Gas Training - Testing Safety Devices Gas Boiler Fault Finding

No video

Gas Training - Testing Safety Devices Gas Boiler Fault Finding - Flame Rectification TB118

Рет қаралды 12,699

3 жыл бұрын

#Plumber #GasTraining Viva Training Academy
Gas Training. How a boiler works. How Flame Rectification works.
Always do TB118

Пікірлер: 51

@cammytheplumber7243 3 жыл бұрын

Pick up so many useful tips watching these video’s. Thankyou Allen and Roy for all the effort you put in to making them. 👍

@tokomac7728 2 жыл бұрын

It is worth to mention that earth must be in order regarding wiring of the gas boiler….otherwise rectification would not work

@sheriefgerges7789 3 жыл бұрын

You and Roy doing amazing support for new engineers like me Thank A lot

@AllenHart999 3 жыл бұрын

Thank You.

@mcginn002 3 жыл бұрын

Allen really appreciate the efforts you and Roy put into these videos , keep up the good work

@AllenHart999 3 жыл бұрын

Thank You.

@adam1is1 2 жыл бұрын

Allen these videos are absolutely fantastic. Roy is an amazing teacher

@haroldwebster1459 2 жыл бұрын

Very useful but you need to get the camera showing your actual connections to the rectification probe.

@user-yw6qb9tt7t 3 жыл бұрын

Great video. Thanks again Alan and the team 👏

@AllenHart999 3 жыл бұрын

Thank You.

@45graham45 Жыл бұрын

I'm a little confused. What is the lead that you attached the Multi Meter to? You said you removed it from the rectification probe, but surely, if you removed the lead then the rectification probe is not connected & so the system would go into lock-out - but it didn't lock-out (until you turned off the gas supply). Why is this?

@brenndonherbert4583 3 жыл бұрын

Great video as always both and thanks for all the effort you put in.

@muhammadAli-kd2zp 3 жыл бұрын

Thank you Allan and Roy 👍

@AllenHart999 3 жыл бұрын

Thank You.

@antonybuckley2645 2 жыл бұрын

Great info

@emmanueljouille7012 3 жыл бұрын

Thank you very much. Clear informations top notches

@AllenHart999 3 жыл бұрын

Thank You.

@leehazelwood6471 3 жыл бұрын

Brilliant video, nice work guys.

@AllenHart999 3 жыл бұрын

Thank You.

@MichaelATH 7 ай бұрын

Nice video but one thing I notice on various videos, not just here, is people switching units while they are explaining things. That’s fine for me, but guys and girls who aren’t familiar with this can cause confusion. Volts and amps are to different things , are measured two different ways.

@stevenblack9644 2 жыл бұрын

Great help chaps keep up the good work

@jeffreyfarr4582 3 жыл бұрын

Hi allen, thanks for the video, really great help!

@AllenHart999 3 жыл бұрын

Thank You.

@fredjennings9268 3 жыл бұрын

Thanks for sharing- Top Notch👍👍🔧

@AllenHart999 3 жыл бұрын

Thank You.

@gopalanabi 3 жыл бұрын

really helpful ROY

@rayc1503 3 жыл бұрын

Excellent work guys, thanks for all your efforts. Could you gear towards some Lpg? It would be nice if you could refresh on the BBU's and also warm air units 👍

@AllenHart999 3 жыл бұрын

I will look into this. Thank You.

@hafiddja2460 2 жыл бұрын

Thank you Alan

@jamesphelan9588 3 жыл бұрын

Great vid👍👍

@AllenHart999 3 жыл бұрын

Thank You.

@maxrenshaw9899 3 жыл бұрын

Great vid!

@themanftheworld8439 3 жыл бұрын

Hi Allen Can you do a video soon about the site ing of an internal condensate pipe and joining of fittings procedure.? Thanks.

@AllenHart999 3 жыл бұрын

Yes no problem. Thank You.

@philipparker7475 3 жыл бұрын

Question for Roy: assuming one has a meter capable of reading down to microamps, would it be better to measure the current flowing through the sensor circuit, or, as you've described, measure the voltage of the sensor circuit? Thanks for all of the fantastic videos they've been a massive help.

@royfugler9971 3 жыл бұрын

Hi Philip, Thanks for the feedback, it's much appreciated. I have used both methods, it all depends on the Multimeter, and what scales it has. I find most new engineers understand voltages better than microamps.

@kevincranfield5235 3 жыл бұрын

Measure what the pcb is measuring, which is micro amps. Voltage will not tell you anything worth knowing, measuring micro amps will inform you of the ionisation occurring which if your clever enough can tell you so much information regarding flame ferocity, burner pressure, perfect combustion and the stochiometric point etc.

@45graham45 Жыл бұрын

@@kevincranfield5235 I presume you mean milli Amps (mA)? What is the expected range of mA if current was measured?

@plumbingwithbigphil6697 3 жыл бұрын

Big up yaself Al & Roy

@AllenHart999 3 жыл бұрын

Thank You.

@stephenrowen9435 2 жыл бұрын

I thought that doing that test with the test leads being inline it you would be in amps scale and not DCV but you have a viable reading I will try this along with reading in milliamperes

@gopalanabi 3 жыл бұрын

Hi thank you for very useful video, may i know what is the different between operating pressure and working pressure