 or so 10 USD sets both tube and loop style and only bands from 1 tube style set had failed. And believe me I'm paranoid about one of these snapping on my face so I never do any high point front exercise. I even think I neglect them because since I have many sets, one may be untouched for weeks, plus I'm lightly washing them after every workout. Please put that one in the recycling bin :)

@HughLeFitness 2 ай бұрын

Have you considered investing in a cable pulley system? You can simply just buy a few pulleys and cables and mount them to your pull up bar. They are cheap and the resistance curve is far superior to dumbbells and bands.

@GamerBody 2 ай бұрын

It's a good option, but I am trying to keep my home gym footprint small as I don't want to use my garage for it. If you have the space though and don't mind it taking up space, I am all for it as it is a great option.

@rustyboltskpears368 2 ай бұрын

Sorry to hear of your band snapping, I have one of mine snap in the past doing the same exercise as yourself my bands are Hapbear, i find these to be reasonable quality at a good price. How are you finding the Geku bar? I have one myself, I find the bar itself to be pretty solid. However When doing bench press using it I stack the bands and the hooks on the end have bent inwards. I wish they would make some heavier duty screw in hooks for this bar as it would be close to ideal if a little more robust.

@GamerBody Ай бұрын

So far so good for me with the GEKU bar (easily my favorite). I got as high as 3 Sunpow bands (purple, red & orange) without it bending on me. I could see it bending though if you are using different bands with greater resistance and more than I can use. I also agree that it would be awesome to make a "heavy duty" version or something of that nature.

@seriousblue6017 2 ай бұрын

Have you tried putting the band on the center of the bar then under the footplate like a triangle instead of parallel to the bar like a rectangle? It puts less stretch on the bands and you can easily stack for more tension, also the bands don't rub against your wrist which is a plus, works for me.

@GamerBody 2 ай бұрын

I think it would be a little awkward with the overhead press. Have you tried it with that exercise?

@seriousblue6017 2 ай бұрын

@@GamerBody yeah it's the primary way I ohp with bands, very comfortable.

@SandflailTraining 2 ай бұрын

Multiple layered bands will always be better than molded bands which I believe the sunpow bands are. I have snapped loads of cheaper bands but ones with 15 layers of latex or more in the manufacturing process I have never snapped.

@danderson5084 Ай бұрын

What brand? My Undersun set is falling apart, I need to replace.

@SandflailTraining Ай бұрын

@@danderson5084 in the US, Serious Steel, Rogue, Elite FTS and Harambe are all multiple layer process. In the UK Wolverson bands and Pullum bands are multi layered. I use Serious Steel and Wolverson (both 15 layers I believe) have never snapped one and they give you way more resistance than the standard molded bands (sun pow, undersun etc) at the same “resistance ratings” which is a good thing. On the cheaper bands I can overhead press the heaviest bands but in the multi layered that is not happening. Hope that helps. There are more layered latex bands on the market but that’s the ones I’ve used and can highly recommend. Bands are a massive part of my training and I’m very particular about the quality and longevity.

@rockweapon7895 Ай бұрын

@@SandflailTraining I have the same opinion. Working out with rogue or even better serious steel is more harder than training with molded bands like Undersun. My Rogue Bands started to split apart fast, but never tear or anything. And I try to avaoid using them with a setup where overstretching could occur, as well when using the serious steel.

@JoesLife89 2 ай бұрын

Youre pretty strong using that big band for shoulders. I use the x3 sysyem which is very overpriced, i know, but its never snapped on me and its so conventient to use. The bar is my favorite. Its 500 tho and it IS overpriced, but i pay because its the most premium experience, same with harambe system but i like the simplicity of X3.

@JoesLife89 2 ай бұрын

Note, I use the X3 Paraforce bands, they are upgraded bands but you must own the original X3 to buy them. They are my absolute favorite bands. They are much smaller than the normal bands but have the same force curve but even smoother. No powder crap. They are simply the best bands I've ever had.

@GamerBody 2 ай бұрын

I think it is inevitable I will test the X3 system at some point. Just to compare against what I think of my setup :)

@keith606 2 ай бұрын

I just received your entire band, platform and handle set up. Will also be receiving adjustable dumbbells. Do you find yourself gravitating to dumbbells or bands for some exercises? Which ones? That could be an interesting video in itself. Also, why do resistance bands when you have a Spediance Gym Monster? I didn’t see it in this video.

@GamerBody Ай бұрын

I personally do one specific style of training because of the different resistance curves the equipment provides. I don't mix them, but if you have to for some reason, you could, just make sure you push hard enough in a set to produce a great enough stimulus for growth at rest. I do have the Speediance Gym Monster, but the main reason I don't use it a lot is due to most individuals not being able to afford it, and I don't think it is necessary to get good results. Is it a great machine, YES, but isn't required for most people to achieve a good body.

@RTB_1234 2 ай бұрын

*Sunpow* resistance band is shown in the video. Never tried those. I have tried some generic cheap *Alllvocles* bands from Amazon that came in a set of four. The red ones in that set seem to always come with issues. The X3 bands I have seem to slowly be deteriorating. These are expensive and have that powdery crap. And finally, the *American Barbell* bands are the best quality bands I've tried so far. I'm confident in these but like everything, a snap is expected in the future. So far, none have snapped on me.

@GamerBody 2 ай бұрын

Nice, I may looks at the American Barbell ones.

@Mrwatson185 2 ай бұрын

Snapped my first band on the overhead press as well. I noticed the geku bar frayed my bands due to the weld (or bend idk which it is) so that might have contributed to the failure. Unfortunately my bicep did get clipped when it snapped and left a nasty bruise.

@GamerBody 2 ай бұрын

Ouch! Hmm Ill have to look at the GEKU again. It is interesting that I never had a large band snap with my older setup, but I do love the GEKU so I hope it isn't the cause.

@Mrwatson185 2 ай бұрын

@@GamerBody 100% could be user error. Did make me more conscious of exercises I do with bands.

@RoshanDesaiphl0923 2 ай бұрын

i have Undersun Bands :)

@reginaldhblackwood8474 2 ай бұрын

Switch to VRTX Fabric resistance bands. They will never snap and are 100% safe. SAFETY FIRST.

@RTB_1234 2 ай бұрын

No.

@GamerBody 2 ай бұрын

I think they could still snap, but I may look into them as well. I think the only problem is tension and double vs single loop bands and how many I would need depending on the setup. Do you use loop style, or tube?

@brownpanda8320 2 ай бұрын

I have them as well, i enjoy the fact you don't really even need gloves when using them.

@leakyabstraction Ай бұрын

ALL of my bands snapped after around 2 years. They're simply disintegrating. I just snapped my thickest one - while not doing anything crazy with it - and I'm super annoyed.

@GamerBody Ай бұрын

Got 2 years, but it is annoying when they do snap.

@user-ci9qi5do5p 2 ай бұрын

Hope you can make a review of the Flexicon Band machine by Bodylastics. Thanks 👍

@GamerBody Ай бұрын

This looks like a very large contraption with resistance bands. I'll keep an eye on it, but not likely I will use it anytime soon.

@owezzel 2 ай бұрын

It is the platform😅 over time the it slowly wears out the band. The only way you can prove it isn’t the platform is if you put the band in the same position every time.

@trevorgoodman3027 2 ай бұрын

Its the nature of bands, they will eventually snap no matter how you use it

@owezzel 2 ай бұрын

@@trevorgoodman3027 My point is the platform speeds up the process of it snapping.

@GamerBody 2 ай бұрын

Why do you think the platform wears out the band? There may be a little bit of friction so it is possible, but it will happen even if I stood on it. The platform has a 1 inch cutout that is rounded as well to reduce the wear (even if it technically wasn't made for bands)

@rockweapon7895 Ай бұрын

@@GamerBody I put the band guard or a towel around bands for less friction and a better more smooth movement when attaching onto a bar, bench or plattform. I know the towel could be a bit of a hassle, but its worth it. I only use the towel with the step because the band guard is not long enough. But on the Wii Fit balance board with the band guard and multiple felt pads to heighten up the board, is just so much better. Also to even out resistance on both sides so you make sure you have equal resistance

@nathanbutler-powell37 2 ай бұрын

Would you try seated shoulder press?

@GamerBody 2 ай бұрын

I've never tried it, but might work sitting on the platform. Not sure what stretch would be like, but if I double loop it it, it might work. I'll think on that :)

@rockweapon7895 2 ай бұрын

@@GamerBody I think double looping is way to aggressive because on the peak you probably on shoulder height as if you would stand

@nathanbutler-powell37 2 ай бұрын

@@GamerBody i use the same platform as you and single loop the bands. You may just have to add in multiple bands to get the tension right. I also do it for overhead tricep extensions

@Alex-el5iw 2 ай бұрын

Are you interested in rowing machines?

@GamerBody 2 ай бұрын

No. They are fine if you want too, I just don't care for how much space they take. I have a rowing machine for the Speediance, but it is just a lot for my small area.

@Alex-el5iw Ай бұрын

@@GamerBody If there is a rowing machine that can be folded into a chair, would you consider it?

@stevemeloccaro891 2 ай бұрын

i pushed iron for 40+yrs, when I reached about 63 I added bands, now strictly bands IMO rogue SEEMS to be the best loops i have used them daily for about 5 yrs and haven't snapped one, and i use them at full extension quite often, now tubes I bought bodylastics. IMO there JUNK, I had walmart tubes last longer, and I payed a good penny for them, I have had there anchors shred (they replaced them), but the tubes snap where connected to the hooks, they don't stretch as far as they advertise

@GamerBody Ай бұрын

I'll take a look at the Rogue bands!