Garage Door ROLLER Replacement How-To Video, Rollers For $40

Рет қаралды 19,917

Күн бұрын

Watch this video to learn how to replace, or install, new upgraded NYLON garage door rollers for smoother operation and to reduce noise!
Garage door rollers should be replaced every 10 to 15 years. Ball bearings within the roller will break down over time causing the stem to become loose from the wheel. Complete failure may occur as the roller gets older. This can cause the roller to come completely out of the track, and/or cause the door to get jammed.
Replacing the garage door rollers is something that a DIY'er can do. A word of CAUTION though... never remove the screws from the bottom fixture that holds the bottom roller in place. This plate is under the full tension of the spring where it is connected to the cable.
Please follow the method shown in this video to SAFELY replace your garage door rollers.
We sell quiet and durable nylon rollers for JUST $40 (shipping is included!) ,and other garage door parts on our secure online e-commerce site. Order your parts today and you will have them usually within 2 to 5 days (shipping times vary depending on location).
TO ORDER ROLLERS please visit:
www.parts4garagedoors.com/sho...
FOR ALL OTHER PARTS:
www.parts4garagedoors.com/
FOR GARAGE DOOR REPAIR in the Houston area:
spectrumoverheaddoor.com/
Thank you for watching our how-to video.
Please LIKE, COMMENT, and SUBSCRIBE if you found our content to be useful.
Have a blessed day!
-Travis

Пікірлер: 18

@davev5112 Ай бұрын

Excellent video. Bending the track is NO issue. Easy. Thanks!

@SoniaBDorsey 2 жыл бұрын

So about 2 weeks ago, my daughter and I went to your store in Katy and purchased 4 16ft garage panels, rollers, drums, tool to wind tension spring, and the chords that goes on drum. It was on Saturday morning. Your worker that day helped me to load up my trailer, secure everything down, and demonstrated how to repair and replace everything and what to do with the tension spring. I replaced and repaired my garage system and felt quite accomplished after doing so. I also replaced the existing chain system to Chamberlain belt drive. My husband was shocked and is still telling all his friends that his wife fixed the garage! My daughter walks around singing the hit song, “She’s a bad mamma jamma!” Hey, thanks for instilling a level of confidence in me to do this and not hire this job out. I learned a ton of information and wanted to share this success story with you guys.

@parts4garagedoors278 2 жыл бұрын

Thanks for your patronage!

@JBun-qd1fw 9 ай бұрын

THAT WAS THE EASIEST AND BEST INSTRUCTION VIDEO OF THE 20 I WATCHED. YOU SHORT VIDEO IS ALL ANYONE NEEDS TO WATCH. THANK YOU!!!!!

@levelupgaragedoor5443 Жыл бұрын

Wow , that's a faster process to replace the rollers than I have been using. I'll try that next time. Good video.

@homemovies751 10 ай бұрын

Just excellent. Thanks.

@domenickforte2051 2 ай бұрын

When I change my rollers especially the bottom set that has a load. I just remove the bottom section of track remove the bottom roller and replace then just put the bottom track section back on. Think it’s better then bending the track

@gerardovasconcelos5444 2 жыл бұрын

Door Trolley rope broke, how do i fix, everything its in good shape. can you help me? thx

@johndonald3667 2 жыл бұрын

I can’t see the link that you mention.

@alexandremuzinga8355 Жыл бұрын

Hallo were to get you to buy

@carlsondexter2108 3 жыл бұрын

We recently moved and inherited some CHI garage door openers. We need additional remotes but I cannot find universal remotes that list compatibility with C.H.I. Any ideas where I could get compatible remotes?

@parts4garagedoors278 3 жыл бұрын

CHI is the door manufacturers name. Look up in the motor or under the light lens for the name of your motor and you should be able to find a remote that will sync to it.

@sandeclark884 2 жыл бұрын

You didn't say but I assume you pulled the disconnect cord from the automatic opener. I did this first time some years ago and I wouldn't have known to do that my first time senior lady diyer.

@parts4garagedoors278 2 жыл бұрын

Great advice!

@douglasdever6134 Жыл бұрын

You can remove all the rollers by simply removing the bracket/hinge. Bottom one requires locking the bottom one at full open, then remove opposite side.