10:20 is one of the proudest memes I've made, not sure if I can ever top it. Very scared of running out of Potter jokes down the line so if you have any super obscure ones drop a comment!

"Only a flesh wound" is the same energy as "Tis but a scratch!"

Sorry for your loss mate 😥 It's awesome that you have the connection to your grandpa through your work. Keep up the awesome work and keep him close with you.

Your ability to perfectly match these wands to their resin ones is absolutely outstanding. Can't wait for all the wands to be made. You are a master wand maker. And we are glad to be able to see your work.😁

Best one yet. I love the incorporation of a real knot instead of faking it. That way, the grain matches how it would really flow around a real knot (because it is real).

I think that where it went wrong with the steel wool and vinegar is you sealed it off inside of a jar. If you had let it get more oxygen by leaving the lid off and allowed the steel wool to rust more it might have worked better. It's the rust in the vinegar mixture that helps it stain oak. You did do a pretty good job making a close copy of the wand you were going for.

Yours looks even better than the original! Awesome work.

These are a lot of fun to watch. The little edits you throw in here and there are really clever, and it's obvious you're really enjoying what you do. Great work, man. Keep 'em comin'.

Wow, what a piece of engineering sir! Pewter-turning with a screwdriver had my heart in my mouth, but you made it work- superb! 😅🏆

Every time I’m blown away. You’re so talented, and these videos are the best! They’re interestingly informative, clever and funny, and just overall cool 😎. Thank you for making them.

You are doing your grandpa proud, I think he would be very pleased with where you are taking what he helped start. You now I seem to have missed something in the other builds, this is the first one where Ive seen you put a core in a wand, so Im off to have a look for more now. This is a very cool share ...thankyou

I work picture frame shop and we occasionally use ebonizing solution on walnut frames. It’s a really cool finish and a ton of fun to use, but every wood reacts different since it’s a chemical reaction, white oak seems to turn a sort of grey while walnut properly ebonizes and turns nearly black, some woods don’t react at all Side note, the solution is usually a dark yellow color and turns paper towels pinkish strangely enough

Welcome back! We missed you!

this is so cool. you definitely need to show off the final wand longer, we wanna bask in every little detail. Ideally 1-2 min of glamor shots

"Alastor, we Never use transfiguration as a punishment, surely dumbeldore told you that"

WOW! Your craftsmanship has crossed many levels now. 💥💥 Can you make Snape's wand next?

another great wand❤ you say your making every wand, if so id love to see trewlawneys

Sorry for your loss. I hope he'd be proud of this one. I like it a lot. The rougher texture you gave it with the brush looks more realistic and authentic to me. BTW, I think the ebonizing solution may have failed due to an oil or wax protectorant on the steel wool. Maybe iron nails would work better.

alastor moody probably one of the strongest, Ex-Auror's and member of the order, he's a highly skilled versatile wizard when it comes to defense quick reaction, and fighting off dark wizards, he may no longer be an auror, but did he still kick ass though, unfortunate that he died though, but hey can't deny he was one the best if not greatest wizards at his day and age, a shame we didn't get more of him, we technically did when Jr. disguised himself as moody, and a little bit in order of the phenix, deathly hallows pt.1 Either way, awesome work, you pulled this wand off amazingly and honestly I like mad eyes wand alot, just the way it looks XP

Im so happy that you’re back! and can wait to see your other planned vids 😫🙏

Wands up for wood turning grandpa. Keep the artistry going, great work on this one!

When making ebonizing solution, make sure to fully wash and strip the protective oil from the steel wool first before putting it in vinegar. It also helps if you use higher concentration vinegar such as cleaning vinegar rather than cooking vinegar. You might also have to wait for 6 days for it to get to a better concentration, but I think the reason it didn’t break down at all in 3 days was due to the steel wool still having oil on it as a barrier to the vinegar These videos are some of my favorite on all of KZfaq, not only because of the excellent craftsmanship and love put into every wand, but how you show figuring out the entire process and your great sense of humor. I’ll be here for the whole journey and I can’t wait to see more wands, they are works of art!

This is insane! Your videos get better and better mate

This might be my favorite.

Anxious to see Narcissa's Wand,Haha it's my favourite (kisses from brazil 🇧🇷)

i absolutely love these videos. cannot wait for the next one!

Wow how do you make it look that good

Absolutely Beautiful!

It’s very wonderful. I wish we have you in Thailand. Wait for twins weasley’s wands

My mans on the mission to open a wand shop! 😁

So cool his attention to detail like, I almost couldn’t tell which wand was the wood one and which one was the resin one

You're amazing! Congrats from Brazil!

God do I LOVE this channel!!!!

Your version looks much better. It'd make Mad Eye proud

Amazing job ❤

Just a tip on making vinegaroon- leave the steel wool in the vinegar until it fully dissolves. It can take a week or so. Best to keep it someplace warm as the reaction goes slowly when colder. Don’t try heating it like on a stove to hurry it up as that just drives off the acetic acid. Other than that, terrific effort.

badibodobodoooo 🎼🎶 (Patreon link in description! X)

love this wand i think u did a great job id love to see the fantastic beasts wands when u finish the harry potter wands❤

Yours looks loads better. 👍👍

Another beautiful work 👍👍

as always a masterful job

Well done.

This is amazing!

Bro I'm such a fan! I love your videos, especially how you edit parts of the movies in and out. I can't stop laughing lol. Awesome bro👍

Amazing video as always. Can't wait to see the rest. You are a master wand maker.😁

I called those little bumps around the end of the wand warts in my opinion cuz they're a pain in the ass just as much as real warts lol.

Just looking at the wand I'd say it was made from blackthorn. It is shaped like a shileighlie.

The way the wood looks in the replica makes me think of a Shillelagh (Blackthorn cane). I would have went with Blackthorn for his wand just on the knob and the colors they went with but that is my personal opinion.

Love these videos! Makes a bad day better every time a new one pops up 👍

I look forward to hagrid’s wand. It probably doesn’t need to be functional.

His wand looks as if it's intended to look like a blackthorn cane or club

Supposedly the noble collections version of this wand is scaled up for display purposes, which is evident when you compare it to the size in the movies. Regardless, your work is amazing.

amazing as always

If you want to make ebonising fluid you need 0000 wire wool the very fine one and leave it for a couple of weeks releasing any gases as you go.

Hello! I am a huge fan of your work! Around Easter I have actually tried making your Arthur Weasley wand myself on my lathe and it turned out pretty good if I say so myself.😊 (But not as good as yours of course)

This is so good haha

It's still really far away, but I've always wondered how they made Dumbledore's first wand from Fantastic Beasts.

Just curious if you can make Barty Crouch Jr’s wand.

I miss your videos!!

I don’t know anything about wood staining but quite a lot about colour theory, so what would happen if you stain it twice to get the proper undertones? Since stain isn’t opaque, in my mind it might work?

I bought one of your wands and they are amazing 🛠️🛠️🔪🪓🪚

the shape and color of the knob makes me think it was made of blackthorn

love ittttttt!

Unfortunately you need to do it again but I'll happily take the first off your hands, jk is perfect

Hand-starting the pillar drill looks kind of cool looking, though might be dangerous

The black package probably contains spruce, the one you’re waiting for might be dogwood, and Horace Slughorn’s wand is, interestingly enough, made of cedar. (If you’re ever thinking of making Charlie Weasley’s current wand, my bet would be on chestnut.)

the wand you made and have is Mad eye's wand from Deathly Hallows

Giỏi hơn ông Ollivander 😂

It IS made out if Black Thorn wood originaly

Nymphadora Tongs maybe?

Excellent video love the wands the reason why your Ebonising solution didn't work is because you need to use apple cider vinegar it's a stronger acid and the wood needs to have tanning in it so you can also buy and make your own tanin solution using almond leaves or brewers tanin powder another and quicker way of Ebonising is to use Indian ink

Will you make fleur's wand as well next? I love your works!

please make Horatio Slughorn's wand next time

what woods are you planning on making the twins wands out of?

It's time to make snape's wand

Ive got a gold fish called madeye because its got different coloured eyes 😂😂

Could you make professor snape wand pls

So Fred, George and Slughorn are next huh? Well I’ll say this, good luck with those ones, especially Fred’s wand (the pine-cone like one) cause that handle looks like it’s going to be a nightmare to make without risking snapping some of them off multiple times George is probably easiest, though the broomstick shape might take a bit of time And as for Slughorn, I’m sure you’ve got something special planned for the slug head and the wavy, bendy shaft right, but I actually own a Slughorn wand replica at home and the shaft is probably the skinniest one of the bunch

Fred's wand is going to have reed, isn't it? I've always been curious about that one, since it's my birthwood and I eventually want to make a wand from that

Tbh where can I buy your wand

What kind of wood from America would you like maybe I can help you

Better than ollivander

Lol, I think that is stainless steel wool form the colour, isn't it? I'm guessing your trick only works with propper old school iron.

Can you make Tina Goldstein's wand?

Im 99% sure his wand is meant to be irish blackthorne.

I don't want to be you when will come the time to make Harry's wand which is just...a branch, but with broken pieces, turning it will take 10min, carving will take days.

19:00 are you sure that you’re not a woodpecker reincarnated as a human?

Soooooo....the terminator androids were made of cheap metal. 🤔 🤣🤣🤣🤣🤣

Cant afford silver ? With the amount of adverts on your videos you could afford gold.

"Only a flesh wound." Where is the Knight, from Monty Python and the Holy Grail, when you need him?

Please make of Spielman wand